1. Introduction
This manual provides comprehensive instructions for the Nologo START-S3XL universal control board. Designed for 230V AC motors, this unit is compatible with various sliding and swing gate systems, as well as tilt doors and roller shutters. It features a versatile 3-position operation mode and an integrated wireless receiver for remote control. Please read this manual thoroughly before installation and operation to ensure safe and correct usage.
Key features include:
- Single-phase control unit for one 230 VAC motor.
- Suitable for sliding gates, tilt doors, and roller shutters.
- Three low-speed settings with machine learning capability.
- Integrated wireless receiver supporting fixed code and HCS rolling code management.
- Memory capacity for up to 100 different remote controls (unlimited with the same code).
- Operating temperature range: -20°C to +60°C.
- Note: The board supports RF remote controls (433MHz), not wireless controllers.
2. Safety Information
WARNING: Improper installation or use can lead to serious injury or property damage. Always follow these safety guidelines:
- Installation must be performed by qualified personnel in accordance with local electrical codes and regulations.
- Disconnect power before performing any installation, maintenance, or repair work.
- Ensure all wiring connections are secure and properly insulated.
- Do not expose the control board to moisture or extreme temperatures outside the specified operating range.
- Keep children and pets away from moving gates and operating mechanisms.
- Regularly inspect the system for signs of wear or damage.
- Use only original Nologo replacement parts.
3. Product Overview
The Nologo START-S3XL is a compact and robust control board designed for reliable operation of automated gate systems. Its universal compatibility makes it suitable for various motor types and brands operating at 230V AC.
Figure 1: Nologo START-S3XL Universal Control Board. This image shows the compact black control board with various connection terminals and an integrated display, designed for gate automation systems.
3.1. Main Components and Inputs
- Motor Output: For connecting a single 230V AC motor (up to 750W).
- Power Input: 230V AC supply.
- Control Inputs:
- Start Clock: For timed operations.
- Photo Close: Safety input for photocells to prevent closing if an obstruction is detected.
- Open/Close: General command input for gate movement.
- Pedestrian Control: Input for partial opening for pedestrian access.
- Stop: Emergency stop input.
- Integrated Wireless Receiver: For 433MHz RF remote controls.
- Display: LCD for status and programming.
4. Setup and Installation
Before beginning installation, ensure the main power supply is disconnected. Mount the control board in a protected enclosure, away from direct weather exposure and vibrations.
4.1. Wiring Connections
- Power Supply: Connect the 230V AC main power supply to the designated terminals on the control board. Ensure proper grounding.
- Motor Connection: Connect the 230V AC motor wires to the motor output terminals. Refer to your motor's manual for specific wiring diagrams (e.g., common, open, close).
- Safety Devices (Photocells): Connect photocells to the "Photo Close" input. These devices are crucial for safety and must be installed correctly.
- Control Devices: Connect push buttons or key switches for "Open/Close", "Pedestrian Control", and "Stop" functions to their respective inputs.
- Accessories: Connect any additional accessories such as flashing lights or external antennas as per their specific instructions.
4.2. Initial Power-Up and Configuration
After all connections are made and verified, restore power to the control board. The LCD display will illuminate. The board features machine learning for gate travel limits. Follow the on-screen prompts or refer to the detailed programming section (not provided in this general manual) for specific setup procedures, including:
- Automatic learning of gate travel.
- Setting pause times.
- Adjusting motor force and speed (three low-speed settings).
5. Operating Instructions
5.1. Remote Control Programming
The integrated wireless receiver supports 433MHz RF remote controls (fixed code and HCS rolling code). To program a new remote control:
- Access the programming menu on the control board (refer to the detailed programming guide for specific button sequences).
- Select the "Add Remote" option.
- Press the desired button on your new remote control. The board will confirm successful pairing.
- Repeat for additional remotes, up to 100 unique codes.
5.2. Basic Operation
- Open/Close: Press the programmed button on your remote or the wired "Open/Close" button to cycle the gate's movement (open, stop, close, stop).
- Pedestrian Mode: Press the "Pedestrian Control" button for partial gate opening.
- Stop: Press the "Stop" button or the corresponding remote button to immediately halt gate movement.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your Nologo START-S3XL control board and gate system.
- Visual Inspection: Periodically check the control board and wiring for any signs of damage, corrosion, or loose connections.
- Cleanliness: Keep the control board enclosure clean and free from dust, insects, and moisture.
- Safety Devices: Test photocells and other safety devices regularly to ensure they are functioning correctly.
- Power Disconnection: Always disconnect the main power supply before performing any cleaning or inspection inside the control board enclosure.
7. Troubleshooting
If you encounter issues with your Nologo START-S3XL control board, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Gate does not move. | No power, emergency stop engaged, safety device triggered, remote not programmed. | Check power supply. Disengage emergency stop. Check photocells for obstructions. Reprogram remote control. |
| Remote control not working. | Remote battery low, remote not programmed, incorrect frequency. | Replace remote battery. Reprogram remote control. Ensure remote is 433MHz RF. |
| Gate stops unexpectedly. | Obstruction detected by safety devices, motor overheating, power fluctuation. | Clear any obstructions from photocell path. Allow motor to cool down. Check power supply stability. |
| Gate opens partially. | Pedestrian mode activated, travel limits incorrectly set. | Ensure pedestrian mode is not active. Re-learn gate travel limits. |
If the problem persists after attempting these solutions, contact a qualified technician or Nologo customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | START-S3XL |
| Brand | NOLOGO |
| Voltage | 230 Volt AC |
| Motor Power | Up to 750W |
| Dimensions (L x W x H) | 87L x 12.6W cm (87 x 126 x 40 mm) |
| Weight | 500 Grams |
| Material | Plastic |
| Operating Temperature | -20°C to +60°C |
| Wireless Receiver Frequency | 433MHz RF |
| Remote Control Memory | 100 unique remotes (unlimited with same code) |
| Included Components | 1 x START-S3XL Control Board |
| UPC | 656272815134 |
9. Warranty Information
Specific warranty details for the Nologo START-S3XL control board are not provided in the product information. Please refer to your purchase documentation or contact the retailer/manufacturer directly for warranty terms and conditions.
10. Customer Support
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Nologo START-S3XL control board, please contact your authorized Nologo dealer or the point of purchase. Keep your product model number (START-S3XL) and purchase date available when contacting support.