Product Overview
The Greenfield Overseeding Coated Seed Vital is designed to rejuvenate existing lawns and fill in bare patches. This product transforms old grass into a vibrant, new lawn. The entire seed is extra coated for enhanced performance and quick results.

Image: A 10 kg bag of Greenfield Sports Lawn Regeneration Coated Seed. The bag features the "Greenfield" logo, the product name "Nachsaat-Mantelsaat" (Overseeding Coated Seed), and indicates coverage for approximately 600 m². The design shows a vibrant green lawn and new grass sprouts, emphasizing its regenerative properties.
Setup and Preparation
Proper preparation of the area is crucial for optimal results before applying the Greenfield Coated Seed.
- Area Preparation: Prepare the area by removing any debris, stones, and weeds. Ensure the soil surface is clean and relatively level.
Operating Instructions
Follow these steps for effective application of the coated seeds:
- Seed Distribution: Distribute the seeds evenly over the desired area. Refer to the coverage guidelines for appropriate quantities:
- 1 kg covers approximately 60 m²
- 2 kg covers approximately 120 m²
- 5 kg covers approximately 300 m²
- 10 kg covers approximately 600 m²
- Soil Integration: Lightly work the seeds into the top layer of the soil. This can be done with a rake or by gently pressing them down to ensure good soil contact.
- Thorough Watering: Water the area thoroughly immediately after application. Ensure the soil remains consistently moist, especially during the germination period. Avoid waterlogging.
- Observe Growth: Allow time for the grass to grow. Germination typically begins within a few days, with full establishment taking several weeks depending on conditions.
Maintenance
Consistent care is essential for a healthy and vibrant lawn after overseeding.
- Watering: Maintain consistent moisture, especially during dry periods. Young grass is particularly sensitive to drought. Water deeply and less frequently once established.
- Mowing: Begin mowing once the new grass reaches an appropriate height (typically 8-10 cm or 3-4 inches). Avoid cutting more than one-third of the blade length at a time to prevent stress.
- Fertilization: Consider applying a suitable lawn fertilizer after the new grass is well-established, following the fertilizer manufacturer's instructions for timing and dosage.
- Weed Control: Address any new weed growth promptly to prevent competition with the young grass. Manual removal is recommended for young lawns.
Troubleshooting
If you encounter issues with grass growth, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor Germination | Insufficient watering, improper soil contact, extreme temperatures, old seeds. | Ensure consistent moisture, lightly rake seeds into soil, apply during optimal temperatures (spring/early autumn). Check seed expiry. |
| Uneven Growth | Uneven seed distribution, inconsistent watering, soil compaction, nutrient deficiencies. | Use a spreader for even distribution, ensure uniform watering, consider aerating compacted areas and soil testing for nutrients. |
| Weed Infestation | Existing weed seeds in soil, new weed introduction, insufficient initial preparation. | Thoroughly remove weeds before seeding, hand-pull new weeds, avoid using weed killers on young grass until established. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Greenfield |
| Item Weight | 10.05 Kilograms |
| Part Number | 2031 |
| Weight | 10 Kilograms |
| Manufacturer | Greenfield |
| Manufacturer Reference | 2031 |
| ASIN | B01FUMSATU |
| Available on Amazon.de since | 18. May 2016 |
| Discontinued Item (Production ceased by manufacturer) | No |
| Form | Coated Seed |
| Coverage | 600m² |
| Target Species | Lawn, Grass |