Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your Philips 49022 Embrace Wall Lamp. Please read this manual thoroughly before installation and retain it for future reference.
The Philips 49022 Embrace Wall Lamp is designed for indoor use, offering a modern lighting solution for various rooms such as homes, offices, studies, living rooms, and bedrooms. It features a synthetic white finish and a convenient on-base switch.
Important Safety Instructions
- Always disconnect power before installation, cleaning, or servicing.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Ensure the mounting surface can support the weight of the fixture.
- Do not exceed the specified voltage (240 Volts).
- Use only the specified light source type (Incandescent).
- Keep away from water and moisture. This product is for indoor use only.
- Do not attempt to modify the fixture.
Setup and Installation
The Philips 49022 Embrace Wall Lamp is designed for flush mount installation. Ensure you have the necessary tools and follow these steps carefully.
Package Contents:
- 1 x Philips 49022 Embrace Wall Lamp
Tools Required (Not Included):
- Screwdriver
- Wire strippers
- Drill (if required for mounting)
- Pencil
- Measuring tape
Installation Steps:
- Turn off Power: Before starting any electrical work, ensure the main power supply to the installation area is turned off at the circuit breaker.
- Prepare Mounting Surface: Identify the desired location for the wall lamp. Ensure it is a stable surface capable of supporting the lamp's weight (approximately 500 grams).
- Mounting Bracket Installation: Attach the lamp's mounting bracket to the wall using appropriate screws and anchors (not included, typically supplied with the lamp or purchased separately).
- Electrical Connection: Connect the household electrical wires to the lamp's wires. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Ensure all connections are secure and insulated with wire nuts.
- Secure the Lamp: Carefully attach the lamp fixture to the mounting bracket, ensuring all wires are tucked safely inside the junction box or fixture base.
- Install Light Source: Insert the appropriate incandescent light bulb (not included) into the lamp socket.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
- Test Functionality: Use the on-base switch to turn the lamp on and off to confirm proper operation.
Operating Instructions
The Philips 49022 Embrace Wall Lamp is designed for simple operation.
- Power On/Off: Locate the convenient on-base switch on the lamp fixture.
- Toggle Switch: Press the switch to turn the lamp ON. Press it again to turn the lamp OFF.
No complex controls or settings are required for this fixture.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Philips 49022 Embrace Wall Lamp.
- Cleaning:
- Always disconnect power before cleaning.
- Wipe the lamp with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement:
- Ensure the lamp is turned off and cool before attempting to replace the bulb.
- Unscrew the old bulb counter-clockwise.
- Screw in a new incandescent bulb of the correct wattage and type (as specified for the fixture) clockwise until snug.
- Inspection: Periodically inspect the lamp for any signs of damage to the wiring or fixture. If damage is found, discontinue use and consult a qualified electrician.
Troubleshooting
If you encounter issues with your Philips 49022 Embrace Wall Lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Lamp flickers. |
|
|
| Lamp makes buzzing noise. |
|
|
If the problem persists after attempting these solutions, contact Philips customer support or a qualified electrician.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | PHILIPS |
| Model Number | 49022 Embrace |
| ASIN | B01GE0FDH4 |
| Color | White |
| Material | Synthetic |
| Style | Modern |
| Light Fixture Form | Wall |
| Room Type | Home, Office, Study, Living, Bedroom |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Flush Mount |
| Light Source Type | Incandescent |
| Voltage | 240 Volts |
| Included Components | 1 Wall Lamp |
| Item Weight | 500 Grams |
| Controller Type | Push Button (On-base switch) |
| Dimensions (LxWxH) | 11.3 cm x 16.3 cm x 21.3 cm |
Warranty and Support
Warranty: The Philips 49022 Embrace Wall Lamp comes with a 1-year warranty on the product from the date of invoice. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or further assistance, please contact Philips customer service through their official website or the contact information provided with your purchase documentation.
