OMNIHIL OMNI0006960

OMNIHIL AC Power Cord Instruction Manual

Model: OMNI0006960

Introduction

This manual provides essential information for the safe and effective use of your OMNIHIL AC Power Cord. Please read these instructions carefully before use and retain them for future reference. This power cord is designed for compatibility with various portable projectors, including models from ELEPHAS, Uhappy, Tronfy, Junpro, and ICCKER.

The OMNIHIL AC Power Cord is a high-quality, 5-foot long replacement or spare power cable. It is a 3rd party non-OEM part, certified by UL and RoHS, ensuring safety and environmental compliance.

Safety Information

  • Ensure the power cord is fully inserted into both the device and the power outlet.
  • Do not use the power cord if it is damaged or frayed.
  • Avoid placing heavy objects on the power cord.
  • Keep the power cord away from water and excessive heat.
  • This product does not contain Alkaline, Nickel, NiMH, or Lithium Ion batteries.

Product Overview

The OMNIHIL AC Power Cord features a standard Type B plug for wall outlets and a male-to-female connector gender for device compatibility. It is designed for reliable power delivery to your portable projector.

OMNIHIL AC Power Cord with two-prong connector

Image showing the two-prong connector end of the OMNIHIL AC Power Cord, typically connecting to the device.

OMNIHIL AC Power Cord with standard wall plug

Image showing the standard Type B wall plug end of the OMNIHIL AC Power Cord.

Setup Instructions

  1. Inspect the Cord: Before each use, visually inspect the entire length of the AC power cord for any signs of damage, cuts, or fraying. Do not use if damage is present.
  2. Connect to Device: Locate the power input port on your portable projector. Insert the device-end connector of the OMNIHIL AC Power Cord firmly into this port. Ensure a snug fit.
  3. Connect to Power Outlet: Insert the wall plug end of the AC power cord into a standard, grounded electrical outlet. Ensure the outlet provides the correct voltage for your projector.
  4. Power On: Once both ends are securely connected, you may power on your portable projector according to its specific instructions.

Operating Instructions

The OMNIHIL AC Power Cord is designed for simple plug-and-play operation. Once connected as described in the Setup section, it provides continuous power to your compatible portable projector. No additional operational steps are required for the power cord itself.

  • Ensure the power cord is not kinked or bent sharply during operation.
  • Avoid covering the power cord with carpets or other materials that could trap heat.
  • If the projector loses power unexpectedly, first check the connections of the AC power cord at both the device and the wall outlet.

Maintenance

  • Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or solvents.
  • Storage: When not in use, coil the power cord loosely. Avoid tight coiling or wrapping around sharp objects, which can damage the internal wires. Store in a cool, dry place.
  • Inspection: Periodically inspect the cord for any signs of wear, cuts, or damage. Replace the cord immediately if any damage is found.

Troubleshooting

ProblemPossible CauseSolution
Projector does not power on.Power cord not fully connected.Ensure both ends of the power cord are securely plugged in.
Projector powers off intermittently.Loose connection or damaged cord.Check connections. If problem persists, inspect cord for damage and replace if necessary.
Cord feels warm to the touch.Overload or internal damage.Immediately disconnect the cord. Do not use. Replace with a new, compatible cord.

Specifications

  • Model Number: OMNI0006960
  • Length: 5 feet (approximately 1.5 meters)
  • Connector Type (Wall): Type B (2-prong)
  • Connector Type (Device): Male-to-Female (2-slot)
  • Certifications: UL, RoHS
  • Color: Black
  • Package Dimensions: 7.09 x 3.35 x 1.06 inches
  • Item Weight: 2.46 ounces

Warranty and Support

Warranty: OMNIHIL provides a 5-year free replacement warranty for this AC Power Cord. For warranty claims, please contact OMNIHIL customer support.

Customer Support: For any questions, issues, or support needs regarding your OMNIHIL product, please visit the OMNIHIL store on Amazon or contact their customer service directly. Refer to your purchase documentation for specific contact details.

Note: The image shown on product listings is indicative only. Inconsistencies between the image and the actual product will be governed by the actual product.

Documents - OMNIHIL – OMNI0006960

no relevant documents