Product Overview
The Performance Tool W50063 600W Garage/Shop Handheld Blower is designed for efficient clearing of debris from various surfaces. Its compact and lightweight design makes it easy to handle, while delivering powerful airflow suitable for garage floors, sidewalks, and other areas. This versatile tool can also be used for clearing dust and sawdust from power tools or for touch-less drying applications.
Figure 1: Performance Tool W50063 Handheld Blower with standard nozzle.
Included Components
Before beginning assembly or operation, ensure all components are present:
- Blower Unit
- Blowing Connector
- On/Off Switch (integrated)
- Locking Button (integrated)
- Suction Connector
- Collection Bag
- Carbon Brush (for maintenance)
- Nozzle Retaining Ring
Figure 2: Exploded view of the W50063 Blower components.
Setup
The Performance Tool W50063 Blower is designed for quick and easy setup. Follow these steps to prepare your blower for use:
- Attach Nozzle: For blowing applications, firmly attach the Blowing Connector (nozzle) to the front outlet of the blower unit. Ensure it is secured with the Nozzle Retaining Ring if provided, or by twisting until it locks into place.
- Attach Collection Bag (for vacuum function): If using the vacuum function, attach the Suction Connector to the main air intake port (usually the side where air is drawn in) and then attach the Collection Bag to the Suction Connector.
- Power Connection: Connect the blower's power cord to a standard 120V AC, 60Hz electrical outlet. An extension cord may be necessary depending on your work area, as the integrated cord is compact.
Figure 3: The compact size of the blower allows for easy handling.
Figure 4: Blower configured with the collection bag for vacuuming debris.
Operating Instructions
The W50063 Blower is simple to operate. Always ensure you are wearing appropriate safety gear, such as eye protection, before operating the tool.
- Starting the Blower: With the unit plugged in, press the On/Off Switch located on the handle. The blower will immediately start.
- Continuous Operation: To maintain continuous operation without holding the trigger, press the Locking Button while the On/Off Switch is engaged. Release the Locking Button to stop continuous operation.
- Blowing Applications: Direct the nozzle towards the debris you wish to clear. The 600W motor provides 75+ mph air flow and 16,000 max RPM, making it effective for clearing garage floors, sidewalks, and light yard debris.
- Vacuum Applications: When configured for vacuuming, hold the unit with the suction port facing the debris. The collection bag will capture the material.
- Shutting Down: Release the On/Off Switch or the Locking Button (if engaged) to turn off the blower. Unplug the unit from the power outlet after use.
Figure 5: Efficiently clearing sawdust from power tools.
Figure 6: Ideal for light outdoor clearing tasks like leaves.
Figure 7: The blower can be used for touch-less drying of vehicles.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your blower.
- Cleaning: After each use, wipe down the exterior of the blower with a clean, damp cloth. Ensure air vents are free from debris to prevent overheating.
- Collection Bag: Empty the collection bag regularly when using the vacuum function to maintain suction efficiency. Clean the bag as needed.
- Carbon Brushes: The blower uses carbon brushes. Periodically inspect the carbon brushes for wear. Replace them when they are worn down to approximately 1/4 inch (6mm) or if the motor performance decreases significantly. Refer to the "W50063 Breakdown" diagram for the location of the carbon brush access.
- Storage: Store the blower in a clean, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your Performance Tool W50063 Blower, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blower does not start | Not plugged in; Power outlet issue; Damaged cord; Internal fault. | Ensure plug is fully inserted. Test outlet with another device. Inspect cord for damage. If damaged, seek professional repair. |
| Low airflow/suction | Blocked nozzle/intake; Full collection bag; Worn carbon brushes. | Clear any obstructions from nozzle or intake. Empty and clean collection bag. Inspect and replace carbon brushes if worn. |
| Unusual noise or vibration | Debris inside housing; Loose components; Worn motor bearings. | Immediately turn off and unplug. Check for debris in air vents. If problem persists, discontinue use and contact customer support. |
| Overheating | Blocked air vents; Prolonged heavy use. | Ensure air vents are clear. Allow blower to cool down. Avoid continuous heavy use for extended periods. |
For issues not listed above or if solutions do not resolve the problem, please contact Performance Tool customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Performance Tool |
| Model Name | Single Speed Compact Red 600 Watt Garage Blower |
| Item Model Number | W50064 |
| Power Source | AC |
| Voltage | 120 V AC, 60Hz |
| Rated Power | 600W, 5 AMPs |
| Speed (RPM) | 16,000 max. |
| Air Flow Rate | 75 CFM (Cubic Feet per Minute) |
| Air Speed | 75+ mph |
| Bag Capacity | 20 oz. |
| Item Weight | 3.3 lbs (3.21 pounds) |
| Product Dimensions | 7.4 x 7.4 x 9.3 inches |
| Noise Rating | 98 db(A) |
| Certifications | cETL listed 4008076 |
| Color | Red |
| Form Factor | Handheld |
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please contact Performance Tool directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Protection plans may be available for extended coverage. Please refer to your retailer for details on available protection plans.
For general inquiries or to find more information about Performance Tool products, visit the official Performance Tool website or contact their customer service department.