SLLEA USB Charger Cable User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your SLLEA USB Charger Cable. This cable is designed to provide 5V DC power from a standard USB port to compatible Nokia Bluetooth headsets and other devices requiring a 2.0mm/0.5mm DC power plug.

2. Product Overview

The SLLEA USB Charger Cable features a USB Type A male connector on one end and a 2.0mm/0.5mm DC power plug on the other. It is designed for charging compatible devices.

Image 1: The SLLEA USB Charger Cable, showing the USB-A connector and the DC power plug.

• USB Type A Male Connector: Connects to a standard USB power source (e.g., computer USB port, USB wall adapter).
• DC Power Plug (2.0mm/0.5mm): Connects to the charging port of your compatible device. The outer diameter is 2.0mm, and the inner diameter is 0.5mm.
• Cable Length: Approximately 1 meter (3.3 feet).
• Power Output: Up to 5V DC (Positive inside).

Image 2: Close-up view of the USB Type A male connector and the 2.0mm/0.5mm DC power plug.

3. Compatibility

This cable is compatible with various Nokia devices that utilize a 2.0mm/0.5mm DC power input for charging. This includes, but is not limited to, the following Nokia Bluetooth Headset models:

• Nokia BH-904
• Nokia BH-902
• Nokia BH-700
• Nokia BH-700 BT

Additionally, it is compatible with many Nokia cell phone models requiring a 5V DC power supply from a USB port, such as:

• Nokia 1255, 1265, 1315, 1325, 1650
• Nokia 2135, 2310, 2505, 2630, 2760, 2855, 2855i, 2865, 2865I, 2875
• Nokia 3109 classic, 3110 classic, 3155, 3155i, 3250 XpressMusic, 3500 classic
• Nokia 5070, 5200, 5300 XpressMusic, 5310 XpressMusic, 5500, 5500 Sport, 5610 XpressMusic, 5700 XpressMusic
• Nokia 6070, 6080, 6085, 6086, 6088
• Nokia 6101, 6102, 6102I, 6103, 6110 Navigator, 6111, 6120 classic, 6121, 6125, 6126, 6131, 6133, 6136, 6151, 6155, 6155i, 6165, 6165i, 6175i
• Nokia 6234, 6265, 6265i, 6267, 6270, 6275i, 6280, 6282, 6288, 6290
• Nokia 6300, 6500 slide, 6555
• Nokia 7088, 7360, 7370, 7373, 7390, 7500 Prism, 770, 7900
• Nokia 8800 Sirocco
• Nokia E50, E51, E61, E61i, E62, E65, E71, E90, E90 Communicator
• Nokia N70, N70 Music Edition, N71, N72, N73, N73 Music Edition, N75, N76, N80, N80 Internet Edition, N800, N80ie, N81, N81 8 GB, N90, N91, N91 8GB, N92, N93, N93i, N95, N95 8GB

Please verify your device's charging port specifications (2.0mm/0.5mm DC plug, 5V DC input) before use to ensure compatibility.

4. Setup and Usage Instructions

1. Connect to Power Source: Insert the USB Type A male connector of the SLLEA charger cable into a standard USB port. This can be a USB wall adapter, a computer's USB port, a power bank, or any other compatible USB power source. Ensure the power source provides 5V DC output.
2. Connect to Device: Carefully insert the 2.0mm/0.5mm DC power plug into the charging port of your Nokia Bluetooth headset or compatible Nokia device. Ensure the plug is fully seated and secure.
3. Charging Indication: Your device should indicate that it is charging (e.g., an LED indicator light, on-screen display). Refer to your device's specific user manual for charging status indications.
4. Disconnect: Once your device is fully charged, gently remove the DC power plug from your device, then disconnect the USB connector from the power source.

Important:

• Always use a certified USB power adapter or a reliable USB port to prevent damage to your device or the cable.
• Do not force the connectors. If they do not fit easily, check for correct orientation and compatibility.

5. Specifications

6. Maintenance

• Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
• Cleaning: Use a soft, dry cloth to clean the cable and connectors. Do not use liquid cleaners or solvents.
• Handling: Avoid bending or twisting the cable excessively, especially near the connectors, as this can cause internal damage. Always grasp the plug, not the cable, when connecting or disconnecting.
• Inspection: Periodically inspect the cable for any signs of damage, such as frayed wires, exposed conductors, or bent pins. Discontinue use if damage is observed.

7. Troubleshooting

• Device Not Charging:
  • Ensure both the USB connector and the DC plug are fully and securely inserted.
  • Verify that the USB power source is active and providing power (e.g., try another USB port or wall adapter).
  • Confirm that your device is compatible with a 2.0mm/0.5mm DC plug and 5V DC input.
  • Check the cable for any visible damage. If damaged, discontinue use.
• Slow Charging:
  • Ensure the USB power source provides sufficient current for your device. Some devices charge slower on lower-power USB ports (e.g., older computer USB 2.0 ports).
  • Avoid using the device while it is charging, as this can extend charging time.

8. Safety Information

• Do not expose the cable to water, moisture, or extreme temperatures.
• Do not attempt to modify or disassemble the cable.
• Keep out of reach of children.
• Use only with compatible devices and appropriate power sources.
• Disconnect the cable during lightning storms or when unused for long periods.

Image 3: SLLEA's commitment to safety and quality, highlighting RoHS compliance, double insulation, and CE approval for protection against overheating.

9. Support

For further assistance or inquiries, please contact SLLEA customer support. SLLEA is committed to providing:

• After-Sale Support
• Quick Response to inquiries
• Solutions tailored to your needs
• Lifetime Technical Help

Image 4: Visual representation of SLLEA's customer-first support principles.