1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Kimpex Heated Grip with Thumb Kits, Model 365137. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: Kimpex Heated Grip with Thumb Kits, showing the grips, wiring, and control unit.
2. Product Overview
The Kimpex Heated Grip with Thumb Kits are designed to provide warmth and comfort during cold weather riding. Featuring multiple heat levels and a dedicated thumb warmer, these grips enhance the riding experience by maintaining hand warmth.
3. Package Contents
Verify that all components are present in your package:
- Heated Grips (Left and Right)
- Thumb Warmer
- Wiring Harness with Integrated Controller
- Mounting Accessories (e.g., adhesive pads, zip ties)
4. Specifications
| Heat Levels | 5 levels |
| Mounting Type | Push in handlebar |
| Color | Black |
| Thumb Warmer Included | Yes |
| Fits Handlebar Diameter | 7/8" |
| Model Number | 365137 |
5. Setup and Installation
Proper installation is crucial for the safe and effective operation of your heated grips. If you are unsure about any steps, consult a qualified technician.
5.1 General Installation Steps
- Remove existing grips from the handlebars.
- Clean the handlebar surface thoroughly.
- Slide the new heated grips onto the handlebars. Ensure a snug fit.
- Connect the wiring harness to the grips and the thumb warmer.
- Connect the main power wires to a 12V power source (e.g., vehicle battery), ensuring proper polarity (red to positive, black to negative). It is recommended to connect through a switched power source to prevent battery drain when the vehicle is off.
- Secure all wiring to prevent interference with moving parts and protect from damage.
- Mount the control unit in an easily accessible location on your vehicle.
5.2 Installation Video Guides
Video: This video demonstrates the components and connection process for 7/8'' handlebar heated grips on a motorcycle.
Video: This video illustrates the installation of 7/8" heated grips with a thumb warmer for a 12V ATV, highlighting the adjustable grip and thumb heating function.
6. Operation
The heated grips feature a control unit with a pushing LED light button to manage heat levels. To operate:
- Power On: Press and hold the power button on the control unit for a few seconds until the LED illuminates.
- Adjust Heat Level: Briefly press the power button to cycle through the 5 available heat levels. The LED indicator will change to reflect the current setting.
- Power Off: Press and hold the power button again for a few seconds until the LED turns off.
The thumb warmer operates in conjunction with the grips, providing consistent warmth to the thumb area.
7. Maintenance
To ensure longevity and optimal performance of your heated grips:
- Regularly inspect wiring for any signs of wear, fraying, or damage.
- Keep the grips and control unit clean. Use a damp cloth to wipe away dirt and debris. Avoid harsh chemicals.
- Ensure all connections remain secure.
- If the vehicle is stored for an extended period, disconnect the grips from the power source to prevent battery drain.
8. Troubleshooting
If you encounter issues with your heated grips, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Grips not heating | No power, loose connection, blown fuse | Check power connection to battery, inspect wiring for looseness, check and replace fuse if necessary. |
| Uneven heating (one grip hotter than other) | Internal wiring issue, grip damage | Inspect grips for external damage. If issue persists, contact customer support. |
| Grips turn off unexpectedly | Overheating protection, low battery voltage | Reduce heat level. Check vehicle battery voltage. Ensure proper ventilation around grips. |
If troubleshooting steps do not resolve the issue, contact Kimpex customer support for further assistance.
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Kimpex website. Keep your proof of purchase for warranty claims.