AKG MINI2VOC-US25A/C

Download PDF
Contents

AKG Pro Audio Wireless Microphone System

User Manual

Product Overview

The AKG WMS40 Mini Dual Vocal Set (model MINI2VOC-US25A/C) is a plug-and-play wireless microphone solution designed for ease of use and reliable performance. This system includes two HT40 Mini handheld transmitters and an SR40 Mini Dual stationary receiver, providing a comprehensive setup for vocal applications.

AKG WMS40 Mini Dual Vocal Set showing receiver and two handheld microphones

Image: The complete AKG WMS40 Mini Dual Vocal Set, featuring the SR40 Mini Dual stationary receiver with two antennas and two HT40 Mini handheld wireless microphones.

Key Components

  • SR40 Mini Dual Wireless Stationary Receiver: This unit receives signals from both microphones and provides audio outputs.
  • HT40 Mini Wireless Handheld Transmitters (x2): Each microphone features a dynamic cardioid capsule for clear vocal pickup and operates on a single AA battery.
  • Universal Power Supply: Includes adapters for EU, UK, US, and AU outlets.
  • 1/4 inch Jack Cable: For connecting the receiver to an amplifier or mixer.

Setup Guide

  1. Unpack Components: Carefully remove all items from the packaging.
  2. Connect Power to Receiver: Connect the universal power supply to the SR40 Mini Dual receiver's power input and plug it into a suitable electrical outlet (127 Volts).
  3. Connect Receiver to Audio System: Use a 1/4 inch jack cable to connect the receiver's output to your amplifier, mixer, or speaker system. The receiver offers two balanced outputs.
  4. Install Batteries in Microphones: Each HT40 Mini handheld transmitter requires one AA battery. Unscrew the bottom part of the microphone to access the battery compartment. Insert the AA battery, ensuring correct polarity.
  5. Close-up of AKG HT40 Mini handheld microphone

    Image: A detailed view of the AKG HT40 Mini handheld microphone, showing the on/off/mute switch and battery compartment location.

  6. Position Antennas: Ensure the receiver's antennas are extended and positioned for optimal signal reception.

Operating Instructions

Powering On/Off

  • Receiver: Press the ON/OFF button on the SR40 Mini Dual receiver to power it on or off. The power indicator light will illuminate when on.
  • AKG SR40 Mini Dual stationary receiver

    Image: The AKG SR40 Mini Dual stationary receiver, highlighting the volume knobs, AF CLIP, RF OK indicators, and ON/OFF switch.

  • Microphones: Use the slide switch on each HT40 Mini handheld transmitter to turn it ON, OFF, or MUTE.

Volume Control

Each channel on the SR40 Mini Dual receiver has an independent volume knob. Adjust these knobs to control the output level of each microphone.

Indicator Lights

  • RF OK (Green): This indicator illuminates when the receiver is successfully receiving a radio frequency (RF) signal from the corresponding transmitter.
  • AF CLIP (Red): This indicator illuminates if the audio signal from the microphone is too strong, causing clipping or distortion. Reduce the microphone's input gain or the receiver's volume if this light frequently illuminates.

Maintenance

  • Battery Replacement: The HT40 Mini transmitters offer an extended battery life of up to 30 hours on a single AA battery. Replace batteries when the microphone's indicator light dims or performance degrades. Always use fresh alkaline AA batteries.
  • Cleaning: Use a soft, dry cloth to clean the exterior of the receiver and microphones. Do not use liquid cleaners or abrasive materials. For microphone grilles, a soft brush can be used to remove debris.
  • Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove batteries from the transmitters to prevent leakage.

Troubleshooting

ProblemPossible CauseSolution
No sound from microphoneMicrophone or receiver not powered on; low/dead battery; incorrect cable connection; receiver volume too low.Ensure both microphone and receiver are ON. Replace microphone battery. Check all cable connections. Increase receiver volume.
Distorted or clipped audio (AF CLIP light on)Microphone input signal too strong.Reduce the microphone's input gain (if adjustable) or lower the volume on the receiver. Ensure you are not speaking too loudly directly into the microphone.
Interference or dropoutsObstructions between transmitter and receiver; too far from receiver; other wireless devices operating on similar frequencies.Ensure clear line of sight between microphone and receiver. Reduce distance. Turn off other wireless devices that may cause interference.
Microphone indicator light dim/offLow or dead battery.Replace the AA battery in the HT40 Mini transmitter.

Technical Specifications

FeatureSpecification
Model NumberMINI2VOC-US25A/C
Item Weight3.13 pounds
Product Dimensions11.31 x 11.31 x 2.34 inches
Batteries Required1 AA battery (for each transmitter, included)
Battery TypeAlkaline
ColorBlack
Compatible DevicesAmplifier, Speaker, Headphone
Connector Type6.35 mm Jack
Speaker Count (Outputs)2
Power SourceCorded Electric
Voltage127 Volts
Special FeatureWireless
Recommended UsesKaraoke, Singing

Warranty and Support

AKG products are manufactured to high quality standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official AKG website.

For technical support, troubleshooting assistance, or service inquiries, please contact AKG customer support. You can find contact information and additional resources on the AKG Pro Audio Store on Amazon or the official AKG website.

© 2025 AKG. All rights reserved. Model: MINI2VOC-US25A/C

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.