1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima Black Aluminum Outdoor LED Wall Pack Light, Model MEL-23100W. This fixture is designed for outdoor use, featuring an automatic dusk-to-dawn photocell sensor for convenient and energy-efficient lighting.
Please read these instructions thoroughly before installation and retain them for future reference.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are made correctly and securely.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Wear safety glasses and gloves during installation.
- This fixture is rated for 120VAC / 60Hz. Ensure your power supply matches these requirements.
- Do not look directly into the LED light source when illuminated.
3. Package Contents
Verify that all components are present before beginning installation:
- Maxxima Outdoor LED Wall Pack Light (Model MEL-23100W)
- Mounting Hardware (screws, wire nuts)
- Instruction Manual (this document)
Figure 3.1: Product packaging showing the Maxxima Outdoor LED Wall Pack Light.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | MEL-23100W |
| Power Consumption | 23 Watts |
| Light Output | 1200 Lumens |
| Color Temperature | 3000K Warm White |
| Color Rendering Index (CRI) | 84 |
| Voltage | 120VAC / 60Hz |
| Average Rated Life | 35,000 Hours |
| Sensor Type | Dusk-to-Dawn Photocell |
| Material | Cast Aluminum, Polycarbonate Lens |
| Dimensions (L x W x H) | 7.68" x 4.33" x 9.84" |
| Water Resistance | Waterproof |
| Certifications | ETL Listed |
Figure 4.1: Product dimensions of the Maxxima Outdoor LED Wall Pack Light.
5. Installation Instructions
Important: Before starting installation, ensure power is disconnected at the circuit breaker or fuse box to prevent electric shock.
- Prepare the Mounting Surface: Ensure the mounting surface is clean, dry, and structurally sound. This fixture is designed for wall mounting.
- Attach Mounting Bracket: Secure the provided mounting bracket to the junction box on the wall using the screws included. Ensure the bracket is level and firmly attached.
- Wiring Connections:
- Connect the black wire from the fixture to the black (live) wire from the power supply using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the power supply using a wire nut.
- Connect the green (ground) wire from the fixture to the bare copper or green ground wire from the power supply using a wire nut.
Figure 5.1: Rear view of the fixture with mounting bracket and wiring connections.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the wall and sealed to prevent water entry.
- Restore Power: Once the fixture is securely mounted and all connections are checked, restore power at the circuit breaker.
Figure 5.2: Example of the Maxxima Outdoor LED Wall Pack Light installed on an exterior wall.
6. Operating Instructions
This Maxxima LED Wall Pack Light features an integrated dusk-to-dawn photocell sensor for automatic operation.
- Automatic Operation: Once power is supplied to the fixture, the photocell sensor will detect ambient light levels.
- The light will automatically turn ON when the ambient light level drops (at dusk).
- The light will automatically turn OFF when the ambient light level rises (at dawn).
Note: Ensure the photocell sensor (small clear dome on top of the fixture) is not obstructed by objects, dirt, or other light sources, as this may interfere with its proper operation.
Figure 6.1: Key features including the dusk-to-dawn sensor.
7. Maintenance
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear.
- Photocell Sensor: Keep the photocell sensor clean and free from obstructions to ensure proper dusk-to-dawn functionality.
- The integrated LED light source is designed for long life and is not user-replaceable.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn ON at dusk. |
|
|
| Light stays ON during the day. |
|
|
| Light flickers or dims. |
|
|
9. Warranty and Support
This Maxxima Outdoor LED Wall Pack Light (Model MEL-23100W) is backed by a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover damage caused by improper installation, misuse, abuse, accidents, or unauthorized modifications.
For warranty claims, technical support, or further assistance, please contact Maxxima customer service:
- Website: www.maxximastyle.com (Example link, actual link not provided in JSON)
- Phone: Refer to Maxxima's official website for current contact information.
- Please have your model number (MEL-23100W) and proof of purchase available when contacting support.
