Sluban M38-B0510

Download PDF
Contents

Sluban F-35 Lighting II Fighter Jet Building Blocks Instruction Manual

Model: M38-B0510

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of the Sluban F-35 Lighting II Fighter Jet building block set, model M38-B0510. Please read this manual thoroughly before beginning assembly to ensure correct construction and safe use.

2. Safety Information

  • Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Adult supervision is recommended for children aged 6 and up.
  • Material Safety: The blocks are made from ABS plastic, which is non-toxic.
  • Proper Use: Do not throw or misuse the assembled model.
  • Storage: Store blocks and assembled models away from extreme temperatures and direct sunlight to prevent deformation or damage.

3. Package Contents

Verify that all components are present before starting assembly. The package for model M38-B0510 should contain:

  • 252 x Building Block Pieces
  • 1 x Sluban Soldier Figure
  • 1 x Sticker Sheet
  • 1 x Instruction Manual (this document)
Sluban F-35 Lighting II Fighter Jet building block set box with dimensions

Image: Product packaging for the Sluban F-35 Lighting II Fighter Jet set, showing the box with dimensions 42.5cm x 28.5cm x 6.7cm.

4. Assembly (Setup)

Follow the step-by-step diagrams provided in the included printed instruction booklet to assemble the F-35 Lighting II Fighter Jet. The assembly process typically involves:

  1. Preparation: Unpack all components and organize them by color and shape to facilitate identification.
  2. Base Construction: Begin by building the core structure of the fighter jet, typically starting with the fuselage.
  3. Wing and Tail Assembly: Attach the wings and tail sections according to the diagrams.
  4. Cockpit and Details: Assemble the cockpit, including the canopy, and add smaller detail pieces.
  5. Landing Gear: Construct and attach the landing gear components.
  6. Figure Assembly: Assemble the Sluban soldier figure.
  7. Sticker Application: Apply the provided stickers to the designated areas on the model for enhanced detail.
Assembled Sluban F-35 Lighting II Fighter Jet with pilot figure

Image: The fully assembled Sluban F-35 Lighting II Fighter Jet model, shown alongside a Sluban pilot figure.

Side view of assembled Sluban F-35 Lighting II Fighter Jet with 360mm length indication

Image: Side view of the assembled F-35 Lighting II Fighter Jet, indicating a total length of 360mm (14.17 inches).

5. Operating Instructions

The Sluban F-35 Lighting II Fighter Jet is a static display model with interactive elements:

  • Movable Parts: Certain sections, such as the cockpit canopy, may be designed to open and close. The landing gear may also be retractable or poseable depending on the design.
  • Pilot Figure: The included Sluban soldier figure can be placed inside the cockpit. The figure's head and wrists can rotate 15 degrees, and the waist can rotate 360 degrees.
  • Display: The completed model is suitable for display on a flat surface.
Sluban F-35 Lighting II Fighter Jet model with simulated engine thrust

Image: The F-35 Lighting II Fighter Jet model depicted with a simulated glowing engine exhaust, illustrating its dynamic appearance.

6. Maintenance

  • Cleaning: To clean the blocks or assembled model, wipe gently with a dry, soft cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the model in a clean, dry environment, away from direct sunlight and extreme temperatures, to prevent discoloration or material degradation.
  • Disassembly: If disassembling the model, do so carefully to avoid damaging the connection points of the blocks. Store disassembled blocks in a container to prevent loss.

7. Troubleshooting

  • Missing Pieces: If you find any missing pieces, carefully re-check the packaging and all assembled sections. If pieces are still missing, contact Sluban customer support.
  • Difficulty Connecting Blocks: Ensure blocks are aligned correctly. Apply firm, even pressure. Avoid forcing blocks together, as this can cause damage.
  • Model Instability: Double-check all connections according to the instruction diagrams. Ensure blocks are fully pressed together.

8. Specifications

Feature Detail
Model Number M38-B0510
Product Name F-35 Lighting II Fighter Jet
Brand Sluban
Material ABS Plastic
Number of Pieces 252
Assembled Length 14.17 inches (360 mm)
Recommended Age 6 years and up
Color Grey (similar to real F-35)
GTIN/UPC 713289946043

9. Warranty and Support

Sluban products are manufactured to high-quality standards. For any inquiries regarding missing parts, assembly assistance, or product defects, please refer to the contact information provided on the product packaging or visit the official Sluban website for customer support. Please retain your proof of purchase for any warranty claims.

© 2024 Sluban. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.