Dyson V8 Absolute Cordless Stick Vacuum Cleaner Instruction Manual

Introduction

The Dyson V8 Absolute cordless stick vacuum cleaner is engineered for powerful and versatile cleaning. Featuring the Dyson digital motor V8, it delivers strong suction for various tasks. This model includes two specialized cleaner heads: a direct-drive cleaner head for carpets and a soft roller cleaner head for hard floors, allowing for simultaneous removal of large debris and fine dust. The whole-machine HEPA filtration system captures allergens, expelling cleaner air. With up to 40 minutes of fade-free suction, the trigger mechanism ensures battery power is only used during active cleaning.

Safety Information

• Battery Temperature: The machine will switch off if the battery temperature is below 37.4°F (3°C) to protect the motor and battery. Do not charge the machine and then move it to an area with a temperature below 37.4°F (3°C) for storage purposes.
• Recharging: To prolong battery life, avoid recharging immediately after a full discharge. Allow the battery to cool for a few minutes before recharging.
• Battery Use: Avoid using the machine with the battery flush to a surface. This practice helps the battery run cooler and can extend its run time and overall life.
• Clogs: If the vacuum enters an "on-off" mode (sucks, stops, starts sucking again), it may indicate a clog or blockage. Inspect the machine for obstructions.

What's in the Box

Your Dyson V8 Absolute package includes the following components:

• Dyson V8 Absolute Vacuum (Main Unit)
• Extension Wand
• Direct-Drive Cleaner Head (for carpets)
• Soft Roller Cleaner Head (for hard floors)
• Docking Station
• Combination Tool
• Crevice Tool
• Mini Soft Dusting Brush
• Mini Motorized Tool
• Charger

Setup

Assembly

Assemble the main vacuum unit by connecting the extension wand and your preferred cleaner head. All connections feature a quick-release mechanism for easy attachment and detachment.

Figure 1: Fully assembled Dyson V8 Absolute cordless vacuum cleaner.

Initial Charging

Before first use, fully charge the vacuum. The charging block connects to the main unit. A blue indicator light will show the charging status. For optimal battery life, ensure the unit is fully charged before its initial operation.

Figure 2: Dyson V8 Absolute mounted on its docking station for charging.

Wall Mount Installation

The included docking station can be mounted to a wall for convenient storage and charging. Ensure it is installed in a location with easy access to a power outlet. The docking station also provides storage for additional tools.

Video 1: Demonstrates the assembly process of the Dyson V8 vacuum, including attaching the wand and cleaner head, and installing the wall mount.

Operating Instructions

Power Modes

The Dyson V8 Absolute features two power modes: standard and Max power mode. The trigger releases instantly, ensuring battery power is conserved and only used for cleaning. Max power mode provides 7 minutes of higher suction for more difficult tasks.

Using Cleaner Heads

• Direct-Drive Cleaner Head: This head drives bristles deeper into carpets to remove ground-in dirt and debris.


Figure 3: Direct-drive cleaner head effectively removing dirt from carpet.

• Soft Roller Cleaner Head: Invented for hard floors, this head removes large debris and fine dust simultaneously without scratching delicate surfaces.


Figure 4: Soft roller cleaner head picking up debris from a hard floor surface.

Versatile Cleaning with Tools

The Dyson V8 Absolute quickly converts to a handheld vacuum for quick clean-ups, spot cleaning, and reaching difficult places. Utilize the various tools for specific tasks:

• Mini Motorized Tool: Ideal for tough tasks, stiff nylon bristles remove pet hair and ground-in dirt from furniture, car seats, and tight spaces.


Figure 5: Using the mini motorized tool in handheld mode to clean a sofa.

• Crevice Tool: For precise cleaning around edges and narrow gaps.
• Mini Soft Dusting Brush: For gentle dusting around the home, on delicate surfaces, or electronics.
• Combination Tool: A two-in-one tool with a wide nozzle and brush for switching between cleaning and dusting tasks.

Figure 6: The lightweight design allows for easy cleaning of high-up areas.

Maintenance

Emptying the Dustbin

The hygienic dirt ejector empties dust from the bin in a single action. Position the vacuum over a trash receptacle, then push the red lever to release the bin's contents. Close the bin until it clicks securely.

Video 2: Official Dyson video demonstrating the hygienic dirt ejector for emptying the dustbin.

Cleaning the Filters

The whole-machine HEPA filtration system requires periodic cleaning to maintain optimal performance. The filter can be easily removed by twisting it off. Rinse the filter under cold water until the water runs clear, then allow it to air dry completely for at least 24 hours before reinserting it into the vacuum.

Figure 7: The washable HEPA filter, shown removed from the main unit for cleaning.

Troubleshooting

• Vacuum Stops Operating: If the machine switches off, check the battery temperature. It is designed to stop if the temperature is below 37.4°F (3°C) to protect components. Allow it to warm up if necessary.
• Reduced Suction or Intermittent Operation: This can indicate a clog. Inspect the cleaner head, wand, and dustbin for any blockages. Clear any obstructions to restore full suction.
• Short Battery Run Time: Ensure the battery is fully charged. Avoid continuous use in Max power mode, as this significantly reduces run time. Allow the battery to cool down after a full discharge before recharging.

Specifications

Warranty and Support

The Dyson V8 Absolute comes with a 2-year warranty covering parts and labor. For support, please refer to the official Dyson website or contact their customer service.