Introduction
This manual provides comprehensive instructions for the safe and proper installation and use of your One For All WM4621 Tilt TV Wall Mount. This bracket is designed for LED, LCD, and Plasma TVs ranging from 32 to 90 inches, supporting a maximum weight of 100 kg. It features a 15-degree tilt capability to optimize viewing angles and reduce glare. Please read this manual thoroughly before beginning installation.
Image: The One For All WM4621 Tilt TV Wall Mount, showing its sturdy black metal construction and adjustable arms.
Safety Information
Always ensure safety during installation and use. Failure to follow these instructions could result in property damage or personal injury.
- Weight Capacity: Do not exceed the maximum weight capacity of 100 kg.
- Screen Size: Ensure your TV's screen size is within the recommended range of 32 to 90 inches.
- VESA Compatibility: Verify your TV's VESA mounting pattern matches the bracket's supported VESA sizes (100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400).
- Wall Type: This mount is designed for solid walls (concrete, brick) or wood stud walls. Consult a professional if unsure about your wall type.
- Tools: Use appropriate tools for installation. A drill, spirit level, and screwdriver are typically required.
- Assistance: It is highly recommended to have at least two people for installation, especially when lifting the TV.
- Cable Management: Ensure all cables are routed safely and do not interfere with the mount's movement or pose a tripping hazard.
Package Contents
Please check that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.
- TV Wall Mount Bracket (Main Frame)
- TV Mounting Arms (2 pieces)
- Assorted Screws for TV attachment (various sizes)
- Concrete Anchors
- Spacers
- Washers
- Spirit Level (for installation assistance)
Image: Example of mounting screws and washers included with the bracket.
Setup and Installation
The One For All WM4621 TV bracket is designed for straightforward installation. Follow these steps carefully to ensure a secure and stable mount for your television.
Step 1: Prepare the Wall
- Determine the desired height for your TV. Mark the center point on the wall where the bracket will be mounted.
- Use the provided template or the bracket itself to mark the drilling points on the wall. Ensure the marks are level using a spirit level.
- Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the anchors used.
Image: A spirit level, essential for ensuring the wall mount is perfectly horizontal.
Step 2: Attach the Wall Plate
- Insert the appropriate wall anchors into the drilled holes.
- Align the wall plate of the bracket with the anchors and secure it to the wall using the provided screws and washers. Tighten all screws firmly.
Step 3: Attach Arms to TV
- Locate the VESA mounting holes on the back of your TV.
- Attach the two vertical mounting arms to the back of your TV using the correct screws and spacers from the provided hardware kit. Ensure the arms are securely fastened and evenly spaced.
Image: Diagram illustrating various VESA mounting patterns supported by the bracket, ranging from 100x100 to 600x400 mm.
Image: Icon indicating the maximum weight capacity of 100 kg for the TV bracket.
Step 4: Mount the TV
- With assistance, carefully lift the TV and hook the mounting arms onto the wall plate. Ensure the TV is securely seated on the bracket.
- Engage any safety locks or screws on the mounting arms to prevent accidental dislodgement.
Installation Video Guide
For a visual guide on the installation process, please refer to the official One For All installation video below:
Video: Official One For All TV Bracket installation guide. This video demonstrates the steps for mounting the TV bracket to the wall and attaching the TV, including drilling, securing the wall plate, and hanging the television.
Operating the Tilt Feature
This TV bracket allows for a 15-degree tilt adjustment to achieve the optimal viewing angle and reduce screen glare.
- To adjust the tilt, gently push or pull the bottom of the TV forward or backward.
- The bracket is designed to hold the TV securely at the desired tilt angle.
- Avoid excessive force when adjusting the tilt.
Maintenance
Regular maintenance ensures the longevity and safety of your TV wall mount.
- Cleaning: Wipe the bracket with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Periodic Checks: Periodically check all screws and fasteners to ensure they remain tight. Over time, vibrations or minor shifts can loosen connections.
- Inspect for Damage: Regularly inspect the bracket for any signs of wear, corrosion, or damage. If damage is found, do not use the mount and contact customer support.
Troubleshooting
If you encounter issues during or after installation, refer to these common solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level after installation. | Wall plate or mounting arms are not perfectly level. | Carefully re-check the wall plate and mounting arms with a spirit level. Adjust as necessary by slightly loosening and re-tightening screws. Ensure the wall plate is level before attaching the TV. |
| Bracket feels loose on the wall. | Screws are not fully tightened or incorrect anchors were used. | Ensure all wall mounting screws are securely tightened. Verify that the correct type and size of anchors were used for your specific wall material. If necessary, consult a professional. |
| TV does not fit the bracket. | Incorrect VESA size or TV weight/size exceeds limits. | Double-check your TV's VESA pattern against the bracket's specifications. Confirm your TV's weight and screen size are within the stated limits (Max 100kg, 32-90 inch). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | WM4621 |
| Screen Size Compatibility | 32 - 90 Inches |
| Maximum Weight Capacity | 100 kg |
| VESA Compatibility | 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400 |
| Movement Type | Tilt (up to 15 degrees) |
| Material | Metal |
| Color | Black |
| Product Dimensions | 67.9 x 2.5 x 43.5 cm |
| Item Weight | 1.4 kg |
Warranty and Support
Your One For All TV Bracket WM4621 comes with a 12-month warranty supplied by Chigwell Satellite. For warranty claims or technical support, please contact the seller or refer to the official One For All website.
Additionally, you can utilize the One For All Toolbox app for further assistance and resources related to your product.