Bio Ionic 10X Styling Iron User Manual

1. Important Safety Information

Please read all instructions carefully before using the Bio Ionic 10X Styling Iron. Keep this manual for future reference.

• Water Hazard: Do not use this appliance near bathtubs, showers, basins, or other vessels containing water. If the appliance falls into water, unplug it immediately. Do not reach into the water.
• Electrical Safety: Always unplug the appliance immediately after use. Do not use an extension cord with this appliance.
• Heat Warning: The styling iron becomes extremely hot during use. Avoid direct contact with skin. Allow the appliance to cool completely before storing.
• Children: Keep out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
• Damage: Do not operate the appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
• Storage: Store the appliance in a dry place. Do not wrap the cord around the appliance.

2. Product Overview

The Bio Ionic 10X Styling Iron is designed for efficient and healthy hair styling, featuring advanced moisturizing heat technology and sonic vibrating plates.

2.1 Key Features

• Moisturizing Heat Technology: Infuses micro-hydration into the hair, sealing in moisture and smoothing the cuticle for a high-gloss finish.
• Sonic Vibrating Plates: Plates vibrate at 7,500 vibrations per minute, allowing the iron to glide through hair effortlessly, reducing pulling and snagging.
• Natural Volcanic Mineral: Bio Ionic's proprietary Volcanic Mineral Complex conditions hair, leaving it softer and shinier.
• Digital Temperature Control: Adjustable heat settings up to 450°F (230°C) for precise styling.
• Rounded Tip Design: Enables versatile styling, from sleek straight looks to soft waves and curls.
• Automatic Shut-off: Safety feature that turns off the iron after 1 hour of inactivity.
• 9-foot Swivel Cord: Provides flexibility and ease of use during styling.

2.2 Components

• Styling Plates: Ceramic plates infused with Volcanic Mineral Complex.
• Digital Display: Shows current temperature.
• Power Button: Turns the iron on/off and activates vibration.
• Temperature Control Buttons: '+' and '-' buttons to adjust heat.
• Swivel Cord: Prevents tangling during use.

3. Setup

1. Unpack: Carefully remove the styling iron from its packaging.
2. Inspect: Check the appliance for any signs of damage. Do not use if damaged.
3. Plug In: Insert the power cord into a suitable electrical outlet. Ensure the voltage matches the appliance's requirements.

4. Operating Instructions

For optimal results, ensure hair is clean, dry, and detangled before styling. Apply a heat protectant spray for added hair health.

4.1 Powering On and Setting Temperature

1. Turn On: Press and hold the Power button until the digital display illuminates.
2. Adjust Temperature: Use the '+' and '-' buttons to select your desired temperature. The display will show the temperature increasing or decreasing. The iron heats up rapidly.
3. Activate Vibration: Once the desired temperature is reached, press the Power button once more to activate the sonic vibrating plates. This feature helps the iron glide smoothly through hair.

4.2 Straightening Hair

1. Section Hair: Divide your hair into small, manageable sections (approximately 1-2 inches wide).
2. Position Iron: Clamp the styling iron near the roots of a section, ensuring hair is evenly distributed between the plates.
3. Glide Down: Gently glide the iron down the hair section from root to tip in one smooth, continuous motion. The vibrating plates will assist in this process.
4. Repeat: Repeat for all sections until desired straightness is achieved. For very thick or coarse hair, multiple passes may be necessary, but try to minimize passes to protect hair.

4.3 Curling Hair

1. Section Hair: Divide your hair into small, manageable sections.
2. Position Iron: Clamp the styling iron near the roots of a section.
3. Rotate and Glide: Rotate the iron 180 degrees away from your face, then slowly glide it down the hair section to the ends. The rounded edges of the iron will help create a smooth curl.
4. Release: Release the iron and allow the curl to cool before touching or brushing.
5. Repeat: Repeat for all sections. For softer waves, gently brush through the curls once cooled.

5. Maintenance

Proper maintenance ensures the longevity and performance of your Bio Ionic 10X Styling Iron.

• Cleaning: Ensure the iron is unplugged and completely cool before cleaning. Wipe the plates and exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the iron in a safe, dry place when not in use. Do not wrap the power cord tightly around the appliance, as this can damage the cord. Use the provided cord strap for neat storage.
• Avoid Drops: Protect the iron from drops and impacts, which can damage the ceramic plates and internal components.

6. Troubleshooting

For issues not listed above, please contact Bio Ionic Customer Support.

7. Specifications

• Model: Z-LXT-10X-220V
• Plate Material: Ceramic with Natural Volcanic Mineral Complex
• Plate Width: 1 inch
• Max Temperature: 450°F (230°C)
• Auto Shut-off: 1 hour
• Cord Length: 9 feet (swivel)
• Dimensions: 15 x 3 x 5 inches
• Weight: 14.4 ounces
• UPC: 736658560886
• Manufacturer: BIO IONIC

8. Warranty and Support

For warranty information, product registration, or technical support, please visit the official BIO IONIC website or contact their customer service department.

Official Website: www.bioionic.com

Please retain your proof of purchase for any warranty claims.