Xprite G3 Diamond Series Clear Lens LED Tail Lights Assembly for Jeep Wrangler JK JKU (2007-2018)

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Xprite G3 Diamond Series Clear Lens LED Tail Lights Assembly. Designed for 2007-2018 Jeep Wrangler JK and JKU models, these LED tail lights enhance vehicle visibility and safety with their advanced design and durable construction.

Figure 1: Xprite G3 Diamond Series Clear Lens LED Tail Lights installed on a Jeep Wrangler, showcasing their design and illumination.

Key Features

• Enhanced Visibility & Safety: Features turn signal and backup functions with faster on/off response times.
• Super Bright LED Chips: High brightness and endurance compared to factory bulbs, ensuring over 50,000 hours of lifespan.
• Durable Construction: Made with durable black ABS housing and clear PMMA lens, offering IP67 waterproof and shock-proof performance. DOT Approved.
• Plug & Play Installation: Designed for easy installation, typically completed in 15 minutes or less.
• Multiple Light Modes: Supports Red (Brake/Running), Red (Turn Signals), and White (Reverse Lights).

Figure 2: Detailed view of the Xprite LED Tail Light, emphasizing its brightness, longevity, and robust materials.

Setup and Installation

The Xprite G3 Diamond Series LED Tail Lights are designed for a straightforward plug-and-play installation on 2007-2018 Jeep Wrangler JK and JKU models. No complex wiring or modifications are typically required.

1. Prepare Your Vehicle: Ensure your vehicle is turned off and the parking brake is engaged.
2. Remove Factory Tail Lights:

   Locate the two screws on the inside edge of your factory tail light assembly. Use an appropriate screwdriver to remove these screws. Gently pull the tail light assembly away from the vehicle body.

   Video 1: Demonstrates the removal of existing tail lights and unplugging the wiring harness. This video shows the process of unscrewing the factory tail light and disconnecting the electrical connectors.

3. Disconnect Wiring: Carefully disconnect the electrical connectors from the back of the factory tail light. You may need to press a tab to release the connector.
4. Connect New Tail Lights:

   Take your new Xprite LED Tail Light. Connect the wiring harness from the vehicle to the corresponding connectors on the new LED tail light. Ensure a secure connection. If a load resistor is provided, follow its specific installation instructions, typically mounting it to a metal surface away from plastic components.

   

   Figure 3: Illustration of the plug-and-play wiring for the Xprite LED Tail Lights, showing the connectors and optional load resistors.
5. Mount New Tail Lights: Align the new LED tail light assembly with the mounting holes on your vehicle. Gently push it into place. Reinstall the two screws removed earlier to secure the new tail light. Do not overtighten.
6. Repeat for Other Side: Follow the same steps for the other tail light.
7. Test Functionality: Once both tail lights are installed, turn on your vehicle and test all light functions: running lights, brake lights, turn signals (left and right), and reverse lights.

Operating Instructions

Your Xprite G3 Diamond Series LED Tail Lights operate automatically with your vehicle's existing lighting system. They feature distinct illumination patterns for various driving conditions:

• Running Lights: When your vehicle's headlights or parking lights are on, the red LEDs will illuminate at a lower intensity.
• Brake Lights: Pressing the brake pedal will cause the red LEDs to illuminate at a higher intensity for increased visibility.
• Turn Signals: Activating the left or right turn signal will cause the corresponding red LEDs to flash, indicating your intended turn.
• Reverse Lights: Shifting your vehicle into reverse will activate the bright white LEDs, providing clear illumination behind your vehicle.

Figure 4: Visual representation of the different lighting modes: Running Light, Brake Light/Turn Signal, and Reverse Light.

Video 2: An official Xprite video demonstrating the various functions of the LED Tail Lights, including running, brake, and turn signals.

Video 3: A demonstration of the 2007-2018 Jeep Wrangler JK/JKU LED Tail Light functions, showcasing their performance.

Maintenance

These LED tail lights are designed to be maintenance-free with a long lifespan. However, regular checks can ensure optimal performance:

• Cleaning: Clean the lens regularly with a soft cloth and mild soap solution to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens.
• Connection Check: Periodically inspect the wiring connections to ensure they remain secure and free from corrosion.
• Damage Inspection: Check the housing and lens for any signs of physical damage, such as cracks or impacts, which could compromise the waterproof seal.

Figure 5: The weatherproof design of the Xprite LED Tail Lights ensures durability in various environmental conditions.

Troubleshooting

If you encounter any issues with your Xprite LED Tail Lights, refer to the following common troubleshooting steps:

• Lights Not Working:
  • Check all wiring connections to ensure they are securely plugged in.
  • Verify that the vehicle's fuses related to the tail lights are intact.
  • Ensure the lights are correctly installed on the appropriate side (left/right).
• Flickering Lights:
  • Flickering can sometimes occur due to CANBUS system sensitivity in some vehicles. Ensure any provided load resistors are correctly installed and functioning.
  • Inspect wiring for loose connections or damage.

  Video 4: A short video demonstrating a tail light flickering issue when the gate is opened and closed, which may indicate a wiring or CANBUS related problem.

• Condensation Inside Lens:
  • Minor condensation can sometimes occur due to temperature changes and usually dissipates.
  • If excessive or persistent, check the seal around the light housing for any gaps or damage.

Specifications

Figure 6: Product specifications for the Xprite G3 Diamond Series LED Tail Lights.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product packaging or visit the official Xprite website. Keep your purchase receipt for warranty claims.

If you require further assistance with installation, troubleshooting, or product inquiries, please contact Xprite customer service directly.