Introduction
This manual provides detailed instructions for the safe and effective use of your iTek Action Pro 720P Ultra HD Sports Camera, model qtmdpx-056. Please read this manual thoroughly before operating the device to ensure optimal performance and to prevent damage. Keep this manual for future reference.
Package Contents
Verify that all items listed below are present in your product packaging:
- Camera Body
- Waterproof Case (as shown in product image)
- USB Cable
- User Manual (this document)
Product Overview
Figure 1: Front view of the iTek Action Pro 720P Ultra HD Sports Camera enclosed in its clear waterproof housing. The camera features a prominent lens on the front, with control buttons visible on the top and side of the housing. A mounting bracket is attached to the bottom.
The iTek Action Pro is a compact sports camera designed for capturing high-definition video and photos in various environments. It comes equipped with a durable waterproof case, making it suitable for outdoor and aquatic activities. Key features include a wide-angle lens, intuitive controls, and a 720P Ultra HD recording capability.
Key Components:
- Lens: Captures video and still images.
- Power/Mode Button: Located on the front/top. Used to power on/off and switch between modes.
- Shutter/Record Button: Located on the top. Used to start/stop recording or take photos.
- Navigation Buttons: Typically on the side or front for menu navigation.
- Micro SD Card Slot: For storage of recordings.
- USB Port: For charging and data transfer.
- Waterproof Case: Provides protection against water, dust, and impacts.
Setup
- Charge the Battery: Before first use, fully charge the camera's internal battery. Connect the camera to a USB power source using the provided USB cable. The charging indicator light will typically turn off or change color when fully charged.
- Insert Micro SD Card: Open the camera's side or bottom compartment. Insert a compatible Micro SD card (Class 10 or higher, up to 32GB recommended) into the designated slot with the contacts facing the correct direction. Ensure it clicks into place.
- Format Micro SD Card: For optimal performance, it is recommended to format the Micro SD card using the camera's menu system before first use and periodically thereafter. (Instructions for formatting are in the Operating Instructions section).
- Assemble Waterproof Case: If the camera is not already in its waterproof case, carefully place the camera inside the case, ensuring all seals are clean and free of debris. Close the latch securely. Perform a water test without the camera inside if using for the first time in water.
Operating Instructions
Power On/Off:
- To power on, press and hold the Power/Mode Button for approximately 3 seconds.
- To power off, press and hold the Power/Mode Button again for approximately 3 seconds until the screen turns off.
Mode Selection:
- After powering on, short press the Power/Mode Button to cycle through available modes: Video Recording, Photo Capture, and Playback. The current mode icon will be displayed on the screen.
Video Recording:
- Select Video Recording mode.
- Press the Shutter/Record Button once to start recording. A red indicator light will typically flash, and a recording icon will appear on the screen.
- Press the Shutter/Record Button again to stop recording. The indicator light will stop flashing.
Photo Capture:
- Select Photo Capture mode.
- Press the Shutter/Record Button once to take a photo. The screen may briefly flash.
Playback:
- Select Playback mode.
- Use the Navigation Buttons (if available) to browse through your recorded videos and photos.
- Press the Shutter/Record Button to play a selected video or view a photo.
Menu Settings:
- From any mode, press the Power/Mode Button repeatedly until the settings menu appears.
- Use the Navigation Buttons to scroll through options.
- Press the Shutter/Record Button to select an option or confirm a setting.
- Common settings include: Video Resolution, Loop Recording, Exposure, White Balance, Date/Time, Language, Format SD Card, and Factory Reset.
Connecting to a Computer:
- Ensure the camera is powered off.
- Connect the camera to your computer using the provided USB cable.
- The camera should appear as a removable disk drive. You can then access and transfer your files.
Maintenance
- Cleaning the Lens: Use a soft, lint-free cloth specifically designed for optical lenses. Avoid using harsh chemicals or abrasive materials.
- Cleaning the Waterproof Case: After use in water, rinse the case with fresh water and allow it to air dry. Ensure the O-ring seal is clean and free of sand or debris. Periodically check the O-ring for cracks or damage and replace if necessary to maintain waterproof integrity.
- Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
- Battery Care: Avoid fully discharging the battery frequently. Charge the battery regularly, even if not in use, to maintain its lifespan.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Camera does not power on. | Ensure the battery is fully charged. Connect to a power source and try again. |
| Cannot record video or take photos. | Check if a Micro SD card is inserted and properly formatted. Ensure there is sufficient storage space. |
| Poor video/photo quality. | Clean the camera lens. Check video resolution settings in the menu. Ensure adequate lighting. |
| Water leakage into the case. | Immediately remove the camera. Check the waterproof case's O-ring seal for debris, cracks, or improper seating. Ensure the latch is securely closed. |
| Camera freezes or becomes unresponsive. | Press and hold the Power/Mode button for an extended period (e.g., 10-15 seconds) to force a shutdown. If issues persist, perform a factory reset via the menu (this will erase settings). |
Specifications
| Feature | Detail |
|---|---|
| Brand | iTek |
| Model Number | qtmdpx-056 |
| Video Capture Resolution | 720p |
| Photo Sensor Technology | CMOS |
| Screen Size | 2 Inches (5.08 cm) |
| Flash Memory Type | Micro SD |
| Connectivity Technology | USB |
| Special Features | Lightweight, Waterproof |
| Item Weight | 1.17 pounds (approx. 0.53 kg) |
| Package Dimensions | 9.92 x 4.25 x 4.06 inches (approx. 25.2 x 10.8 x 10.3 cm) |
Warranty and Support
For warranty information, please refer to the documentation included with your purchase. For technical support, product registration, or service inquiries, please contact iTek customer service through their official channels or visit the official iTek website.
