Introduction
The Diversitech WM1002 Alpha Numeric Cable Marker Book is designed for efficient and durable cable identification. This product provides a convenient way to mark cables with alpha-numeric characters, ensuring clear and lasting organization. It is a highly durable hardware product, manufactured in the United States.
Setup
The WM1002 cable marker book requires minimal setup. Upon receiving the product, ensure the book is intact and all marker sheets are present. No assembly or special tools are required for initial use.
- Unpack the cable marker book from its packaging.
- Familiarize yourself with the layout of the alpha-numeric markers within the book.
- Store the book in a clean, dry environment until ready for use.
Operating Instructions
Follow these steps to effectively use the Diversitech WM1002 cable markers:
- Identify the Cable: Determine which cable needs to be marked and the specific alpha-numeric identifier required.
- Select the Marker: Open the WM1002 book and locate the desired character or number marker. The markers are pre-printed for convenience.
- Peel the Marker: Carefully peel the individual marker from its backing sheet. Avoid touching the adhesive side to maintain optimal stickiness.
- Apply the Marker: Wrap the marker around the cable at the desired location. Ensure the marker adheres firmly to the cable surface. For best results, apply to clean, dry cable surfaces.
- Secure (Optional): For added security or in high-movement environments, consider using a clear heat-shrink tubing or cable tie over the marker to protect it.
The markers are designed for long-lasting wear and clear visibility.
Maintenance
To ensure the longevity and usability of your Diversitech WM1002 Cable Marker Book, observe the following maintenance guidelines:
- Storage: Store the book in a cool, dry place away from direct sunlight and extreme temperatures. This helps preserve the adhesive quality of the markers.
- Cleanliness: Keep the book free from dust, dirt, and moisture. Contaminants can affect the adhesive and legibility of the markers.
- Handling: Handle the book with care to prevent bending or creasing of the marker sheets, which could damage the individual markers.
Troubleshooting
This section addresses common issues you might encounter with the WM1002 cable markers.
| Problem | Possible Cause | Solution |
|---|---|---|
| Marker not adhering well. | Cable surface is dirty, oily, or wet. Marker adhesive touched during peeling. | Clean and dry the cable surface thoroughly before application. Handle markers by the edges. |
| Marker peeling off over time. | Improper application. Extreme environmental conditions. | Ensure firm application. Consider using additional protective measures like heat-shrink tubing for harsh environments. |
| Characters are difficult to read. | Poor lighting. Marker obscured by dirt. | Ensure adequate lighting. Clean the marker surface if it becomes dirty. |
Specifications
Key specifications for the Diversitech WM1002 Alpha Numeric Cable Marker Book:
- Model Number: WM1002
- Manufacturer: Diversitech
- Item Weight: 3.2 ounces
- Product Dimensions: 7.5 x 4 x 0.25 inches
- Included Components: Cable-ties, Fasteners & Hooks (as per product specifications, though the primary product is the marker book itself)
- Batteries Required: No
- Product Category: Hardware
- Origin: Made in United States
Warranty and Support
For information regarding product warranty or technical support, please contact Diversitech directly or visit their official website. The product is designed for durability and performance.
You can find more information about Diversitech products and support on their Amazon Brand Store: Diversitech Store.
