Product Overview
The Georgia-Pacific 59491 is an in-wall stainless steel recessed trash receptacle designed for discreet waste disposal in commercial or public restrooms. This unit features a 12-gallon capacity and is constructed from durable stainless steel, ensuring longevity and ease of maintenance. It is specifically designed to fit into standard 16-inch wall cavities.
Image 1: Front view of the Georgia-Pacific 59491 In-Wall Stainless Steel Recessed Trash Receptacle, showcasing its sleek design and open-top access.
Setup and Installation
This receptacle is designed for recessed installation within a wall. Proper installation requires a prepared wall cavity that meets the specified dimensions.
Required Tools and Materials:
- Measuring tape
- Level
- Drill
- Appropriate fasteners (not included, select based on wall material)
- Safety glasses and gloves
Installation Steps:
- Prepare Wall Cavity: Ensure a wall cavity is framed to accommodate the receptacle. The unit is designed for 16-inch wall cavities. Verify the height and depth are sufficient for the unit's dimensions (approximately 63 inches high, 20 inches wide, and 9 inches deep).
- Position the Unit: Carefully insert the receptacle into the prepared wall cavity. Ensure it is level and flush with the wall surface.
- Secure the Unit: Using appropriate fasteners, secure the receptacle to the wall studs through the designated mounting points on the unit's frame. Ensure all fasteners are tightened to prevent movement.
- Final Check: Verify the unit is securely mounted and stable.
Image 2: Side view of the receptacle, illustrating the depth and potential mounting points for secure in-wall installation.
Operating Instructions
The Georgia-Pacific 59491 trash receptacle is designed for straightforward waste disposal.
Using the Receptacle:
- Insert Trash Liner: Place a standard 12-gallon trash bag or liner into the internal compartment of the receptacle. Ensure the bag is properly seated and the edges are folded over the rim to prevent slippage.
- Dispose of Waste: Deposit waste materials through the open top of the receptacle.
- Emptying: When the receptacle is full, remove the trash bag, tie it securely, and dispose of it according to local waste management guidelines. Replace with a new liner.
Image 3: Front view of the receptacle with the internal compartment visible, demonstrating where a trash liner would be placed.
Image 4: Angled view of the top opening, illustrating the access point for waste disposal.
Maintenance
Regular cleaning and maintenance will ensure the longevity and hygienic operation of your stainless steel trash receptacle.
Cleaning Instructions:
- Exterior Cleaning: Wipe the stainless steel surfaces with a soft cloth dampened with a mild soap and water solution. For stubborn stains, use a non-abrasive stainless steel cleaner. Always wipe in the direction of the grain to prevent streaking.
- Interior Cleaning: Periodically clean the interior of the receptacle with a disinfectant cleaner, especially after removing a soiled trash bag. Rinse thoroughly and allow to air dry before inserting a new liner.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, or steel wool, as these can scratch and damage the stainless steel finish.
Troubleshooting
This section addresses common issues you might encounter with the trash receptacle.
Common Issues and Solutions:
- Unit is loose in the wall: This indicates insufficient securing during installation. Re-tighten existing fasteners or add additional fasteners to secure the unit firmly to the wall studs.
- Difficulty inserting/removing trash bags: Ensure you are using the correct size (12-gallon) trash bags. Check for any internal obstructions or debris that might be catching the bag.
- Stainless steel surface shows streaks or fingerprints: Clean the surface with a dedicated stainless steel cleaner and a microfiber cloth, wiping in the direction of the grain. Avoid touching the surface directly after cleaning.
- Unpleasant odors: Ensure the receptacle is emptied regularly. Clean the interior thoroughly with a disinfectant. Consider using odor-absorbing products inside the receptacle if odors persist.
Specifications
Detailed specifications for the Georgia-Pacific 59491 In-Wall Stainless Steel Recessed Trash Receptacle.
| Feature | Specification |
|---|---|
| Model Number | 59491 |
| Brand | Georgia-Pacific |
| Product Dimensions (Overall) | 63 x 20 x 9 inches |
| Weight | 36 Pounds |
| Capacity | 12 Gallons |
| Material | Stainless Steel |
| Color | Stainless Steel |
| Opening Mechanism | Open-Top |
| Shape | Rectangular |
| Finish Type | Stainless Steel |
| Recommended Wall Cavity | 16-inch width |
| Recommended Use | Trash Disposal |
Warranty Information
Specific warranty details for the Georgia-Pacific 59491 In-Wall Stainless Steel Recessed Trash Receptacle are not provided in this manual. Please refer to the product packaging or contact Georgia-Pacific directly for current warranty terms and conditions.
Support
For further assistance, technical support, or inquiries regarding your Georgia-Pacific 59491 trash receptacle, please contact Georgia-Pacific customer service. You may find contact information on the official Georgia-Pacific website or on the product packaging.
You can also visit the Georgia-Pacific Store on Amazon for more product information.
