Perlick SC30-18 Underbar Storage Cabinet User Manual

Introduction

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Perlick SC30-18 Underbar Storage Cabinet with Drainboard Top. Please read this manual thoroughly before installation and retain it for future reference.

Safety Information

Always follow basic safety precautions when using this product to reduce the risk of injury or damage. This unit is designed for commercial use and should be installed by qualified personnel.

• Ensure the cabinet is placed on a stable, level surface to prevent tipping.
• Do not overload shelves. Distribute weight evenly.
• Keep the drain clear of obstructions to ensure proper water flow.
• Use appropriate personal protective equipment (PPE) during installation and maintenance.
• Refer to local codes and regulations for installation requirements.

Package Contents

Upon unpacking, verify that all components are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

• Underbar Storage Cabinet with Drainboard Top
• Adjustable Intermediate Shelf
• Stainless Steel Legs with Adjustable Feet (4 units)
• Installation Hardware (if applicable)

Figure 1: Perlick SC30-18 Underbar Storage Cabinet. This image shows the stainless steel cabinet with a perforated drainboard top, a 6-inch backsplash, and an open front with an adjustable intermediate shelf. The unit stands on four stainless steel legs with adjustable feet.

Setup and Installation

1. Unpacking: Carefully remove the cabinet from its packaging. Inspect for any shipping damage. Retain packaging materials until the unit is confirmed to be in working order.
2. Placement: Position the cabinet on a flat, stable surface in its intended location. Ensure adequate space for access and drainage connections.
3. Leg Installation: Attach the four stainless steel legs to the designated mounting points on the cabinet base. Tighten securely.
4. Leveling: Use the adjustable feet on the legs to level the cabinet. A level surface is crucial for proper drainage and stability.
5. Shelf Installation: Insert the adjustable intermediate shelf into the desired position within the open front compartment. Ensure it is securely seated.
6. Drain Connection: Connect the 1-1/2" NPS male drain on the embossed drainboard to a suitable plumbing drain line. Ensure all connections are watertight to prevent leaks.
7. Final Inspection: Before use, perform a final check to ensure all components are correctly assembled and secured, and the drain connection is leak-free.

Operation

The Perlick SC30-18 is designed for efficient underbar storage and drainboard functionality.

• Storage: Utilize the open front compartment and adjustable shelf for storing bar supplies, glassware, or other items. Ensure items are placed securely and do not obstruct the drain.
• Drainboard Use: The embossed drainboard is designed to air-dry glassware or other items, allowing excess water to collect and drain through the 1-1/2" NPS male drain.
• Backsplash: The 6" high backsplash with a 1" return helps protect the wall behind the unit from splashes.

Maintenance and Cleaning

Regular cleaning and maintenance will extend the life and maintain the appearance of your Perlick cabinet.

• Stainless Steel Surfaces: Clean stainless steel surfaces regularly with a mild detergent and warm water. Wipe dry immediately with a soft cloth to prevent water spots. Avoid abrasive cleaners, steel wool, or harsh chemicals that can scratch or damage the finish.
• Drainboard: Periodically clean the embossed drainboard to remove any residue or buildup. Ensure the drain opening is clear of debris to maintain efficient drainage.
• Drain Line: Inspect the drain connection periodically for leaks or blockages. Clear any obstructions as needed.
• Legs and Feet: Check the stability of the legs and adjustable feet regularly. Re-level the unit if necessary.

Troubleshooting

Specifications

• Model: SC30-18
• Dimensions (W x D): 30" x 18-9/16" (76.2 cm x 47.1 cm)
• Backsplash: 6"H with 1" return (15.24 cm H with 2.54 cm return)
• Drain: 1-1/2" NPS Male
• Material: Stainless Steel
• Mounting Type: Floor Mount
• Finish Type: Brushed
• Base Type: Legs with adjustable feet
• Shelf: Adjustable intermediate shelf
• Certifications: NSF
• Brand: Perlick
• Manufacturer: Perlick

Warranty Information

Perlick products are manufactured to high standards. For specific warranty terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Perlick website. Keep your proof of purchase for warranty claims.

Customer Support

If you require assistance, have questions, or need to order replacement parts, please contact Perlick customer support:

• Website: www.perlick.com
• Phone: Refer to the Perlick website for regional contact numbers.