Introduction
This manual provides essential information for the assembly, use, and maintenance of your Walker Edison Mid Century Modern Wood Dining Table. Please read these instructions carefully before assembly and retain for future reference.
Image: The Walker Edison Mid Century Modern Wood Dining Table, featuring a white tabletop and natural wood angled legs, set in a dining area.
Safety Information
To ensure safe use of your dining table, please observe the following guidelines:
- Do not exceed the maximum weight recommendation of 100 lbs.
- Always follow the assembly instructions carefully to ensure the stability and safety of the table.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Avoid placing hot items directly on the tabletop without protective mats.
- Do not stand or sit on the table.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. The package should include:
- Dining Table Top
- Table Legs (4 units)
- Assembly Guide
- Hardware Packet (screws, washers, etc.)
Setup and Assembly Instructions
Assembly of this dining table is designed to be straightforward, typically requiring two simple steps. It is recommended that two people perform the assembly.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the included Assembly Guide to identify each part and ensure all hardware is present.
- Attach Legs to Tabletop: Position the tabletop upside down on your protected surface. Align each table leg with the pre-drilled holes on the underside of the tabletop. Secure the legs using the provided hardware (screws, washers) and the recommended tools (screwdriver, wrench). Ensure all connections are tightened securely but do not overtighten.
- Upright the Table: With assistance, carefully turn the table upright and place it in its desired location.
For detailed, step-by-step visual instructions, please consult the dedicated Assembly Guide included in your package.
Image: A diagram illustrating the dimensions of the dining table: 30 inches high, 60 inches long, and 35 inches wide.
Image: A close-up shot detailing the connection point between the natural wood leg and the white tabletop, highlighting the construction.
Operating Instructions (Usage)
Your Walker Edison dining table is designed for indoor residential use. It comfortably seats up to 6 people.
- Use the table for dining, work, or other household activities.
- Ensure the table is placed on a level surface to prevent wobbling.
- Distribute weight evenly across the tabletop.
Video: An official product video from Walker Edison showcasing the Mid-Century Modern Dining Room Table, 60 Inch, highlighting its design and suitability for various dining settings.
Maintenance
Proper care will extend the life and appearance of your dining table:
- Cleaning: Wipe with a dry cloth. For spills, use a slightly damp cloth immediately and dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Protection: Use coasters under drinks and placemats under dishes to protect the tabletop from heat, moisture, and scratches.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the wood and tabletop finish.
Image: A straight-on front view of the dining table, showcasing its rectangular white top and natural wood legs.
Image: A detailed close-up of the tabletop's edge, showing its smooth, rounded finish and white color.
Specifications
| Feature | Detail |
|---|---|
| Brand | Walker Edison |
| Model Number | TW60RMWNL |
| Product Dimensions (D x W x H) | 35.37" x 59" x 29.37" |
| Item Weight | 20 Kilograms |
| Maximum Weight Recommendation | 100 Pounds |
| Frame Material | Wood (Solid + Manufactured Wood) |
| Top Material Type | Wood (Engineered Wood) |
| Color | White/Natural |
| Seating Capacity | 6 people |
| Required Assembly | Yes |
| Tools Recommended For Assembly | Screw Driver, Wrench |
| Indoor Outdoor Usage | Indoor |
Warranty and Support
This Walker Edison dining table comes with a Limited Warranty. For specific details regarding warranty coverage, please refer to the documentation included with your purchase.
Should you have any questions, require replacement parts, or need assistance, please contact Walker Edison customer support:
- Phone: 1-801-433-3008
- Email: service@walkeredison.com
Replacement parts are available. Please contact Walker Edison within 30 days of delivery for any part-related inquiries.
Image: Contact details for Walker Edison customer support, including phone number and email address.
