Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Gobrico 22-Inch Heavy Duty Full Extension Drawer Slides. These slides are designed for new construction, remodeling, and replacement projects, offering smooth and quiet operation with a soft-close mechanism.
Product Features
- Soft/Self-Closing Mechanism: Ensures drawers close gently and silently.
- Side Mount Design: Suitable for various cabinet and dresser applications.
- High-Grade Material: Constructed from cold-rolled steel with a zinc-plated finish for rust resistance and durability.
- Full Extension: 3-section stretch design allows full access to drawer contents.
- Ball Bearing Operation: Continuous ball bearings provide smooth and quiet performance.
- Heavy Duty Load Capacity: Supports up to 78 pounds (35 KG).
- Quick Release: Features a snap-on design for easy drawer removal.
Image: Zinc-plated surface for enhanced rust and corrosion resistance.
Image: Detail of solid ball bearings for smooth operation and the quick release mechanism for easy drawer removal.
Specifications
| Mounting Type | Side Mount |
| Length | 22 inches (550mm) |
| Thickness | 1/2 inch (12.7mm) |
| Width | 1 3/4 inches (45mm) |
| Load Capacity | 78 Pounds (35 KG) |
| Material | Alloy Steel |
| Finish | Zinc Plated |
| Item Model Number | DSHH32-22A |
| UPC | 709889677579 |
Package Contents
- Drawer Slides (2 pairs / 4 pieces)
- Matching Screws
- Installation Instruction (this document)
Note: Rear-mounted brackets are NOT included and must be purchased separately if required for your installation.
Safety Information
- Always wear appropriate safety gear, such as safety glasses, during installation.
- Ensure the work area is well-lit and clear of obstructions.
- Use the correct tools for each step to prevent damage to the product or injury.
- Do not exceed the maximum load capacity of 78 pounds (35 KG) per pair of slides.
Installation Instructions
Follow these steps for proper installation of your Gobrico drawer slides. It is recommended to have basic carpentry skills and tools for this process.
- Separate the Slide Components: Fully extend the drawer slide. Locate the black plastic release lever. Press the lever and pull the inner rail forward to separate it from the main slide body.
- Attach Inner Rail to Drawer: Position the inner rail flush with the bottom edge of the drawer side. Mark the screw holes. Secure the inner rail to the drawer side using the provided screws. Ensure it is level and straight.
- Attach Outer Rail to Cabinet: Position the main slide body (outer rail) inside the cabinet opening. Ensure it is level and aligned with the desired drawer height. Mark the screw holes. Secure the outer rail to the cabinet side using the provided screws.
- Insert Drawer: Align the inner rail (attached to the drawer) with the main slide body (attached to the cabinet). Gently push the drawer into the cabinet until it clicks into place. Test the drawer for smooth operation and soft closing.
Video: Demonstration of separating the drawer slide components and attaching them to a drawer and cabinet for installation.
Image: Illustrative diagram of drawer slide installation, showing the slide attached to both the drawer and the cabinet.
Image: Examples of Gobrico drawer slides installed in different drawer types, demonstrating full extension and integration.
Usage
The Gobrico drawer slides are designed for smooth and quiet operation. To utilize the full extension feature, simply pull the drawer completely open until it stops. The soft-close mechanism will engage automatically when the drawer is pushed towards the closed position, ensuring a gentle and silent closure.
Image: Noise level comparison, highlighting the quiet operation of the soft-close drawer slides at approximately 25 dB.
Maintenance
- Cleaning: Wipe the slides periodically with a clean, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
- Lubrication: The ball bearings are pre-lubricated. If operation becomes less smooth over time, a small amount of silicone-based lubricant can be applied to the ball bearings. Avoid oil-based lubricants as they can attract dust.
- Inspection: Regularly check screws for tightness and ensure all components are securely attached.
Troubleshooting
- Drawer not closing smoothly: Check for obstructions in the slide mechanism or debris on the ball bearings. Ensure the drawer is not overloaded.
- Drawer not closing completely (soft-close not engaging): Verify that the soft-close mechanism is not damaged and that the drawer is properly aligned.
- Drawer sticking or difficult to open/close: Inspect the slides for any bends or damage. Ensure all mounting screws are tight and the slides are parallel.
- Excessive noise during operation: Clean the slides and apply a small amount of silicone lubricant if necessary. Check for loose components.
If issues persist after troubleshooting, please contact Gobrico customer support.
Warranty and Support
For information regarding product warranty, returns, or to report missing accessories, please contact Gobrico customer service through the retailer's messaging system or visit the official Gobrico website. Please provide your purchase details and model number (DSHH32-22A) for efficient assistance.
