Introduction
The AEG Leguro bollard light is a compact outdoor floor light designed for small walls, patios, and outdoor areas. It features integrated LEDs for low energy consumption and high light output. This product incorporates a special nano coating for a self-cleaning "lotus effect," where water beads off and carries dirt particles away. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your AEG outdoor pedestal light.
Safety Instructions
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Do not modify the product in any way.
- Keep the product away from flammable materials.
- This product is rated IP54, meaning it is splash-proof. Do not submerge in water.
- Use only the specified voltage (240 Volts AC).
What's in the Box
Verify that all components are present before beginning installation:
- Lamps (Integrated LED)
- Mounting instruction
- All required installation material
Setup and Installation
The Leguro bollard light is designed for easy mounting where a base already exists. Follow the included mounting instructions for detailed steps.
- Preparation: Ensure the installation area is clear and the power supply is off.
- Mounting: Secure the light fixture to the desired surface using the provided installation material. Refer to the detailed mounting instructions for specific drilling and fastening procedures.
- Wiring: Connect the electrical wiring according to the wiring diagram in the mounting instructions. Ensure all connections are secure and insulated. This product operates on 240 Volts AC.
- Final Check: Once installed, ensure the fixture is stable and all connections are properly made before restoring power.
Image: The AEG AEG260005 Outdoor Pedestal Light, featuring an anthracite base and a white illuminated top. This image shows the full height of the light, approximately 50 cm.
Operating Instructions
The AEG Leguro bollard light features integrated LED technology for efficient and durable illumination.
- Power On/Off: The light is controlled by your external power switch connected to the circuit.
- Energy Efficiency: The integrated LEDs provide high light output (504 Lumen) with low energy consumption (7 watts), contributing to energy savings.
- Light Color: The light emits a warm white light with a color temperature of 3300 Kelvin.
Maintenance
The AEG Leguro bollard light is designed for minimal maintenance thanks to its advanced features.
- Cleaning: The special nano coating provides a "lotus effect," causing water to bead off and carry dirt particles with it. This makes the light practically self-cleaning. For stubborn dirt, gently wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- LED Longevity: The integrated LED light source is designed for long-term durability and does not require bulb replacement.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections.
Troubleshooting
If you encounter issues with your AEG Leguro bollard light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; Loose wiring; Faulty switch. | Check circuit breaker/fuse. Ensure all wiring connections are secure. Test the switch. |
| Light flickers. | Unstable power supply; Loose connection. | Verify stable power. Check and tighten all electrical connections. |
| Reduced light output. | Dirt accumulation on diffuser. | Clean the diffuser with a soft, damp cloth. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
| Brand | AEG |
| Model Number | AEG260005 |
| Product Dimensions | 3.15 x 3.15 x 19.69 inches (8 x 8 x 50 cm) |
| Item Weight | 2.5 pounds (1.13 kg) |
| Color | Anthracite/White |
| Material | Aluminum, Plastic |
| Power Source | AC |
| Voltage | 240 Volts |
| Type of Bulb | LED |
| Wattage | 7 watts |
| Luminous Flux | 504 Lumen |
| Color Temperature | 3300 Kelvin |
| IP Protection Class | IP54 (Splash-proof) |
| EU Energy Efficiency Label | A+ |
| Included Components | Lamps, Mounting instruction |
Warranty and Support
AEG products are designed for high quality and durability. For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official AEG website. For technical support or service inquiries, please contact AEG customer service.
You may also consider additional protection plans available for purchase, such as 3-Year or 4-Year Protection Plans, for extended coverage beyond the standard warranty.
