1. Introduction
The SnapPad Xtra RV Leveling Pads are designed to provide permanent stabilization and protection for your RV's leveling system. This 6-pack of Xtra Round 9 pads is specifically engineered for LCI four-point automatic leveling systems with 9-inch jacks, as well as various Fifth Wheels, Travel Trailers, Class A, and Class C Motorhomes. Made from durable, recycled rubber, these pads offer enhanced stability, vibration dampening, and protection against environmental elements.
Image 1: SnapPad Xtra Round 9 (6-Pack) Leveling Pads.
2. Product Overview
Key Features:
- Six-Point RV Leveling System: Compatible with various RV types including Fifth Wheels, Travel Trailers, Class A, and Class C Motorhomes. Designed for LCI four-point automatic leveling systems with 9-inch jacks.
- Permanent Attachment: Designed for quick installation and permanent attachment, eliminating the need to manually place and retrieve pads.
- Enhanced Stability: Increases stability through a larger footprint, improved vibration dampening, and conformity to uneven terrain.
- Rugged & Durable Material: Made in the USA from recycled tire crumb, high-strength resin, and a 100+ ton press, ensuring extreme durability and grip on any terrain.
- Comprehensive Protection: Engineered to resist UV exposure, water, heat, oil, tar, mud, and other environmental hazards, protecting metal landing feet from damage.
Compatibility:
SnapPad Xtra Round 9 pads are compatible with LCI Level Up, LCI Ground Control 3.0, LCI Ground Control TT, and Rieco Titan Speedy leveling systems. They are suitable for a wide range of RV brands including Alliance RV, Coachmen, Crossroads, Cruiser RV, DRV, Dutchmen, East to West RV, Evergreen, Eclipse, Forest River, Genesis Supreme, Grand Design, Heartland, Highland Ridge, Jayco, Keystone, KZ, Northwood, Outdoors RV, Prime Time, Shasta, Vanleigh, and Winnebago.
Image 2: SnapPad Xtra Compatibility Chart.
Image 3: Compatible RV Types for SnapPad Xtra.
3. Setup and Installation
Before Installation:
Always double-check your RV leveling system and jack feet before ordering and installing SnapPads to ensure proper fitment. Ensure the jack feet are clean and free of debris.
Installation Steps:
- Position the SnapPad directly underneath the metal jack foot of your RV's leveling system.
- Lower the jack foot onto the SnapPad. The pad is designed to "snap" securely onto the metal foot.
- Apply downward pressure from the RV's weight to fully seat the SnapPad onto the jack foot. A small amount of dish soap can be applied to the inner lip of the SnapPad to aid in installation if needed.
- Verify that the SnapPad is evenly and securely attached around the entire perimeter of the jack foot.
- Repeat this process for all remaining jack feet. Once installed, SnapPads are designed to remain permanently attached.
Image 4: SnapPad Xtra installed on an RV jack foot.
4. Operation
With SnapPads permanently installed, operating your RV's leveling system becomes more convenient. Simply deploy your leveling jacks as usual. The attached SnapPads will automatically provide a larger, non-slip base, enhancing stability and reducing movement within the RV. The durable rubber material grips various terrains, including snow, grass, rock, and mud, preventing jacks from sinking or slipping.
Image 5: SnapPad Xtra gripping various terrains.
Video 1: OULEME RV Leveling Block Flex Pads, Rubber Jack Pads. This video demonstrates the flexibility and shock-absorbing properties of similar rubber leveling pads, showcasing their utility on various surfaces.
5. Care and Maintenance
SnapPad Xtra pads are designed for minimal maintenance. Their robust rubber construction is resistant to UV exposure, water, heat, oil, tar, and mud. Regular cleaning with water and mild soap is sufficient to remove accumulated dirt and debris. Inspect pads periodically for any signs of wear or damage, though they are built for long-term durability.
6. Troubleshooting
Pads Not Attaching Securely:
- Ensure the jack foot is clean and free of any obstructions.
- Apply a small amount of dish soap to the inner lip of the SnapPad to reduce friction during attachment.
- Ensure sufficient downward pressure from the RV's weight is applied to fully seat the pad.
Pads Appearing Loose After Installation:
- Re-verify that the pad is centered and fully snapped onto the jack foot. The fit should be snug.
- While designed for permanent attachment, if concerns persist, ensure the installation was performed according to instructions, allowing the RV's weight to properly secure the pads.
7. Product Specifications
| Feature | Specification |
|---|---|
| Brand | SnapPad |
| Model | XTRA Round 9 (6-Pack) |
| Material | Recycled Rubber |
| Color | Black |
| Load Capacity | 9000 Pounds |
| Maximum Lifting Height | 9 Inches |
| Item Weight (per pad) | Approximately 5 lbs |
| Vehicle Service Type | RV, Motorhome |
| UPC | 874119000004 |
8. Warranty and Support
For specific warranty information or technical support regarding your SnapPad Xtra RV Leveling Pads, please refer to the official SnapPad website or contact their customer service directly. Ensure you retain your proof of purchase for any warranty claims.
