1. Safety Information
Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Always follow assembly instructions carefully to prevent instability or collapse.
- Be cautious around sharp edges during handling and assembly.
- Do not exceed the maximum weight capacity of 500 pounds for this bed frame.
- If using with a waterbed, ensure proper support and maintenance to prevent leaks or structural damage.
- Keep small parts away from children to avoid choking hazards.
2. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Side Rails (2)
- Center Cross Supports (3)
- Legs with Glides (7)
- Headboard Mounting Plates (2)
- Hardware Pack (bolts, nuts, washers)
Tools required for assembly (not included): Screwdriver, Pliers.
3. Setup and Assembly
Follow these steps for quick and easy assembly of your Glideaway bed frame.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
- Attach Legs to Side Rails: Each side rail has pre-drilled holes for leg attachment. The T-shaped leg interlocks above and below the side rail for maximum strength. Secure each of the seven legs firmly. Ensure the wide glide foot is oriented correctly to distribute weight evenly.
Image: Frame corner with leg attachment. The wide glide foot is designed for optimal weight distribution.
- Connect Side Rails: Position the two side rails parallel to each other, at the desired width for your Full size mattress.
- Install Center Cross Supports: Attach the three center cross supports between the side rails. These supports provide additional stability and strength for your box spring and mattress.
Image: Center cross support with leg. This component enhances the frame's overall stability.
- Attach Headboard Mounting Plates: If you are using a bolt-on style headboard, attach the included headboard mounting plates to the designated holes at one end of the frame using the provided hardware.
Image: Headboard mounting plate. Use this to securely attach a bolt-on headboard.
- Final Tightening: Once all components are in place, ensure all bolts and connections are securely tightened using a screwdriver and pliers. Do not overtighten.
Image: Fully assembled Glideaway Premium Heavy Duty 7-Leg Bed Frame.
4. Operating (Usage)
This bed frame is designed for use with a Full size box spring and mattress set. It is constructed from high-carbon, recycled railroad steel for exceptional durability and strength.
- Place your Full size box spring directly onto the assembled bed frame.
- Position your Full size mattress on top of the box spring.
- The frame is compatible with bolt-on style headboards only.
- Designed to support heavy applications, including waterbeds and for use by plus-size individuals, within the specified weight capacity.
5. Maintenance
Regular maintenance ensures the longevity and safety of your bed frame.
- Periodically inspect all bolts and connections to ensure they remain tight. Retighten as necessary.
- Check the legs and glides for any signs of wear or damage. Replace if needed.
- Clean the frame with a damp cloth as needed. Avoid harsh chemicals that may damage the finish.
6. Troubleshooting
If you encounter any issues with your bed frame, refer to the following common solutions:
- Squeaking Noises: Squeaking often indicates loose connections. Inspect all bolts and retighten them. Ensure the legs are securely interlocked with the side rails.
- Instability/Wobbling: Verify that all legs are making full contact with the floor and that all connections are tight. Ensure the frame is assembled on a level surface.
- Difficulty Attaching Headboard: Confirm that you are using a bolt-on style headboard and that the headboard mounting plates are correctly installed and aligned.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | B01H2F1Y00 |
| UPC | 702038281573 |
| Size | Full |
| Material | Alloy Steel (High Carbon, Recycled Railroad Steel) |
| Product Dimensions (L x W x H) | 74"L x 9"W x 4"H (Frame dimensions, not mattress area) |
| Height From Floor | 7.5 inches |
| Side Rail Size | 1-1/2" x 1-1/2" Angle Iron |
| Side Rail Length | 70.5 inches |
| Number of Legs | 7 |
| Weight Capacity | Up to 500 pounds |
| Assembly Required | Yes |
| Finish Type | Primed |
| Item Weight | 32 pounds |
8. Warranty
This Glideaway bed frame is backed by a Limited Lifetime Warranty. For specific details regarding warranty coverage and claims, please refer to the warranty documentation included with your purchase or contact Glideaway customer support.
9. Support
For further assistance, technical support, or to inquire about replacement parts, please contact Glideaway customer service through their official website or the contact information provided with your product packaging.
You can also visit the official Glideaway store on Amazon for more product information: Glideaway Store
