Introduction
This manual provides essential information for the installation, operation, and maintenance of your Focal PS-165X2 6.5" Car Audio Component Speakers System. The PS-165X2 system is designed to deliver high-fidelity sound in your vehicle, featuring a 2-way component design with Polyglass cones and aluminum inverted dome tweeters. Please read these instructions carefully before proceeding with installation and use to ensure optimal performance and longevity of your speakers.
What's in the Box
Your Focal PS-165X2 system includes the following components:
- Two 6.5" Component Woofers
- Two Tweeters
- Two Passive Crossovers
- Two Woofer Grills
- Tweeter Mounting Hardware (e.g., flush mount, angle mount cups)
- Mounting Screws and Clips
- User Manual (this document)
Image: A Focal 6.5-inch component speaker (woofer) with its protective grill, showcasing the Polyglass cone and overall design.
Image: Two Focal PS-165X2 passive crossovers, showing input and output terminals for woofers and tweeters.
Setup and Installation
Proper installation is crucial for the performance and safety of your car audio system. It is highly recommended that installation be performed by a qualified professional car audio installer. If you choose to install the system yourself, please follow these general guidelines:
- Safety First: Disconnect the vehicle's battery before starting any electrical work to prevent short circuits and damage.
- Mounting Location:
- Woofers: Install the 6.5-inch woofers in factory speaker locations or custom enclosures designed for this size. Ensure adequate clearance behind the speaker for proper excursion and magnet depth.
- Tweeters: Choose a location for the tweeters that provides optimal sound staging, typically on the dashboard, A-pillars, or door panels. Utilize the provided mounting cups for flush or angled installation as desired.
- Crossovers: Mount the passive crossovers in a dry, secure location, away from heat sources and moisture. Ensure easy access for wiring connections.
- Wiring:
- Connect the output of your amplifier to the input terminals of the passive crossovers.
- Connect the woofer output terminals of the crossover to the respective woofers.
- Connect the tweeter output terminals of the crossover to the respective tweeters.
- Ensure correct polarity (+ to + and - to -) for all connections. Incorrect polarity will result in poor sound quality.
- Use appropriate gauge speaker wire for all connections to minimize power loss and ensure optimal performance.
- Secure Mounting: Ensure all speakers and crossovers are securely mounted to prevent vibrations and potential damage.
Image: Rear view of two Focal PS-165X2 woofers, showing the magnet structure and terminals for wiring connections.
Image: Two Focal PS-165X2 tweeters, featuring the aluminum inverted dome design.
Image: Two black tweeter mounting cups, used for flush or angled installation of the tweeters.
Operating Instructions
Once properly installed, your Focal PS-165X2 component speakers will operate as part of your car's audio system. These are passive speakers and do not require direct user control beyond the settings on your head unit or amplifier.
- Power On: Turn on your car's head unit and amplifier.
- Volume Control: Adjust the volume through your head unit. Avoid excessively high volumes that cause distortion, as this can damage the speakers.
- Audio Settings: Use your head unit or amplifier's equalizer and sound processing features to fine-tune the audio output to your preference. The PS-165X2 speakers are designed for a balanced and accurate sound reproduction.
- Break-in Period: Allow a break-in period of approximately 20-30 hours of normal listening before evaluating the full sound potential of your speakers. During this time, the speaker components will loosen up and achieve their optimal performance characteristics.
Maintenance
To ensure the longevity and optimal performance of your Focal PS-165X2 speakers, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the speaker grills and surrounds with a soft, dry cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the speaker materials.
- Moisture: Keep the speakers dry. While designed for automotive environments, direct exposure to excessive moisture or liquids should be avoided.
- Temperature Extremes: Avoid prolonged exposure to extreme temperatures, both hot and cold, as this can affect speaker performance and material integrity over time.
- Physical Damage: Protect the speaker cones and tweeters from physical impact or punctures. The grills are provided for this purpose.
Image: Two black speaker grills with the Focal logo, designed to protect the woofers.
Troubleshooting
If you experience issues with your Focal PS-165X2 speakers, consult the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers |
|
|
| Distorted or unclear sound |
|
|
| One speaker not working |
|
|
If these steps do not resolve the issue, please contact Focal customer support or your authorized dealer for further assistance.
Specifications
Key technical specifications for the Focal PS-165X2 Car Audio Component Speakers System:
| Feature | Specification |
|---|---|
| Speaker Type | 2-Way Component System |
| Woofer Diameter | 6.5 inches (165 mm) |
| Tweeter Diameter | 1 inch (25 mm) |
| Woofer Cone Material | Polyglass |
| Tweeter Type | Aluminum Inverted Dome |
| RMS Power Handling | 80 Watts |
| Peak Power Handling | 160 Watts |
| Impedance | 2 Ohms |
| Sensitivity (2.83V/1m) | 92.5 dB |
| Frequency Response | 60 Hz - 20 kHz |
| Included Components | Woofers, Tweeters, Crossovers, Grills |
| Mounting Type | Car Mount |
| Material | Aluminum (tweeter), Polyglass (woofer cone) |
| Item Weight | 9 Pounds (total system) |
Warranty and Support
Warranty: The Focal PS-165X2 speakers come with a Limited Warranty. Please refer to the warranty card included with your product or visit the official Focal website for specific terms and conditions, including duration and coverage details. Keep your proof of purchase for warranty claims.
Customer Support: For technical assistance, installation questions, or warranty service, please contact your authorized Focal dealer or visit the official Focal website for contact information and support resources. You can also visit the Focal Store on Amazon for additional product information.
