Introduction
This manual provides essential information for the proper use, installation, and maintenance of your WilTec Automatic Incubator Egg Tray. This spare part is designed for automatic incubators and has a capacity for 56 eggs, facilitating efficient poultry breeding. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Image: The WilTec 56-egg automatic incubator tray, showcasing its design and egg slots.
Product Features
- Spare Part: Specifically designed as a replacement part for automatic incubators.
- Capacity: Accommodates up to 56 eggs, suitable for various poultry types.
- Batch Size: Ideal for medium-sized incubation batches.
- Convenient Replacement: Engineered for easy and straightforward installation and removal.
- Easy Cleaning: Constructed from materials that allow for simple and effective cleaning.
Setup
The WilTec 56-egg tray is designed for quick integration into compatible automatic incubators. Follow these steps for proper setup:
- Unpacking: Carefully remove the egg tray from its packaging. Inspect for any signs of damage during transit.
- Initial Cleaning: Before first use, it is recommended to clean the tray with a mild disinfectant solution and rinse thoroughly with clean water. Allow it to air dry completely.
- Incubator Preparation: Ensure your automatic incubator is clean and ready for operation according to its own instruction manual.
- Tray Placement: Gently slide the egg tray into the designated slot within your incubator. Ensure it sits securely and is properly aligned with any turning mechanisms if applicable.
Image: Detailed views of the egg tray, showing the individual egg compartments and structural design for proper fit within an incubator.
Operating
Once the tray is installed, operating it is straightforward as it integrates with your automatic incubator's functions:
- Egg Placement: Carefully place up to 56 eggs into the individual slots on the tray. Ensure eggs are clean and free from cracks. For optimal incubation, place eggs with the larger, blunt end facing upwards.
- Incubator Operation: Close the incubator lid and initiate the incubation process according to your incubator's specific instructions. The tray will facilitate the automatic turning of eggs if your incubator model supports this feature.
- Monitoring: Regularly monitor the incubation process, including temperature and humidity, as per your incubator's guidelines.
- Hatching: As eggs approach hatching, some incubators may require the removal of the turning tray or transfer to a hatching basket. Consult your incubator manual for specific instructions during the hatching phase.
Maintenance
Proper maintenance ensures the longevity and hygienic operation of your egg tray:
- Regular Cleaning: After each incubation cycle, or if eggs break, remove the tray and clean it thoroughly.
- Cleaning Procedure: Wash the tray with warm, soapy water or a mild disinfectant solution. Use a soft brush to remove any debris from the egg slots.
- Rinsing: Rinse the tray completely with clean water to remove all soap or disinfectant residue.
- Drying: Allow the tray to air dry completely before storing or reusing. Ensure no moisture remains, as this can promote bacterial growth.
- Storage: Store the clean, dry tray in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
This egg tray is a simple mechanical component. Most issues will relate to its fit or cleanliness.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tray does not fit or move smoothly. | Incorrect alignment; debris in incubator rails; incompatible incubator model. | Ensure correct orientation. Clean incubator rails. Verify compatibility with your incubator model (Model 51272-01). |
| Eggs are not turning properly. | Incubator turning mechanism malfunction; tray not seated correctly. | Check your incubator's turning mechanism. Re-seat the tray firmly. |
| Difficulty cleaning egg residue. | Dried egg matter. | Soak the tray in warm, soapy water for 15-30 minutes before scrubbing. |
Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | WilTec |
| Item Model Number | 51272-01 |
| Capacity | 56 Eggs |
| Package Dimensions | 48 x 17 x 17 cm (approximately 18.9 x 6.7 x 6.7 inches) |
| Item Weight | 560 grams (approximately 1.23 lbs) |
| Quantity of Items | 1 |
Warranty and Support
For information regarding warranty, returns, or technical support for your WilTec product, please refer to the documentation provided with your original incubator purchase or visit the official WilTec website. You may also contact WilTec customer service directly for assistance.
WilTec Contact Information:
- Website: www.wiltec.de (General WilTec website, specific contact details may vary by region)
- Customer Service: Refer to your purchase invoice or the WilTec website for the most current contact methods (phone, email, support portal).
