Introduction
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of the Sanwa OBSF-24 24mm Push Button. Designed for arcade game controllers and custom arcade setups, this high-quality component ensures reliable performance and a responsive gaming experience. Please read this manual thoroughly before installation and use.
Product Features
- Original Sanwa Quality: Manufactured in Japan, ensuring high standards and durability.
- Snap-in Installation: Designed for easy replacement of existing parts and straightforward integration into new builds.
- Smooth and Quiet Operation: Each button contains a non-clicking micro switch for a responsive and silent press.
- High Durability: Engineered for a lifespan of approximately 3,000,000 cycles.
- Fast Reactive Time: Provides quick response and reset for competitive gaming.
- Wide Compatibility: Suitable for XBOX360, PS3, PS2 controllers, and various arcade machines. Fits most Hori and MadCatz joysticks.
Setup and Installation
The Sanwa OBSF-24 push button features a snap-in design for simple installation. Follow these steps to integrate the button into your arcade panel or controller.
- Prepare Mounting Hole: Ensure your control panel has a 24mm diameter mounting hole. The button is designed for materials with a thickness between 2mm and 5mm.
- Insert Button: Gently push the button into the prepared hole from the top side of the panel until the snap-in tabs engage securely.
- Connect Wiring: Locate the two terminals on the micro switch at the bottom of the button. Connect your arcade wiring (typically a signal wire and a ground wire) to these terminals. The vertical microswitch has .110" lugs.
- Test Functionality: After connecting, test the button to ensure it registers inputs correctly within your system.
Image: Rear view of the Sanwa OBSF-24 button showing the microswitch and terminals for wiring.
Image: Technical drawing illustrating the dimensions of the Sanwa OBSF-24 push button, including mounting hole diameter and overall height.
Operating Instructions
Once installed and wired, the Sanwa OBSF-24 push button operates as a standard momentary switch. Press the button to activate its function within your arcade game or custom controller. The non-clicking micro switch ensures a smooth and responsive input.
Maintenance
The Sanwa OBSF-24 push button is designed for long-term durability with minimal maintenance. To ensure optimal performance:
- Cleaning: Periodically wipe the button surface with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Occasionally inspect the wiring connections to ensure they remain secure.
- Avoid Excessive Force: While durable, avoid applying excessive or unnecessary force to the button during operation.
Troubleshooting
If you encounter issues with your Sanwa OBSF-24 push button, consider the following troubleshooting steps:
- Button Not Responding:
- Check all wiring connections to ensure they are firmly attached to the micro switch terminals and the controller board.
- Verify that the micro switch is properly seated within the button housing.
- Test the button with a known working input or another button to isolate the issue.
- Intermittent Response:
- Inspect wiring for any loose connections or damage.
- Ensure the button is not obstructed and can fully depress and return to its original position.
Specifications
| Feature | Detail |
|---|---|
| Brand | SANWA |
| Model Name | OBSF-24 |
| Type | 24mm Push Button |
| Mounting Hole Diameter | 24mm |
| Overall Diameter | 33mm |
| Mounting Material Thickness | 2 to 5 mm |
| Micro Switch Type | Non-clicking |
| Terminal Size | .110" lugs |
| Life Time | 3,000,000 cycles |
| Compatible Devices | XBOX360, PS3, PS2 Controllers, Arcade machines |
| Place of Origin | Japan |
Warranty Information
Sanwa products are known for their quality and durability. Specific warranty terms may vary depending on the retailer and region of purchase. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation provided by your point of sale or contact Sanwa customer support.
Support
For technical assistance, installation queries, or further product information, please contact your authorized Sanwa distributor or the retailer from whom you purchased the product. You may also visit the official Sanwa website for additional resources and contact details.
