Satco S9582
Satco S9582 LED Bulb User Manual
Model: S9582
1. Introduction
Thank you for choosing the Satco S9582 LED Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read this manual thoroughly before installation and retain it for future reference.
The Satco S9582 is a 6.5W T9 LED bulb with a clear finish and a medium (E26) base. It emits 800 lumens of warm white light at 2700K and operates on 120V. Designed with a vintage style, it is dimmable and suitable for damp locations, making it versatile for various indoor and outdoor lighting applications.
2. Safety Information
Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or injury to persons.
- WARNING: Risk of electric shock. Disconnect power before installation.
- Do not use with dimmers not specifically designed for LED bulbs. Use only with compatible dimmers.
- Do not use if the bulb or fixture is damaged.
- Ensure the bulb is securely screwed into the socket.
- This bulb is suitable for damp locations but not for direct exposure to water.
- Do not disassemble or modify the bulb.
- Keep out of reach of children.
3. Setup and Installation
Follow these steps for proper installation of your Satco S9582 LED bulb:
- Turn off power: Before replacing any bulb, ensure the power to the fixture is turned off at the circuit breaker or fuse box.
- Allow cooling: If replacing an old incandescent bulb, allow it to cool completely before touching.
- Remove old bulb: Carefully unscrew the old bulb counter-clockwise from the socket.
- Inspect fixture: Check the fixture's socket for any damage or corrosion.
- Install new bulb: Gently screw the Satco S9582 LED bulb clockwise into the medium (E26) base socket until it is snug. Do not overtighten.
- Restore power: Turn the power back on at the circuit breaker.
Figure 3.1: Front view of the Satco S9582 LED Bulb, showing its clear glass and internal LED filaments.
Figure 3.2: Angled view of the Satco S9582 LED Bulb, highlighting its tubular shape and medium base.
4. Operating Instructions
The Satco S9582 LED bulb operates like a standard light bulb once installed. Simply use the light switch connected to the fixture to turn the bulb on or off.
4.1 Dimmable Functionality
This bulb is dimmable, allowing you to adjust the light output to your desired brightness level. For optimal performance and to avoid flickering or buzzing, ensure you use a dimmer switch that is compatible with LED lighting. Consult your dimmer's manual for specific compatibility information.
5. Maintenance
The Satco S9582 LED bulb requires minimal maintenance due to its long lifespan of approximately 15,000 hours.
- Cleaning: Before cleaning, ensure the power to the fixture is off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
- Replacement: Replace the bulb when its light output significantly diminishes or it ceases to function. Follow the installation steps in Section 3 for replacement.
6. Troubleshooting
If you experience issues with your Satco S9582 LED bulb, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, loose connection, faulty bulb. | Check circuit breaker. Ensure bulb is screwed in tightly. Test bulb in another working fixture. |
| Bulb flickers or buzzes. | Incompatible dimmer switch, loose connection. | Ensure dimmer is LED compatible. Tighten bulb. If problem persists, try a different dimmer or use without a dimmer. |
| Light output is too low or too high. | Dimmer setting, incorrect bulb for fixture. | Adjust dimmer setting. Ensure bulb wattage and lumen output are appropriate for your needs. |
If these steps do not resolve the issue, please contact Satco customer support or refer to the warranty information.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | S9582 |
| Brand | Satco |
| Light Type | LED |
| Wattage | 6.5W |
| Incandescent Equivalent | 60W |
| Bulb Base | E26 Medium |
| Light Color | Warm White |
| Color Temperature | 2700K |
| Brightness | 800 Lumens |
| Voltage | 120V |
| Shape | T9 |
| Material | Glass |
| Product Dimensions | 1.13"W x 12"H |
| Average Life | 15,000 Hours |
| Special Features | Dimmable, Damp Location Rated, Rated for Fully Enclosed Fixtures |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| UPC | 045923095825 |
Figure 7.1: Packaging of the Satco S9582 LED Bulb, displaying key specifications and features.
8. Warranty Information
The Satco S9582 LED Bulb comes with a 3-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, accidents, or unauthorized modifications.
For warranty claims or further details, please retain your proof of purchase and contact Satco customer support.
9. Customer Support
If you have any questions, require technical assistance, or need to report an issue with your Satco S9582 LED Bulb, please visit the official Satco website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
For more information, you may visit the Satco Store on Amazon.
Related documentsS9582
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.