1. Product Overview
The Diversitech FF-250-UNI Hef-T-Foot is a universal support designed to provide stable elevation and support for various equipment. Its robust construction ensures durability and reliable performance in diverse applications.
Key features include:
- Made in Viet Nam
- Package length: 9.75 inches
- Package width: 7.25 inches
- Package height: 4.0 inches

Figure 1: The Diversitech FF-250-UNI Hef-T-Foot. This image displays the black, durable construction of the support foot, highlighting its design and the embossed manufacturer details on its surface.
2. Setup Instructions
Proper setup of the Hef-T-Foot is crucial for stability and performance. Follow these steps for installation:
- Site Preparation: Ensure the surface where the Hef-T-Foot will be placed is level, clean, and capable of supporting the combined weight of the foot and the equipment.
- Placement: Position the Hef-T-Foot directly under the equipment requiring support. For multiple feet, ensure even distribution of weight and proper alignment.
- Equipment Mounting: Carefully lower the equipment onto the raised central section of the Hef-T-Foot. Ensure the equipment is stable and centered.
- Securing (Optional): If the equipment or application requires additional stability, consider using appropriate fasteners or adhesives to secure the equipment to the Hef-T-Foot, or the Hef-T-Foot to the ground, as per local building codes and safety standards.
Note: Always consult the installation guidelines of the equipment being supported for specific requirements.
3. Operating Guidelines
The Diversitech FF-250-UNI Hef-T-Foot is a passive support component. Once installed, its primary function is to provide a stable, elevated base for equipment, protecting it from ground contact and facilitating air circulation or drainage.
- Ensure the supported equipment remains balanced and does not exert excessive uneven pressure on the foot.
- Avoid placing loads exceeding the specified weight capacity (refer to Specifications section).
- Do not use the Hef-T-Foot as a step or for purposes other than its intended use as an equipment support.
4. Maintenance
The Hef-T-Foot requires minimal maintenance due to its durable construction. However, periodic checks are recommended to ensure continued optimal performance:
- Visual Inspection: Regularly inspect the Hef-T-Foot for any signs of wear, cracking, or damage, especially after extreme weather conditions.
- Stability Check: Periodically verify the stability of the supported equipment and the Hef-T-Foot itself. Ensure there is no wobbling or shifting.
- Cleaning: If necessary, clean the Hef-T-Foot with mild soap and water to remove dirt or debris. Avoid harsh chemicals that could degrade the material.
If any significant damage is observed, replace the Hef-T-Foot immediately to prevent equipment instability or failure.
5. Troubleshooting
This section addresses common issues that may arise with the Hef-T-Foot.
| Problem | Possible Cause | Solution |
|---|---|---|
| Equipment is unstable or wobbles. | Uneven ground surface; improper placement of equipment; damaged Hef-T-Foot. | Ensure ground is level. Re-center equipment on the foot. Inspect foot for damage and replace if necessary. |
| Hef-T-Foot appears to be sinking. | Soft or unstable ground; excessive load. | Reinforce the ground surface. Verify load does not exceed capacity. Consider using a larger base plate if ground is consistently soft. |
| Visible cracks or deformation on the foot. | Material fatigue; impact damage; excessive load. | Immediately replace the damaged Hef-T-Foot. Ensure future loads are within specifications. |
6. Specifications
Detailed specifications for the Diversitech FF-250-UNI Hef-T-Foot:
| Attribute | Detail |
|---|---|
| Manufacturer | Diversitech |
| Part Number | FF-250-UNI |
| Item Weight | 6.6 pounds |
| Product Dimensions | 9.75 x 7.25 x 4 inches |
| Country of Origin | Vietnam |
| Item Model Number | FF-250-UNI |
| Color | Black |
| Item Package Quantity | 1 |
| Included Components | pipe-supports |
| Batteries Required? | No |
| ASIN | B01FXVI58O |
| Date First Available | May 20, 2016 |