Minuteman Phenom 15 Upright Vacuum Cleaner User Manual

Introduction

Thank you for choosing the Minuteman Phenom 15 Upright Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read this manual thoroughly before operating the unit and retain it for future reference.

The Minuteman Phenom 15 is a lightweight and highly maneuverable upright vacuum designed for commercial and industrial cleaning tasks. It features a dual motor system, durable composite materials, and built-in safety features to ensure reliable performance and user protection.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• Read all instructions before using the appliance.
• Do not leave the appliance when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bag and/or filters in place.

Setup

Unpacking and Initial Assembly

Carefully remove all components from the packaging. Ensure all parts are present before beginning assembly.

1. Place the main vacuum body on a flat, stable surface.
2. Insert the handle assembly into the designated slot on the main body until it clicks securely into place.
3. Attach any included on-board tools (e.g., telescoping wand, hose) to their storage locations on the vacuum.

Figure 1: Fully assembled Minuteman Phenom 15 Upright Vacuum. Note the yellow power cord neatly wrapped around the cord hooks on the handle for storage.

Power Connection

Ensure the vacuum is turned off before plugging it into a power outlet. The Phenom 15 operates on standard electrical power.

• Unwrap the power cord from the cord hooks.
• Plug the power cord into a grounded electrical outlet.

Operating Instructions

Starting the Vacuum

1. Ensure the vacuum is plugged into a suitable power source.
2. Press the power switch, typically located on the main body or handle, to turn the vacuum on.
3. The dual motors will activate, and the brush roll will begin to spin.

Using the On-Board Tools

The Minuteman Phenom 15 includes a telescoping wand, a 4:1 expandable hose, and various on-board tools for versatile cleaning.

• To use the hose and wand, detach them from their storage positions.
• Connect the desired cleaning tool (e.g., crevice tool, upholstery tool) to the end of the wand.
• The vacuum's suction will redirect to the hose for detailed cleaning.

Safety Features

The Phenom 15 is equipped with a safety feature that automatically shuts down the brush motor if a clog occurs. This prevents damage to the motor and belt.

• If the brush motor stops, turn off the vacuum immediately and unplug it.
• Inspect the brush roll and air pathways for obstructions and clear any clogs.
• Once cleared, you can resume operation.

Maintenance

Dust Bag Replacement

Regularly check and replace the dust bag to maintain optimal suction and performance. The Phenom 15 is a bagless unit, but it uses a HEPA filter system that requires periodic cleaning or replacement.

Filter Maintenance (HEPA Filter)

The HEPA filter should be cleaned or replaced according to usage. Refer to the filter compartment for specific instructions on removal and reinstallation.

• Turn off and unplug the vacuum before accessing the filter.
• Locate the filter compartment, usually near the dust collection area.
• Remove the HEPA filter. Tap it gently to remove loose debris, or rinse if washable (check filter instructions).
• Allow filter to air dry completely before reinserting.

Brush Roll Cleaning and Replacement

The brush roll should be inspected regularly for tangled hair or debris. The Phenom 15 features a "No Tool Required Brush Change Out" for convenience.

• Turn off and unplug the vacuum.
• Lay the vacuum flat to access the brush roll area.
• Follow the instructions on the unit to release the brush roll cover.
• Remove any tangled hair or debris from the brush roll.
• If replacement is needed, simply remove the old brush and insert a new one, ensuring it clicks into place.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Minuteman website. Keep your proof of purchase for warranty claims.

If you encounter issues not covered in the troubleshooting section, or require replacement parts, please contact Minuteman customer service.

Note: No official product videos from the seller are available for embedding in this manual.