NISSAN Genuine Outside Mirror Cover Instruction Manual

1. Introduction

This manual provides essential information for the installation and care of your NISSAN Genuine Outside Mirror Cover, Part Number 96312-6A01H. This product is designed as a direct replacement or upgrade for compatible NISSAN vehicles. Please read this manual thoroughly before proceeding with installation to ensure proper fitment and safe use.

Image 1: NISSAN Genuine Outside Mirror Cover (Model 96312-6A01H). This image shows the exterior mirror cover, typically made of plastic, designed to fit over the side mirror housing.

2. Safety Information

• Always ensure the vehicle is turned off and the parking brake is engaged before beginning any installation.
• Wear appropriate personal protective equipment, such as gloves and eye protection, during installation.
• If you are unsure about any step of the installation process, it is recommended to seek assistance from a qualified automotive technician.
• Keep small parts away from children to prevent choking hazards.

3. Compatibility

This NISSAN Genuine Outside Mirror Cover (Part No. 96312-6A01H) is compatible with the following NISSAN vehicle models:

• Compatible Vehicle Models: Dayz, Dayz Roox
• Compatible Model Numbers: B21A, B21W
• Compatible Years: June 2013 - March 2015

Important: Vehicle compatibility may vary depending on the specific trim level or grade, even for the same model and year. Always verify compatibility with the manufacturer or a trusted automotive parts specialist before purchasing and attempting installation.

4. Package Contents

The package should contain the following item:

• 1 x NISSAN Genuine Outside Mirror Cover (Part No. 96312-6A01H)

Note: Additional tools or fasteners required for installation are not included and must be acquired separately.

5. Installation (Setup)

This section provides general guidelines for installing an outside mirror cover. Specific steps may vary depending on your vehicle's configuration. Professional installation is recommended.

1. Preparation: Park the vehicle on a level surface, turn off the engine, and engage the parking brake.
2. Access the Mirror: Depending on your vehicle model, you may need to gently pry off the existing mirror cover or remove a few screws to access the mounting points. Refer to your vehicle's service manual for precise instructions.
3. Remove Old Cover: Carefully detach the old mirror cover. Be mindful of any clips or tabs that secure it. Avoid excessive force to prevent damage to the mirror assembly.
4. Install New Cover: Align the new NISSAN Genuine Outside Mirror Cover with the mirror housing. Ensure all clips and tabs are correctly positioned. Gently press the cover into place until it snaps securely.
5. Verify Fitment: Check that the new cover is firmly attached and sits flush with the mirror assembly.

If you encounter any difficulties or resistance during installation, do not force the part. Re-check the compatibility and alignment, or consult a professional.

6. Operation

The NISSAN Genuine Outside Mirror Cover is a passive component and does not require any operational procedures. Once correctly installed, it functions as a protective and aesthetic part of your vehicle's side mirror assembly.

7. Maintenance

To maintain the appearance and longevity of your mirror cover:

• Clean the mirror cover regularly with mild automotive soap and water.
• Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
• Inspect the cover periodically for any signs of damage or loose fitment.

8. Troubleshooting

If you encounter issues with your NISSAN Genuine Outside Mirror Cover:

• Poor Fitment: Double-check the part number against your vehicle's specifications. Ensure all clips and mounting points are correctly aligned and engaged.
• Damage: If the cover arrives damaged or becomes damaged during installation, contact your supplier or the manufacturer for assistance.

For persistent issues, it is advisable to consult a professional automotive technician.

9. Specifications

10. Warranty and Support

For information regarding the warranty of this NISSAN Genuine part, please contact the manufacturer directly. It is important to note that for high-value items, returns or cancellations may not be possible. Please confirm the part number and compatibility before placing your order.

For technical support or further inquiries, please refer to the official NISSAN support channels or consult your authorized NISSAN dealer.