iLiving 16-Inch Wall Mounted Exhaust Fan (Model ILG8SF16V) Instruction Manual

1. Product Overview

The iLiving 16-inch Wall Mounted Exhaust Fan is designed to provide efficient ventilation for various spaces such as homes, attics, garages, and sheds. This model features an automatic shutter system, a heavy-duty galvanized steel frame, and weather-resistant aluminum shutters and blades. The motor is thermally protected and permanently lubricated for durability and quiet operation. This fan is UL Listed, ensuring compliance with safety standards.

This fan is a 16-inch 'Fan-only' model. Variable speed functionality is available when used with a compatible speed controller (sold separately).

2. Safety Information

• Always disconnect power before installing, servicing, or cleaning the fan.
• Installation requires electrical hardwiring. If you are not experienced with electrical wiring, consult a qualified electrician.
• Ensure the fan is securely mounted to a stable surface to prevent vibration and potential hazards.
• Keep hands, clothing, and other objects away from moving parts during operation.
• Do not operate the fan with damaged wiring or if the fan itself is damaged.
• This fan is designed for indoor use in environments such as barns, bathrooms, garages, greenhouses, and warehouses.

3. Package Contents

• iLiving 16-inch Wall Mounted Exhaust Fan (Model ILG8SF16V)
• User Manual

4. Setup & Installation

The iLiving 16-inch Wall Mounted Exhaust Fan comes fully assembled. Installation primarily involves mounting the unit and completing the electrical hardwiring. Refer to the diagrams below for precise dimensions and mounting hole locations.

4.1. Mounting

A square opening of 17 inches is recommended for installation. The fan's overall dimensions are approximately 19 inches (width) x 19 inches (height) x 5.75 inches (depth). Use appropriate fasteners to secure the fan to the wall through the designated mounting holes.

Figure 1: Detailed dimensions and specifications for the iLiving 16-inch exhaust fan. Note the 17-inch square opening requirement.

4.2. Electrical Hardwiring

The fan requires hardwiring to a 115 Volt power source. Ensure all electrical connections comply with local electrical codes and safety regulations. If a variable speed controller (iLIVING ILG8SFSC, sold separately) is to be used, refer to its specific wiring instructions.

5. Operating Instructions

The iLiving 16-inch Wall Mounted Exhaust Fan operates upon receiving power. The automatic shutters open when the fan is active and close when it is off, preventing drafts and debris entry.

5.1. Variable Speed Control (Optional)

For models with variable speed functionality, an iLIVING ILG8SFSC speed controller (sold separately) is required. This controller allows you to adjust the fan's speed to customize airflow and noise levels. Refer to the controller's manual for specific operating instructions.

Figure 2: The iLiving Smart Remote Programmable All-in-One Controller (ILG8SFRC), sold separately, offers timer, humidistat, thermostat, and speed control functions.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your iLiving exhaust fan.

• Cleaning: Periodically clean the fan blades and shutters to remove dust and debris. Ensure power is disconnected before cleaning. Use a soft cloth and mild detergent if necessary.
• Motor: The motor is permanently lubricated and thermally protected, requiring no additional lubrication under normal operating conditions.
• Inspection: Annually inspect the fan for any signs of wear, loose connections, or damage to the wiring or housing.

7. Troubleshooting

If you encounter issues with your iLiving exhaust fan, refer to the following common troubleshooting steps:

• Fan Not Turning On:
  • Check the power supply to ensure the fan is receiving electricity.
  • Verify all electrical connections are secure.
  • If using a separate controller, ensure it is properly connected and set.
• Reduced Airflow:
  • Inspect fan blades and shutters for accumulated dust or obstructions. Clean as necessary.
  • Ensure the fan is operating at the desired speed if a controller is in use.
• Unusual Noise or Vibration:
  • Check for loose mounting hardware and tighten if needed.
  • Inspect fan blades for damage or imbalance.
  • Ensure no foreign objects are interfering with the fan's operation.
• Shutters Not Opening/Closing:
  • Check for obstructions preventing the shutters from moving freely.
  • Ensure the fan is receiving power and operating correctly.

If problems persist after attempting these steps, contact iLiving customer support.

8. Specifications

9. Warranty Information

The iLiving 16-inch Wall Mounted Exhaust Fan (Model ILG8SF16V) comes with a 1-Year Limited Components Warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or contact iLiving customer support.

10. Customer Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact iLiving customer support. Have your product model number (ILG8SF16V) and purchase information ready when contacting support.

iLiving USA
Contact information can typically be found on the manufacturer's website or on the product packaging.