Introduction
This manual provides instructions for the installation, operation, and maintenance of your Home Decorators Collection Alberson 4-Light Brushed Nickel LED Bath Bar Light. This LED vanity light features frosted acrylic diffusers and a brushed nickel frame. It is designed for indoor use in bathroom settings.
Image: Front view of the Alberson 4-Light Brushed Nickel LED Bath Bar Light.
Safety Information
- Always turn off the main power supply at the circuit breaker before beginning installation or performing any maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are made in accordance with local codes and ordinances.
- Do not install this fixture in wet locations. It is rated for indoor use only.
- Handle the fixture with care to avoid damage to the LED components or acrylic diffusers.
Package Contents
Verify that all parts are included before beginning installation:
- Alberson 4-Light LED Bath Bar Light Fixture
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual
Installation (Setup)
This fixture is designed for semi-flush wall mount installation and is hardwired. Hardware is included for easy installation.
- Prepare for Installation: Turn off power at the circuit breaker. Ensure the power is completely off before proceeding.
- Remove Old Fixture (if applicable): Carefully disconnect and remove any existing light fixture.
- Attach Mounting Plate: Secure the mounting plate to the junction box in the wall using the provided screws. Ensure it is firmly attached.
- Make Electrical Connections:
- Connect the fixture's black wire to the house's black (hot) wire.
- Connect the fixture's white wire to the house's white (neutral) wire.
- Connect the fixture's ground wire to the house's ground wire (usually bare copper or green).
- Secure all connections with wire nuts and electrical tape.
- Mount the Fixture: Carefully align the fixture with the mounting plate and secure it using the provided screws. Ensure the fixture is flush against the wall.
- Restore Power: Turn the power back on at the circuit breaker.
Image: Side view of the Alberson 4-Light fixture, showing its profile against a wall.
Image: Diagram showing the dimensions of the Alberson 4-Light fixture: 24 inches wide and 5.25 inches high.
Operating Instructions
The Alberson 4-Light LED Bath Bar Light is operated via a standard wall switch (toggle type) or a remote control, if integrated into your home's smart system.
- Turning On/Off: Use the wall switch connected to the fixture to turn the light on or off.
- Remote Control: If you have a compatible remote control system, refer to its specific instructions for pairing and operation.
Image: The Alberson 4-Light fixture with its LED lights illuminated, showcasing the warm white glow.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your light fixture.
- Cleaning: To clean the fixture, turn off the power and wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or acrylic diffusers.
- LED Lifespan: The integrated LED light source is designed for long-term use and does not require bulb replacement.
Troubleshooting
If your light fixture is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
If troubleshooting steps do not resolve the issue, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Home Decorators Collection |
| Model Number | 28025-HBU |
| Color | Brushed Nickel |
| Material | Acrylic |
| Light Source | Integrated LED |
| Number of Light Sources | 4 |
| Voltage | 120 Volts |
| Light Color | Warm White (3000K) |
| Wattage | 20 watts |
| Brightness | 1400 Lumens |
| Efficiency | 70 Lumens per Watt |
| Mounting Type | Wall Mount |
| Installation Type | Semi Flush Mount |
| Dimensions (W x H x D) | 24 in x 5.25 in x 3 in |
| Item Weight | 7 Pounds |
| Certification | ETL Listed |
| Required Assembly | No |
Warranty Information
Specific warranty details for this product are not provided in the available information. Please refer to the product packaging or contact the manufacturer directly for warranty terms and conditions.
Customer Support
For technical assistance, replacement parts, or further inquiries, please contact Home Decorators Collection customer service.
- Website: Home Decorators Collection Official Website (Note: This link is to Home Depot's brand page as the manufacturer is "Home Decorators Collection" and often sold through Home Depot)
- Phone: Refer to the product packaging or manufacturer's website for current contact numbers.