Introduction
Thank you for choosing the Catnapper Preston 4850 Power Lift Chair & Recliner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new chair. Please read these instructions thoroughly before assembly and use, and retain them for future reference.
Safety Information
- Ensure all connections are secure before operating the chair.
- Keep children and pets away from the chair's moving parts.
- Do not allow anyone to sit on the footrest when it is extended.
- Avoid placing hands or feet near the mechanism during operation.
- Do not exceed the maximum weight capacity of 300 pounds.
- Unplug the chair from the power outlet before cleaning or servicing.
- If the power cord is damaged, contact customer support for replacement.
Package Contents
Verify that all components are present before beginning assembly:
- Chair Base
- Chair Back
- Power Transformer
- Power Cord
- Hand-held Remote Control
Setup Instructions
- Unpack Components: Carefully remove all parts from the packaging. Place the chair base in the desired location, ensuring sufficient space for reclining and lifting functions.
- Attach Chair Back: Align the metal receivers on the chair back with the posts on the chair base. Push down firmly until the back locks securely into place. You should hear a click.
- Connect Power: Locate the power cord connection point at the rear of the chair base. Connect the power transformer to the chair, then plug the power cord into the transformer, and finally into a standard wall outlet.
- Remote Control: The hand-held remote control is pre-connected. Ensure its cable is not pinched by any moving parts.
Image: The Catnapper Preston 4850 Power Lift Recliner shown in multiple color options, including Coffee, Smoke, Berry, and Mocha. This image illustrates the traditional design and plush cushioning of the chair.
Operating Instructions
The Catnapper Preston 4850 is operated using the included hand-held remote control.
Using the Remote Control
- Recline Function: Press and hold the 'Recline' button to smoothly move the chair into a reclined position. Release the button when the desired angle is reached.
- Upright Function: Press and hold the 'Upright' button to return the chair to its standard sitting position.
- Power Lift Function: From the upright position, press and hold the 'Lift' button. The chair will gently tilt forward and rise, assisting the user to a standing position. Release the button when comfortable.
- Lower Function: From the lifted position, press and hold the 'Lower' button to gently bring the chair back down to the upright sitting position.
Always ensure the area around the chair is clear before operating any function.
Maintenance
Cleaning
- Fabric Care: The chair's textile upholstery should be spot cleaned only. Use a mild, water-free solvent or dry cleaning product. Test on an inconspicuous area first.
- Frame and Mechanism: Periodically inspect the chair's frame and mechanism for any loose bolts or connections. Tighten as necessary. Do not lubricate the mechanism unless specifically instructed by customer support.
- Remote Control: Wipe the remote control with a soft, dry cloth. Avoid using liquid cleaners.
General Care
- Avoid direct sunlight to prevent fading of the fabric.
- Keep the chair away from heat sources and excessive moisture.
- Do not stand on the chair or use it as a step stool.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not operate | No power supply | Check if the power cord is securely plugged into the wall outlet and the chair. Ensure the wall outlet is functional. |
| Remote control unresponsive | Loose connection or damaged remote | Check the remote control cable connection to the chair. If still unresponsive, contact customer support. |
| Chair makes unusual noises | Loose hardware or mechanism issue | Inspect for loose bolts and tighten. If noise persists, discontinue use and contact customer support. |
| Chair moves slowly or unevenly | Low power or obstruction | Ensure the power supply is stable. Check for any obstructions preventing smooth movement of the mechanism. |
Specifications
- Brand: Catnapper
- Model Name: Preston
- Manufacturer Part Number: 4850-2148-28
- Product Dimensions (D x W x H): 39" x 39" x 46"
- Item Weight: 131 pounds
- Maximum Weight Recommendation: 300 pounds
- Material: Textile (Upholstery), Memory Foam (Seat), Foam (Fill)
- Additional Features: Power Lift, Power Recline, Magazine Pocket
- Included Components: Remote Control
- Product Care Instructions: Spot Clean
Image: A diagram illustrating the dimensions of the Catnapper Preston 4850 Power Lift Recliner. The chair measures 46 inches in height, 39 inches in width, and 39 inches in depth.
Warranty Information
The cushions of the Catnapper Preston 4850 Power Lift Chair & Recliner are warranted for 5 years against loss of resiliency. For detailed warranty terms and conditions, please refer to the warranty card included with your purchase or contact Catnapper customer support.
Customer Support
If you have any questions, require assistance, or need to report a problem with your Catnapper Preston 4850 Power Lift Chair & Recliner, please contact Catnapper customer support. Refer to the contact information provided in your product packaging or visit the official Catnapper website for support options.
