Volteck LED MR16 Lamp 127V 6W Daylight Instruction Manual

1. Introduction

This instruction manual provides important information for the safe and efficient use of your Volteck LED MR16 Lamp. This lamp is designed to provide bright, energy-efficient illumination with a daylight white color temperature. Please read this manual thoroughly before installation and operation.

Figure 1: Volteck LED MR16 Lamp, showing the multi-LED array and two-pin base.

2. Safety Information

Disconnect Power: Always ensure the power supply to the fixture is turned off before installing, removing, or cleaning the lamp.
Proper Voltage: This lamp is designed for 127V electrical systems. Do not use with incompatible voltage.
Indoor Use Only: This product is intended for indoor use in dry locations. Do not expose to moisture or outdoor elements.
Do Not Disassemble: Do not attempt to open or modify the lamp. There are no user-serviceable parts inside.
Avoid Direct Eye Exposure: Do not stare directly into the operating lamp, as the bright light may cause discomfort.
Handle with Care: Avoid dropping or subjecting the lamp to strong impacts.

3. Setup and Installation

Follow these steps to properly install your Volteck LED MR16 lamp:

Turn Off Power: Locate the light switch or circuit breaker controlling the fixture and turn off the power supply.
Remove Old Lamp (if applicable): If replacing an existing lamp, allow it to cool completely before carefully removing it from the fixture.
Insert New Lamp: Align the two pins of the Volteck LED MR16 lamp with the corresponding holes in the fixture's socket. Gently push the lamp into the socket until it is securely seated. Do not force it.
Restore Power: Once the lamp is securely installed, turn the power supply back on at the switch or circuit breaker.
Test: Turn on the light switch to verify the lamp is functioning correctly.

4. Operating Instructions

The Volteck LED MR16 lamp operates like a standard light bulb. Simply use the wall switch or fixture control to turn the light on or off. The LED lamp will provide instant full brightness upon activation.

5. Maintenance

Cleaning: Ensure the power is off and the lamp is cool before cleaning. Wipe the lamp with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or harsh chemicals, as these may damage the lamp.
No User Serviceable Parts: This LED lamp does not contain any user-serviceable parts. Attempting to repair or modify the lamp will void any potential warranty and may pose a safety risk.

6. Troubleshooting

If you encounter issues with your Volteck LED MR16 lamp, refer to the following common troubleshooting steps:

Lamp Does Not Light Up:
- Ensure the power supply to the fixture is on.
- Check that the lamp is securely inserted into the fixture's socket.
- Verify that the fixture itself is working correctly (test with another known-good lamp if possible).
- Confirm the voltage of your electrical system matches the lamp's requirements (127V).
Lamp Flickers:
- Ensure the lamp is fully seated in the socket.
- Check for loose wiring in the fixture or switch (consult a qualified electrician if unsure).
- Verify that the fixture is compatible with LED lamps. Some older dimmer switches may not be compatible with LED technology and can cause flickering.

If these steps do not resolve the issue, please contact Volteck customer support or consult a qualified electrician.

7. Specifications

Feature	Detail
Brand	Volteck
Model Number	46180
Light Type	LED
Bulb Shape Size	MR16
Light Color	Daylight White
Voltage	127 Volts
Wattage	6 Watts (LED source), 40 watts (equivalent)
Item Weight	0.704 ounces
Dimensions (Package)	3.9 x 3.43 x 1.93 inches
Control Method	Remote (Note: This specification might refer to a broader product line capability or a specific remote-controlled fixture, as the bulb itself is typically controlled by a wall switch.)

8. Warranty and Support

Specific warranty details for the Volteck LED MR16 Lamp are not provided within this document. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging or visit the official Volteck website.

For technical support or further assistance, please contact Volteck customer service through their official channels.

	Installation Instructions for Electrical Product Step-by-step installation guide for an electrical product, including safety warnings and product specifications. Covers wiring, mounting, and electrical safety precautions.
	Volteck Electrical Outlet Installation and Safety Guide This guide provides instructions for installing a Volteck electrical outlet, emphasizing safety precautions and proper usage. It includes warnings about electrical hazards and suffocation risks associated with plastic bags.
	Electrical Component Installation Guide and Safety Warnings Comprehensive installation instructions and critical safety warnings for an electrical component, including product specifications, certification details, and usage guidelines. Content is presented in English.
	Volteck LED Luminaire: Specifications, Installation, and Warranty Detailed specifications, step-by-step installation instructions, cleaning guidelines, and warranty information for the Volteck LED luminaire by Grupo Truper. Includes technical details and safety precautions.
	Luminario LED Volteck: Especificaciones e Instructivo de Instalación Información detallada sobre el luminario LED Volteck, incluyendo especificaciones técnicas, guía de instalación paso a paso, garantía y consejos de limpieza. Producto de Grupo Truper.
	Volteck Luminario LED: Especificaciones e Instructivo de Instalación Guía detallada de especificaciones e instalación para el luminario LED Volteck de Grupo Truper, incluyendo datos técnicos, garantía, limpieza y diagramas.

Volteck 46180