1. Introduction
This manual provides comprehensive instructions for the Gvirtue Universal Remote Control SN-14+L, designed as a direct replacement and universal controller for a wide range of Sony TVs. This remote offers easy setup and intuitive control over your television's functions.

Image 1.1: The Gvirtue Universal Remote Control SN-14+L, designed for Sony TVs.
Video 1.1: An overview of the Gvirtue Replacement Universal Remote for Sony TV.
2. Setup
2.1 Battery Installation
The remote control requires two (2) AAA batteries (not included). To install:
- Open the battery compartment cover on the back of the remote.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment.
- Close the battery compartment cover securely.

Image 2.1: Illustration of the battery compartment requiring two AAA batteries.
2.2 Initial Operation (No Programming Required)
For most Sony TVs, the Gvirtue SN-14+L remote control is ready to use immediately after battery installation. No programming or setup is typically required for 99% of Sony TV models.
2.3 Learning Function
This remote features a learning function, allowing it to acquire codes or functions from your original remote control. This is useful for specific functions not pre-programmed or for consolidating controls. Refer to the detailed instructions provided with the remote for the learning procedure, which typically involves aligning the IR emitters of both remotes.

Image 2.2: The remote's learning function requires an original IR remote, positioned about 1 inch away.
3. Operating Instructions
3.1 Button Functions
Familiarize yourself with the layout and function of each button on your Gvirtue remote control:

Image 3.1: Detailed breakdown of each button's function on the remote control.
- POWER: Turns the TV on and off.
- Color buttons (YELLOW/BLUE/RED/GREEN): Shortcut keys for interactive functions.
- FOOTBALL: Activates the