Introduction
The Kichler Barrington 3-Light Vanity Light (Model 37418) is a lighting fixture designed for various indoor spaces, including bathrooms, bedrooms, and living areas. It features a distressed black finish combined with a wood-look accent and clear seeded glass shades. This fixture can be installed to direct light either upwards or downwards, offering versatility in design and illumination.
Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker before installation or servicing.
- Always turn off the main power supply at the circuit breaker or fuse box before beginning any electrical installation.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances.
- This fixture is ETL listed, indicating it meets minimum safety standards.
- Do not exceed the maximum wattage specified for the bulbs.
Package Contents
Verify that all components are present before beginning installation:
- 1 x Kichler Barrington 3-Light Vanity Light Fixture
- 3 x 60-watt A19 Vintage-Style Starter Bulbs
- Mounting Hardware (screws, wire nuts, mounting plate)
- Installation Instructions (this manual)
Setup and Installation
Tools Required:
- Phillips Head Screwdriver
- Flathead Screwdriver
- Wire Strippers
- Electrical Tape
- Safety Glasses
Pre-Installation:
- Turn off power at the main circuit breaker or fuse box.
- Carefully unpack the fixture and its components. Retain packaging until installation is complete.
- Review all instructions and diagrams before proceeding.
Mounting the Fixture:
- Attach the mounting plate to the electrical junction box using the provided screws. Ensure the plate is securely fastened.
- Determine desired lighting direction (up-light or down-light). The fixture can be mounted in either orientation.
Figure 1: Angled view of the Kichler Barrington 3-Light Vanity Light.
Wiring Connections:
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut. If no ground wire is present, attach to the green ground screw on the mounting plate.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Carefully tuck all wires into the junction box.
Figure 2: Front view of the vanity light, showing the three light sockets and clear seeded glass shades.
Securing the Fixture and Installing Bulbs:
- Align the fixture with the mounting plate and secure it using the provided screws.
- Attach the clear seeded glass shades to each socket.
- Screw the provided 60-watt A19 vintage-style bulbs into the E26 Medium base sockets. Do not overtighten.
Figure 3: View of the fixture with shades oriented for down-lighting.
Figure 4: Side profile of the vanity light, highlighting the distressed black and wood-look finish.
- Restore power at the circuit breaker.
Operating Instructions
Basic Operation:
Once installed and power is restored, operate the light fixture using the standard wall switch connected to the circuit.
Dimming Feature:
This fixture is fully dimmable. To utilize the dimming function, ensure you have a compatible dimmer switch installed (sold separately) and use dimmable E26 Medium base bulbs.
Maintenance
Cleaning:
- Always turn off power to the fixture before cleaning.
- Wipe the fixture with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Clean glass shades with a mild glass cleaner and a soft cloth.
Bulb Replacement:
- Turn off power to the fixture at the circuit breaker.
- Allow bulbs to cool completely before touching.
- Carefully unscrew the old bulb from the socket.
- Screw in a new E26 Medium base A19 bulb. Ensure the replacement bulb does not exceed 60 watts.
- Restore power at the circuit breaker.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not illuminate | 1. Power is off. 2. Bulb is loose or faulty. 3. Incorrect wiring. | 1. Check circuit breaker and wall switch. 2. Tighten or replace bulb. 3. Verify wiring connections (consult electrician if needed). |
| Dimming function not working | 1. Non-dimmable bulbs used. 2. Incompatible dimmer switch. | 1. Replace with dimmable E26 A19 bulbs. 2. Ensure dimmer switch is compatible with LED/incandescent fixtures. |
Specifications
| Brand | Kichler |
| Model Number | 37418 |
| Number of Lights | 3 |
| Style | Traditional |
| Fixture Material | Mixed material (metal with wood-look finish) |
| Shade Material | Glass (Clear seeded) |
| Bulb Type | Standard A19 (included) |
| Bulb Base | Medium base (E-26) |
| Max Wattage per Bulb | 60 watts |
| Voltage | 120 Volts |
| Dimmable | Yes |
| Lighting Direction | Up/Down Light |
| Dimensions (L x W x H) | 5.7"L x 22"W x 9"H |
| Item Weight | 6.03 Pounds |
| Usage Rating | Damp rated |
| Safety Listing | ETL Listed |
Warranty
This Kichler product is covered by a 1-year manufacturer warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Support
For technical assistance, replacement parts, or customer service inquiries, please visit the official Kichler website or contact their customer support directly. You can find up-to-date contact information and FAQs on their website:
