Everbilt Electric Water Heater Installation Kit

1. Introduction

This manual provides detailed instructions for the proper installation, maintenance, and troubleshooting of the Everbilt Electric Water Heater Installation Kit. This kit is designed to facilitate the connection of a new or replacement electric water heater to your existing plumbing system. Please read all instructions carefully before beginning installation.

2. Product Overview

The Everbilt Electric Water Heater Installation Kit includes essential components for a secure and leak-free connection. The kit contains:

• Two (2) Lead-Free Stainless Steel Connectors
• Two (2) Lead-Free Brass Compression Adapters
• One (1) Roll of Yellow Sealing Tape

Figure 1: Everbilt Electric Water Heater Installation Kit, showing the complete package with stainless steel connectors, brass adapters, and sealing tape.

Figure 2: Detailed view of a stainless steel connector's end, featuring a brass fitting and sealing washer, designed for secure attachment.

Figure 3: Close-up of a lead-free brass compression adapter, showing its threaded and compression ends for connecting to various pipe types.

Figure 4: Magnified view of the braided stainless steel material used for the connectors, highlighting its durability and flexibility.

3. Installation Instructions

3.1 Safety Precautions

• Always turn off the electrical power to the water heater at the circuit breaker before beginning any work.
• Turn off the main water supply to the water heater.
• Drain the water heater completely before disconnecting any lines.
• Wear appropriate personal protective equipment, including safety glasses and gloves.
• Ensure proper ventilation if working in confined spaces.

3.2 Required Tools (Not Included)

• Adjustable Wrench or Pipe Wrench
• Bucket or Drain Pan
• Hose (for draining water heater)

3.3 Step-by-Step Installation

1. Prepare Water Heater: Ensure the water heater is completely drained and both power and water supplies are off. Remove old connectors if replacing.
2. Apply Sealing Tape: Wrap the yellow sealing tape (PTFE tape) clockwise around the male threads of the water heater's inlet and outlet ports (typically 3-5 wraps). This helps create a watertight seal.
3. Connect Brass Adapters: Thread the lead-free brass compression adapters onto the water heater's inlet and outlet ports. Hand-tighten, then use a wrench to tighten an additional 1/2 to 1 full turn. Do not overtighten.
4. Connect Stainless Steel Hoses: Attach one end of each stainless steel connector to the brass adapters on the water heater. Attach the other end of each connector to your home's hot and cold water supply lines. Ensure the hot water line connects to the hot water outlet and the cold water line connects to the cold water inlet.
5. Tighten Connections: Hand-tighten all connections, then use a wrench to tighten securely. Avoid overtightening, which can damage threads or washers.
6. Restore Water and Power: Slowly turn on the main water supply to the water heater. Open a hot water faucet in your home to allow air to escape the system. Once water flows steadily from the faucet, close it. Check all connections for leaks. If no leaks are present, restore electrical power to the water heater.

4. Operation

This Everbilt kit provides the necessary connections for your electric water heater. The kit itself does not have operational controls. For instructions on operating your electric water heater, including temperature settings and safety features, please refer to the specific instruction manual provided by your water heater manufacturer.

5. Maintenance

Regular inspection of your water heater connections can help prevent issues:

• Leak Checks: Periodically inspect all connections for any signs of water leaks. Address any leaks immediately by tightening connections or reapplying sealing tape if necessary.
• Corrosion: Check for any signs of corrosion on the connectors or adapters. While the components are designed for durability, harsh water conditions can sometimes lead to wear.
• Flexibility: Ensure the stainless steel connectors remain flexible and are not kinked or stressed.

6. Troubleshooting

If you encounter issues after installation, consider the following:

• Leaks at Connections:
  • Ensure all connections are tightened properly.
  • Verify that enough sealing tape was applied to the threads. If not, turn off water, drain, disconnect, reapply tape, and reconnect.
  • Check for damaged washers within the connector fittings.
• No Water Flow:
  • Confirm that the main water supply valve to the water heater is fully open.
  • Ensure no air is trapped in the lines by opening a hot water faucet until water flows consistently.

7. Product Specifications

8. Warranty and Support

For specific warranty information, technical assistance, or customer support regarding your Everbilt Electric Water Heater Installation Kit, please refer to the official Everbilt website or contact their customer service department directly. Keep your purchase receipt for warranty claims.