LightInTheBox Modern LED Pendant Light 3-Ring Chandelier Instruction Manual

Introduction

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your LightInTheBox Modern LED Pendant Light 3-Ring Chandelier. Please read this manual thoroughly before installation and retain it for future reference.

Safety Information

WARNING: To reduce the risk of electric shock, fire, or injury to persons, read and follow all instructions carefully.

• Always disconnect power at the main circuit breaker before installation or maintenance.
• Installation must be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
• Ensure the mounting surface can support the weight of the fixture.
• Do not connect the fixture to an ungrounded electrical system.
• Do not attempt to modify the fixture.
• Keep flammable materials away from the light fixture.

Package Contents

Verify that all components are present and undamaged before beginning installation.

• LED Pendant Light Fixture (3 Rings)
• Ceiling Canopy
• Mounting Hardware (screws, wire nuts, mounting bracket)
• Remote Control (batteries not included)
• Instruction Manual

Specifications

Setup and Installation

Follow these steps for proper installation. It is recommended to have two people for installation.

1. Prepare for Installation

• Turn off power: Ensure the power supply to the installation area is completely off at the circuit breaker.
• Unpack: Carefully remove all components from the packaging. Inspect for any damage.
• Identify components: Familiarize yourself with the fixture, ceiling canopy, mounting bracket, and wires.

2. Mount the Fixture

1. Attach the mounting bracket to your ceiling junction box using the provided screws. Ensure the junction box can support the fixture's weight (approximately 6.6 lbs / 3 kg).
2. Connect the electrical wires:
   • Connect the black wire from the fixture to the brown (hot) wire from the ceiling.
   • Connect the white wire from the fixture to the blue (neutral) wire from the ceiling.
   • Connect the copper (ground) wire from the fixture to the green (ground) wire from the ceiling.
   • Secure connections with wire nuts.
3. Carefully tuck the wires into the junction box.
4. Attach the ceiling canopy to the mounting bracket, securing it with the provided screws.

Figure 1: Assembled 3-Ring Chandelier

3. Adjusting Ring Height and Orientation

The three rings of the chandelier are suspended by adjustable cords, allowing for customization of their height and angle. This adjustment should ideally be done before the final mounting of the canopy to the ceiling.

1. To adjust the length of each suspension wire, locate the small circular lip or button on the inside of the ceiling canopy where each wire is connected.
2. Press and hold this button while simultaneously pushing or pulling the wire to your desired length. Release the button to lock the wire in place.
3. Adjust each ring individually to achieve your preferred aesthetic. The rings can be positioned to overlap or spread out.
4. Excess wire can be coiled and secured within the ceiling canopy.

Figure 2: Adjustable Cord Mechanism and Ring Dimensions

Figure 3: Detail of Suspension Wire Adjustment Point

Operating Instructions

Your LightInTheBox LED Pendant Light is controlled via the included remote control.

Remote Control Functions

• Power On/Off: Press the power button to turn the light on or off.
• Brightness Adjustment: Use the brightness buttons (usually marked with '+' and '-') to increase or decrease the light intensity.
• Color Temperature Adjustment: If your model supports it, use the dedicated buttons to switch between different color temperatures (e.g., warm white, cool white). This model provides Warm White (3000K).
• Memory Function: When turned off using the remote control, the fixture will typically remember the last brightness and color temperature settings. If turned off via a wall switch, it may default to maximum power with alternating warm or cool white settings.
• Timer Function: Some remotes may include a timer function. Refer to the remote's specific markings for details.

Figure 4: Remote Control for Chandelier Functions

Note: The remote control requires 2 AAA batteries (not included).

Maintenance

• Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
• LED Lifespan: The integrated LED light source is designed for long-term use and is not user-replaceable.

Troubleshooting

Warranty and Support

For warranty information or technical support, please contact LightInTheBox customer service. Retain your purchase receipt for warranty claims.

For further assistance, please visit the LightInTheBox Store on Amazon.