1. Product Overview
The MAXX Cold X27F.11 Xr60C Thermostat is a genuine Original Equipment Manufacturer (OEM) replacement part designed for refrigeration equipment. This thermostat ensures precise temperature control and reliable operation within compatible systems. It is approved by the original equipment manufacturer and intended for its specified use.

Figure 1: Maxx Cold X27F.11 Xr60C Thermostat. The unit features a digital display, 'SET' button, snowflake/fan button, up/down arrow buttons, and a power button. Wiring connections are visible at the top rear.
1.1 Package Contents
- 1 x MAXX Cold X27F.11 Xr60C Thermostat Controller
2. Safety Information
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death. This device operates with electrical power and should only be installed and serviced by qualified personnel.
- Electrical Hazard: Disconnect all power to the equipment before installing or servicing the thermostat.
- Proper Use: This thermostat is intended only for its designed and specified use as an OEM replacement part for MAXX Cold refrigeration equipment.
- Installation: Ensure all wiring connections comply with local and national electrical codes.
- Environmental Conditions: Do not expose the thermostat to excessive moisture, extreme temperatures outside its operating range, or corrosive environments.
3. Installation
Installation of the MAXX Cold X27F.11 Xr60C Thermostat should be performed by a certified technician. Refer to the specific wiring diagrams and installation instructions provided with your refrigeration unit for precise connection details.
3.1 Mounting
- Ensure the power supply to the refrigeration unit is completely disconnected.
- Carefully remove the existing thermostat, noting all wiring connections.
- Mount the new MAXX Cold X27F.11 Xr60C Thermostat into the designated panel opening.
- Secure the thermostat using the appropriate fasteners or clips.
3.2 Wiring Connections
The thermostat features multiple terminals for power, sensors, and control outputs. Refer to the wiring diagram printed on the side of the thermostat unit and your refrigeration equipment's service manual for correct connections.
- Power Supply: Connect the main power supply wires to the designated terminals.
- Sensor Inputs: Connect temperature sensor probes to the appropriate sensor input terminals.
- Control Outputs: Connect wires for compressor, fan, and defrost heater control to their respective output terminals.
Note: Incorrect wiring can damage the thermostat or the refrigeration unit. Always double-check connections before restoring power.
4. Operating Instructions
The MAXX Cold X27F.11 Xr60C Thermostat is designed for intuitive operation. The front panel includes a digital display and several control buttons.
4.1 Basic Functions
- Power Button (⑂): Press to turn the unit ON or OFF.
- SET Button: Used to view or modify the setpoint temperature and access programming parameters.
- Up (▲) / Down (▼) Buttons: Used to adjust values or navigate through menu options.
- Defrost / Function Button (❄): Initiates a manual defrost cycle or activates other specific functions depending on the programming.
4.2 Setting the Temperature
- Press the SET button once. The current setpoint temperature will flash on the display.
- Use the ▲ (Up) or ▼ (Down) buttons to adjust the temperature to the desired value.
- Press the SET button again to confirm and save the new setpoint. The display will return to showing the actual temperature.
4.3 Manual Defrost
To initiate a manual defrost cycle, press and hold the ❄ (Defrost) button for approximately 3 seconds. The defrost indicator will illuminate, and the unit will enter a defrost cycle. The cycle will terminate automatically or can be stopped by pressing and holding the defrost button again.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your thermostat.
- Cleaning: Periodically wipe the front panel with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Annually inspect wiring connections for tightness and signs of wear or corrosion. Ensure the thermostat is securely mounted.
- Sensor Check: Verify that temperature sensors are clean and properly positioned for accurate readings.
Caution: Always disconnect power to the refrigeration unit before performing any maintenance.
6. Troubleshooting
This section provides solutions to common issues you may encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank | No power, loose wiring, faulty unit. | Check power supply. Verify wiring connections. If problem persists, consult a technician. |
| Incorrect temperature reading | Faulty sensor, sensor improperly placed, wiring issue. | Check sensor placement and wiring. Test sensor resistance if possible. Replace sensor if faulty. |
| Unit not cooling/heating | Setpoint incorrect, compressor/fan issue, wiring problem. | Verify setpoint. Check compressor/fan operation. Inspect control output wiring. |
| Error code displayed | Specific system fault. | Refer to the refrigeration unit's service manual for specific error code definitions and troubleshooting steps. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | MAXX Cold |
| Model Name | MXCDX27F.11 |
| Item Model Number | MXCDX27F.11 |
| Controller Type | HVAC thermostat |
| Color | Black |
| Special Features | Programmable, Low Battery Indicator, Low Voltage, Filter Indicator, Portable, Temperature Display, Lockable, Auto-Scheduling, Lightweight Design, Auto Changeover |
| Package Dimensions | 9.37 x 5.94 x 3.07 inches |
| Item Weight | 7.36 ounces |
| Manufacturer | MAXX COLD |
| ASIN | B01INLFTOE |
| Date First Available | July 18, 2016 |
8. Warranty and Support
As a genuine OEM replacement part, the MAXX Cold X27F.11 Xr60C Thermostat is subject to the manufacturer's standard warranty terms. For specific warranty details, technical support, or service inquiries, please contact MAXX Cold directly or refer to the documentation provided with your original refrigeration equipment.
You can find more information about MAXX Cold products by visiting the official MAXX Cold Store on Amazon.