Introduction
The Flashpoint Zoom Li-Ion R2 TTL On-Camera Flash Speedlight (V860IIN) is designed to provide powerful and versatile lighting for Nikon cameras. This unit features a rechargeable Li-ion battery for extended use and fast recycling times, along with advanced R2 Remote TTL connectivity for seamless integration with Nikon's strobe functions. It supports iTTL, Exposure Compensation (FEC), High Speed Sync (HSS), and an automatically zooming flashhead, offering comprehensive control over your lighting setup.
Safety Information
- Do not disassemble or modify the unit. This may result in electric shock or malfunction.
- Keep the unit dry. Do not handle with wet hands or immerse in water.
- Do not use the flash unit in the presence of flammable gases, chemicals, or other materials.
- Avoid direct eye exposure to the flash. It may cause temporary visual impairment.
- Keep out of reach of children.
- Use only the specified battery and charger. Improper use may lead to fire or explosion.
Product Overview
The Flashpoint Zoom Li-Ion R2 TTL Flash is a compact and powerful speedlight. Its design allows for flexible positioning and easy control through an intuitive LCD interface.
The unit features a rotatable flash head, a clear LCD display for settings, and a hot shoe for secure camera mounting. The controls are logically arranged for quick adjustments during shooting.
Getting Started: Setup
1. Unpacking
Carefully remove all items from the packaging. Ensure the following components are present:
- Flashpoint Zoom Li-Ion R2 TTL Flash Unit
- Li-ion Battery Pack
- Battery Charger
- Power Cable
- Mini Stand
2. Battery Installation and Charging
Insert the provided Li-ion battery into the battery compartment located on the side of the flash unit. Ensure it clicks securely into place. For initial use, fully charge the battery using the supplied charger and power cable. The charger's indicator light will show charging status.
3. Mounting the Flash on Camera
Slide the flash unit's hot shoe onto your Nikon camera's hot shoe mount. Secure it by rotating the locking ring clockwise until it is firm. Ensure the flash is properly seated to establish electrical contact with the camera.
Operating the Flash
1. Power On/Off
To power on the flash, slide the ON/OFF switch to the 'ON' position. The LCD screen will illuminate. To power off, slide the switch to 'OFF'.
2. Basic Controls and Display
The flash features an intuitive control panel with an LCD screen. Use the MODE button to cycle through different flash modes (TTL, Manual, Multi). The SET button confirms selections, and the dial/directional buttons adjust values.
3. Flash Modes
- TTL (Through-The-Lens) Mode: The flash automatically measures the light through the camera's lens and adjusts its output for optimal exposure. This is ideal for quick shooting and changing light conditions.
- Manual Mode (M): Allows you to manually set the flash power output (e.g., 1/1, 1/2, 1/4, etc.). This provides precise control for consistent lighting in controlled environments.
- Multi (Stroboscopic) Mode: Fires a series of rapid flashes during a single exposure, useful for capturing multiple movements of a subject in one frame.
4. Advanced Features
- R2 Radio System: The integrated 2.4GHz R2 Radio System enables wireless control of multiple Flashpoint R2 compatible strobes. It supports master and slave modes, allowing for complex off-camera lighting setups with reliable triggering and power adjustments.
- High Speed Sync (HSS): Allows the flash to synchronize with shutter speeds faster than the camera's native flash sync speed, enabling the use of flash in bright ambient light or with wide apertures.
- Zoom Function: The flash head can automatically or manually adjust its zoom position to match the focal length of your lens, ensuring efficient light coverage.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the flash unit. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
- Battery Care: Store the Li-ion battery in a cool, dry place when not in use. If storing for extended periods, charge the battery to approximately 50% capacity. Avoid fully discharging the battery for prolonged times.
- Storage: When not in use, store the flash unit in its protective case in a dry, dust-free environment. Remove the battery if storing for a long duration.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire | Low battery; incorrect camera/flash settings; flash not securely mounted. | Charge battery; check camera and flash mode settings; re-mount flash securely. |
| Flash output is too weak/strong | Incorrect flash power setting (Manual mode); exposure compensation (TTL mode). | Adjust manual power; adjust FEC on camera or flash. |
| Flash overheats | Excessive continuous firing. | Allow the flash to cool down. Reduce continuous firing. |
| Wireless triggering issues | Incorrect channel/group settings; distance/obstacles; interference. | Verify channel/group settings; reduce distance; clear line of sight; change channel. |
Specifications
| Feature | Detail |
|---|---|
| Guide Number | 112 (at ISO 100, 105mm) |
| Recycle Time | Less than 1.5 seconds (full power) |
| Flash Duration | 1/300 to 1/20000 seconds |
| Flash Modes | iTTL, Manual, Multi |
| Wireless System | 2.4GHz R2 Radio System (Master/Slave) |
| High Speed Sync (HSS) | Supported |
| Zoom Range | Auto/Manual (20-200mm) |
| Power Source | Li-ion Battery Pack |
| Dimensions | 9 x 8.03 x 3 inches |
| Weight | 2.62 pounds |
Warranty and Support
For warranty information and technical support, please refer to the official Flashpoint website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.
