ENERWAVE Z-Wave Plus Relay (ZWN-RSM1-PLUS) Instruction Manual

Product Overview

The ENERWAVE ZWN-RSM1-PLUS Z-Wave Plus Relay utilizes advanced Z-Wave technology to provide faster operation, improved RF coverage, and easier installation for your home automation system. This module is designed to be installed and "hidden" behind an existing ON/OFF switch, transforming it into a wirelessly controllable smart switch. It allows you to control connected loads (lights, fans) remotely via a Z-Wave APP on your mobile device. The ZWN-RSM1-PLUS acts as a Z-Wave repeater, extending the signal range up to 100ft, ensuring reliable communication throughout your network. A Z-Wave hub is required to control this device.

Key Features

• Z-Wave Micro Switch: Installs behind an existing wall switch to upgrade it into a Z-Wave switch, preserving your original switch's appearance and functionality.
• Wireless Control: Remotely control appliances such as lights and fans from an internet-connected smartphone, tablet, or computer.
• Z-Wave Plus Technology: Features improved battery life, extended wireless range, and increased bandwidth for enhanced performance.
• Z-Wave Repeater: Extends the range of your Z-Wave signal up to 100ft, ensuring the switch remains functional even if the module fails.
• Compatibility: Works with Alexa (Z-Wave hub and neutral wire required).
• Electrical Specifications: Single Pole, 120-277 VAC, 50/60Hz, 10A Maximum Load, 908.42MHz.
• Compact Design: Slim dimensions of 1.63" x 1.63" x 0.82" for easy installation within junction boxes.
• Certifications: FCC and ETL listed.

Figure 1: Overview of the Enerwave Z-Wave Plus Relay's key features.

What's in the Box

• 1 x Z-Wave Relay (ZWN-RSM1-PLUS)
• 1 x Instruction Manual

Specifications

Setup & Installation

Important Safety Information: Installation should only be performed by a qualified electrician or trained personnel. Ensure power is turned OFF at the circuit breaker before beginning any electrical work. A neutral wire is required for this device to function correctly.

For detailed installation instructions, please refer to the official Installation Manual PDF provided by the manufacturer: ENERWAVE ZWN-RSM1-PLUS Installation Manual (PDF).

Wiring Diagram Overview

The ZWN-RSM1-PLUS module connects to your existing electrical wiring. It requires connections for Neutral, Hot (Line), Load, and an Auxiliary (Aux) wire for the existing switch. Ensure all connections are secure and follow local electrical codes.

Figure 2: Wiring terminals on the ZWN-RSM1-PLUS module. A neutral wire is required.

Installation Behind Existing Switch

The compact design of the ZWN-RSM1-PLUS allows it to be installed directly behind your existing wall switch within the junction box. This enables you to retain the aesthetic of your current switches while adding smart control capabilities.

Figure 3: The ZWN-RSM1-PLUS module is designed to fit discreetly behind your existing wall switch.

Pairing with a Z-Wave Hub

Once physically installed, the ZWN-RSM1-PLUS needs to be paired with a compatible Z-Wave hub (sold separately). Follow your Z-Wave hub's instructions for adding new devices. Typically, this involves putting the hub into inclusion mode and then activating the pairing sequence on the ZWN-RSM1-PLUS module (refer to the full manual for specific button presses).

Figure 4: The ZWN-RSM1-PLUS integrates with Z-Wave gateway hubs and voice assistants like Amazon Echo.

Operating Instructions

Remote Control via Z-Wave App

After successful pairing with your Z-Wave hub, you can control the connected lights or fans from anywhere using your Z-Wave hub's mobile application. This allows for convenient ON/OFF control, scheduling, and integration into smart home scenes.

Figure 5: Control your lights and fans remotely using your Z-Wave enabled smartphone application.

Voice Control with Amazon Alexa

The ZWN-RSM1-PLUS is compatible with Amazon Alexa when connected through a compatible Z-Wave hub. This enables hands-free control of your lights and fans using voice commands.

Maintenance

The ENERWAVE ZWN-RSM1-PLUS is designed for long-term, maintenance-free operation. No user-serviceable parts are inside. To clean the device, ensure power is off at the circuit breaker and wipe with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.

Troubleshooting

• Device Not Responding:
  • Verify that the ZWN-RSM1-PLUS is properly wired and receiving power.
  • Ensure your Z-Wave hub is powered on and functioning correctly.
  • Check the distance between the module and the Z-Wave hub or nearest repeater. Obstacles can reduce signal strength.
  • Attempt to re-pair the device with your Z-Wave hub.
• Physical Switch Not Working:
  • Confirm the auxiliary (Aux) wire connection from the module to the physical switch is correct.
  • Ensure the physical switch itself is in good working order.
• Interference Issues:
  • Other wireless devices operating on similar frequencies may cause interference. Try relocating the Z-Wave hub or other devices if possible.

If issues persist, consult the comprehensive troubleshooting section in the full Installation Manual or contact Enerlites customer support.

Warranty & Support

The ENERWAVE ZWN-RSM1-PLUS comes with a 1-year warranty from the date of purchase, covering defects in materials and workmanship. For warranty claims or technical support, please contact Enerlites customer service.

For additional information, detailed wiring diagrams, and advanced configurations, please refer to the complete user guide available online: Official ENERWAVE ZWN-RSM1-PLUS User Guide (PDF).