Maxxus Saunas MX-J206-01 Seattle

Download PDF
Contents

Maxxus Saunas MX-J206-01 Seattle Carbon Far Infrared Sauna User Manual

Model: MX-J206-01 Seattle | Brand: Maxxus Saunas

1. Introduction

This manual provides essential information for the safe and efficient use of your Maxxus Saunas MX-J206-01 Seattle Carbon Far Infrared Sauna. Please read all instructions carefully before assembly and operation to ensure proper function and longevity of your product. This 2-person luxury sauna is designed for comfort and privacy within your home, featuring Canadian Hemlock Wood construction and advanced far infrared carbon heating technology.

Important Safety Information

  • Always consult a physician before using a sauna, especially if you have pre-existing health conditions.
  • Do not use the sauna if pregnant, under the influence of alcohol, or experiencing a fever.
  • Ensure the sauna is properly assembled and connected to a standard 15Amp electrical outlet.
  • Keep children and pets away from the sauna during operation.
  • Avoid prolonged exposure to high temperatures. Optimal operating temperature is between 120°F to 130°F.
  • Do not spray water or other liquids directly onto the heating elements or control panel.

2. Product Components

Your Maxxus Seattle Carbon Far Infrared Sauna includes the following key components:

  • Hemlock Wood Cabin: Constructed from Canadian Hemlock Wood for durability and aesthetic appeal.
  • Far Infrared Carbon Heating Panels: Six panels strategically placed (two on the rear wall, one on each side wall, one under the bench, and one on the floor board) for comprehensive heat distribution.
  • Reflexology Heating System: An integrated floor heater designed for foot comfort.
  • Tempered Glass Door and Panels: Provides visibility and enhances the sauna's design.
  • Interior Control Panel: Allows for easy adjustment of temperature and time settings.
  • MP3 Auxiliary Connection and Speakers: For audio entertainment during your sauna session.
  • Interior Reading Lamp: Provides illumination inside the sauna.
  • Bench: Comfortable seating for two persons.
Maxxus Seattle Carbon Far Infrared Sauna exterior
Figure 2.1: Exterior view of the Maxxus Seattle Carbon Far Infrared Sauna, showcasing its Hemlock wood construction and tempered glass door.

This image displays the complete sauna unit from an exterior angle, highlighting the natural wood finish and the full-length glass door. The design emphasizes both functionality and aesthetic integration into a home environment.

Maxxus Seattle Carbon Far Infrared Sauna interior with heating panels
Figure 2.2: Interior view of the sauna, showing the bench and carbon heating panels on the rear and side walls.

This image provides a clear view of the sauna's interior, illustrating the placement of the wooden bench and the slatted covers over the carbon heating panels on the back and side walls. The floor heating element is also visible beneath the bench.

Close-up of a Maxxus sauna carbon heating panel
Figure 2.3: Detailed view of a carbon heating panel with its protective wooden grate.

This close-up image focuses on one of the carbon heating panels, showing the wooden slats that protect the heating element while allowing infrared heat to radiate effectively into the sauna cabin.

3. Setup and Installation

The Maxxus Seattle Sauna is designed for relatively easy assembly. It is recommended that two adults perform the installation, which typically takes approximately 60 minutes.

3.1 Site Selection

  • Choose an indoor location such as a basement, master bathroom, walk-in closet, or fitness room.
  • The sauna can be installed on various floor types, including carpet.
  • Ensure the chosen location has access to a standard 15Amp electrical outlet.
  • Verify that the dimensions of the space accommodate the sauna: 47.2 inches wide, 41.3 inches deep, and 74.8 inches tall.

3.2 Assembly Steps (General)

  1. Unpacking: Carefully unpack all components and verify against the packing list.
  2. Base Assembly: Position the sauna base in the desired location.
  3. Wall Panel Installation: Attach the rear, side, and front wall panels according to the detailed instructions provided in your physical manual. Ensure all connections are secure.
  4. Bench and Heater Installation: Install the interior bench and ensure all heating panels are correctly positioned and connected.
  5. Roof Panel Placement: Secure the roof panel, ensuring all electrical connections for lighting and control panel are properly routed and connected.
  6. Door Installation: Mount the tempered glass door.
  7. Electrical Connection: Plug the sauna into a dedicated standard 15Amp electrical outlet. Do not use extension cords.

Note: For detailed, step-by-step assembly instructions, please refer to the comprehensive manual included with your product packaging.

4. Operating Instructions

Your Maxxus Seattle Sauna features an intuitive interior control panel for easy operation.

Maxxus sauna interior control panel
Figure 4.1: Interior control panel for temperature and time settings.

This image shows the digital control panel located inside the sauna, featuring displays for temperature and time, along with buttons for power, heat, and adjustments.

4.1 Basic Operation

  1. Power On: Press the 'Power' button on the interior control panel. The display will illuminate.
  2. Set Temperature: Use the 'Up' and 'Down' arrows next to the 'Temperature' display to set your desired temperature. The sauna operates up to a maximum of 140°F (60°C). The optimal operating range for most users is between 120°F (49°C) to 130°F (54°C).
  3. Set Time: Use the 'Up' and 'Down' arrows next to the 'Timer' display to set your desired session duration.
  4. Heating: The heating elements will activate automatically once the settings are confirmed. Allow approximately 10-15 minutes for the sauna to reach the set temperature.
  5. Power Off: Press the 'Power' button again to turn off the sauna after your session.

4.2 Using the MP3 Auxiliary Connection

The sauna is equipped with an MP3 auxiliary connection and built-in speakers for your audio entertainment.

Maxxus sauna MP3 auxiliary input
Figure 4.2: Close-up of the MP3 auxiliary input jack.

This image shows the circular metallic plate with the "MP3 AUX INPUT" label and the 3.5mm audio jack, indicating where to connect an external audio device.

  1. Locate the MP3 AUX INPUT jack inside the sauna.
  2. Connect your MP3 player or other audio device using a standard 3.5mm audio cable (not included).
  3. Control volume and track selection directly from your connected audio device.

4.3 Interior Reading Lamp

To activate the interior reading lamp, press the 'Light' button on the control panel. Press it again to turn off the lamp.

5. Maintenance and Care

Regular maintenance ensures the longevity and optimal performance of your Maxxus Seattle Sauna.

5.1 Cleaning the Sauna

  • Wood Surfaces: Wipe down interior and exterior wood surfaces with a clean, damp cloth after each use. For deeper cleaning, use a mild, non-toxic wood cleaner specifically designed for saunas. Avoid harsh chemicals or abrasive cleaners.
  • Glass Door: Clean the tempered glass door with a standard glass cleaner and a soft cloth.
  • Heating Panels: Do not attempt to clean the heating panels directly with liquids. Dust them gently with a dry cloth if necessary.
  • Floor: The floor can be swept or vacuumed to remove any debris.

5.2 General Care

  • Ensure the sauna is completely dry before closing the door for extended periods.
  • Periodically check all electrical connections and screws to ensure they are secure.
  • Avoid placing heavy objects on the sauna roof or leaning against the glass panels.
  • Do not modify the sauna or its electrical components.

6. Troubleshooting

This section addresses common issues you might encounter with your Maxxus Seattle Sauna. For problems not listed here, please contact customer support.

ProblemPossible CauseSolution
Sauna does not power on.
  • Power cord not fully plugged in.
  • Circuit breaker tripped.
  • Control panel malfunction.
  • Ensure power cord is securely plugged into a 15Amp outlet.
  • Check and reset the circuit breaker.
  • Contact customer support if the issue persists.
Sauna is not heating or not reaching desired temperature.
  • Temperature setting too low.
  • Door not fully closed.
  • Heating element malfunction.
  • Increase the temperature setting on the control panel.
  • Ensure the sauna door is securely latched.
  • Contact customer support.
MP3 audio not working.
  • Audio cable not connected properly.
  • Volume on audio device too low.
  • Speakers malfunction.
  • Verify the 3.5mm audio cable is fully inserted into both the device and the sauna's AUX input.
  • Increase the volume on your connected audio device.
  • Contact customer support.

7. Product Specifications

Key technical specifications for the Maxxus Saunas MX-J206-01 Seattle Carbon Far Infrared Sauna:

  • Model Number: MX-J206-01 Seattle
  • Product Dimensions (W x D x H): 47.2 x 41.3 x 74.8 inches (119.9 x 104.9 x 189.9 cm)
  • Item Weight: Approximately 230 pounds (104.3 kg)
  • Material: Canadian Hemlock Wood, Tempered Glass
  • Heating Elements: 6 Far Infrared Carbon Heating Panels (2 rear, 2 side, 1 under bench, 1 floor)
  • Power Requirement: Standard 15Amp household outlet
  • Maximum Operating Temperature: 140°F (60°C)
  • Optimal Operating Temperature: 120°F - 130°F (49°C - 54°C)
  • Seating Capacity: 2 Persons
  • Features: Interior Control Panel, MP3 Auxiliary Connection, Built-in Speakers, Interior Reading Lamp, Reflexology Heating System.

8. Warranty and Customer Support

8.1 Warranty Information

Specific warranty details for your Maxxus Saunas MX-J206-01 are typically provided with your purchase documentation. Please refer to the warranty card or contact the retailer/manufacturer directly for comprehensive information regarding coverage, terms, and conditions. General return policies, such as a 30-day easy return period, may apply through your point of purchase.

8.2 Customer Support

For technical assistance, troubleshooting guidance beyond this manual, or inquiries regarding parts and service, please contact Maxxus Saunas customer support. Contact information can usually be found on the manufacturer's website or in your product packaging. When contacting support, please have your model number (MX-J206-01 Seattle) and purchase date readily available.

You can also visit the Maxxus Store on Amazon for more product information.

© 2025 Maxxus Saunas. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.