RCF Sub 8006-AS Active Dual 18-inch Subwoofer Instruction Manual

1. Introduction

Thank you for choosing the RCF Sub 8006-AS Active Dual 18-inch Subwoofer. This professional-grade subwoofer is designed to deliver powerful and accurate low-frequency reproduction for various sound reinforcement applications. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your RCF Sub 8006-AS. Please read this manual thoroughly before using the product.

2. Safety Information

WARNING: To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• This product is heavy. Exercise caution when lifting or moving to prevent injury.

3. Package Contents

Verify that all items are present and in good condition upon unpacking. If any items are missing or damaged, contact your dealer immediately.

• RCF Sub 8006-AS Active Dual 18-inch Subwoofer
• Power Cable (Powercon type)
• Instruction Manual (this document)

4. Product Overview

The RCF Sub 8006-AS is a high-performance active subwoofer featuring dual 18-inch woofers with 4-inch voice coils, designed for robust and extended low-frequency output.

Key Features:

• Active 2x18" subwoofer with 4" voice coil
• Integrated amplifier for optimal performance
• Robust construction for professional use
• Multiple connectivity options (XLR, Powercon, Bluetooth)
• Onboard controls for sound adjustment

Component Identification:

Figure 4.1: Front view of the RCF Sub 8006-AS subwoofer, showcasing the protective grille and RCF logo. This image displays the overall robust design of the unit.

Figure 4.2: Front view with grille removed, revealing the dual 18-inch woofers. This illustrates the powerful speaker configuration responsible for deep bass.

Figure 4.3: Rear panel of the subwoofer, showing the amplifier module, input/output connectors (XLR, Powercon), and control knobs. This is where all audio and power connections are made, and settings are adjusted.

Figure 4.4: Top view of the subwoofer, highlighting the integrated handles for transport and the pole mount socket for attaching a satellite speaker.

5. Setup

5.1 Placement

Proper placement is crucial for optimal sound performance and safety.

• Stable Surface: Place the subwoofer on a flat, stable, and level surface capable of supporting its significant weight (approximately 120 lbs).
• Ventilation: Ensure adequate space around the rear amplifier panel for proper ventilation to prevent overheating. Do not block ventilation openings.
• Room Acoustics: Experiment with placement within the room to achieve the best bass response. Corner placement often enhances bass, but can also lead to muddiness.
• Pole Mount: If using the integrated pole mount for a satellite speaker, ensure the pole and speaker are securely seated and stable.

5.2 Connections

Always ensure the subwoofer is powered off before making any connections.

1. Audio Input (XLR): Connect your audio source (e.g., mixer, audio interface) to the XLR input(s) on the rear panel using high-quality XLR cables. The Sub 8006-AS supports both stereo and mono input configurations.
2. Audio Output (XLR): Use the XLR output(s) to send the processed audio signal to full-range speakers or other subwoofers.
3. Power Connection (Powercon): Connect the provided Powercon power cable to the Powercon inlet on the rear panel, then plug the other end into a grounded AC power outlet. Ensure the power source matches the voltage requirements specified on the unit.
4. Bluetooth (Optional): For wireless audio streaming, activate Bluetooth on your source device and pair it with the Sub 8006-AS. Refer to the operating section for detailed Bluetooth pairing instructions.

5.3 Initial Power On

Once all connections are secure:

1. Ensure the volume/gain control on the subwoofer is set to its minimum position.
2. Power on your audio source devices first.
3. Flip the power switch on the RCF Sub 8006-AS to the "ON" position.
4. Slowly increase the volume/gain on the subwoofer to the desired listening level.

6. Operating Instructions

6.1 Onboard Controls

The rear panel features various controls to fine-tune the subwoofer's performance. (Refer to Figure 4.3 for visual reference).

• Gain/Volume: Adjusts the overall output level of the subwoofer.
• Crossover Frequency: Sets the upper frequency limit for the subwoofer, determining where it hands off to full-range speakers.
• Phase Switch: Allows you to invert the phase of the subwoofer's output (0° or 180°) to ensure proper alignment with other speakers in your system.
• EQ Presets/Modes: Some models may include preset EQ settings for different applications (e.g., "Deep," "Punch," "Live"). Consult the specific model's detailed manual for available options.

6.2 Bluetooth Connectivity

To connect a Bluetooth device:

1. Ensure the subwoofer is powered on.
2. Activate Bluetooth on your source device (smartphone, tablet, etc.).
3. Search for available Bluetooth devices. The subwoofer should appear as "RCF Sub 8006-AS" or similar.
4. Select the subwoofer to pair. A confirmation sound or indicator light may signal a successful connection.
5. Once paired, you can stream audio wirelessly to the subwoofer.

Note: Bluetooth is primarily for convenience and may not be suitable for critical professional audio applications where wired connections are preferred for stability and audio quality.

7. Maintenance

• Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or waxes.
• Ventilation: Regularly check that the ventilation openings on the amplifier panel are free from dust and debris. Use a soft brush or compressed air to clear them if necessary.
• Storage: If storing the subwoofer for an extended period, ensure it is in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures. Cover the unit to protect it from dust.
• Inspection: Periodically inspect power cables and audio cables for any signs of damage. Replace damaged cables immediately.

8. Troubleshooting

If the problem persists after trying these solutions, please contact RCF customer support or a qualified service technician.

9. Specifications

Note: Specifications are subject to change without notice.

10. Warranty and Support

10.1 Limited Warranty

The RCF Sub 8006-AS is covered by a Limited Warranty. The terms and conditions of this warranty are provided separately with your purchase or can be found on the official RCF website. Please retain your proof of purchase for warranty claims. This warranty typically covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

10.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact RCF customer support through their official website or your authorized dealer.

• RCF Official Website: www.rcf.it (for support contact information and product registration)
• Authorized Dealer: Contact the retailer from whom you purchased the product.