Product Overview
The Walker 51115 Exhaust Flex Connector is designed for universal application, providing a durable and reliable connection within your vehicle's exhaust system. Made from quality materials, it dampens vibrations and inhibits leaks, ensuring long-lasting performance.
Image: The Walker 51115 Exhaust Flex Connector, a flexible braided metal component with smooth ends for connection.
Key Features
- Universal Compatibility: Designed for broad application, ensuring fitment across various vehicle types. Users should verify product dimensions for specific vehicle compatibility.
- Vibration Dampening: Features flex-lock construction to effectively dampen exhaust system vibrations and movement, reducing stress on components.
- Leak Inhibition: Engineered to inhibit leaks within the exhaust system, contributing to optimal performance and reduced emissions.
- Quality Construction: Manufactured from stainless steel for enhanced durability and extended service life.
- Seamless Connection: Specifically designed for connecting exhaust pipes and/or tubing, providing a secure and efficient joint.
- Burr-Free Finish: Ensures proper fitment and ease of installation due to its smooth, burr-free construction.
Image: Illustration highlighting the use of premium materials in the construction of Walker exhaust components, including the flex connector and other pipe sections.
Package Contents
Upon opening the package, verify that all components are present and undamaged.
- 1 x Walker 51115 Exhaust Flex Connector
Image: Various Walker exhaust accessories, including a U-clamp, a flange, a small connector pipe, and a set of bolts and nuts, often used in conjunction with the flex connector.
Installation Guide
1. Pre-Installation Checks
Before beginning installation, ensure you have the correct part for your vehicle. It is recommended to consult your vehicle's service manual for specific exhaust system diagrams and procedures.
- Verify the dimensions of the Walker 51115 flex connector against your existing exhaust pipe. The connector features 2.25" Inlet (ID) and 2.25" Outlet (ID).
- Gather all necessary tools, which may include wrenches, pipe cutters, welders (if applicable for weld-on installation), and safety equipment.
- Ensure the vehicle is safely lifted and supported on jack stands or a lift. Allow the exhaust system to cool completely before handling.
Image: A hand using a caliper to measure the diameter of an existing exhaust pipe, emphasizing the importance of verifying dimensions before installation.
2. Removal of Old Component (if applicable)
If replacing an existing flex connector or section of pipe, carefully remove the old component. This may involve cutting the pipe or unbolting flanges.
3. Installation of Walker 51115 Flex Connector
The Walker 51115 flex connector is designed for either weld-on or clamp-on installations, depending on your specific setup and preference.
- Weld-On Installation: Position the flex connector into the exhaust system. Ensure proper alignment and secure the connector by welding it to the existing pipes. Professional welding is recommended.
- Clamp-On Installation: Slide the flex connector onto the exhaust pipes. Use appropriate exhaust clamps (not included) to secure the connection. Tighten clamps evenly to ensure a leak-free seal.
Image: A person wearing a welding helmet and protective gear, actively welding an exhaust component, illustrating a weld-on installation method.
Image: A selection of exhaust clamps, including band clamps and U-bolt clamps, used for securing exhaust components in a clamp-on installation.
4. Post-Installation Checks
- Ensure all connections are secure and free from leaks.
- Check for proper clearance around the flex connector to avoid contact with other vehicle components.
- Lower the vehicle safely.
Maintenance
The Walker 51115 Exhaust Flex Connector is designed for durability and requires minimal maintenance. Regular inspection of your exhaust system is recommended to ensure optimal performance and longevity.
- Visual Inspection: Periodically inspect the flex connector for signs of wear, corrosion, cracks, or damage. Look for any black soot around the connections, which may indicate a leak.
- Check for Vibrations: If unusual vibrations or noises are detected from the exhaust system, inspect the flex connector and surrounding components for looseness or damage.
- Cleanliness: Keep the area around the flex connector free from excessive dirt, debris, or road salt, which can accelerate corrosion.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Exhaust Leak Noise | Loose clamps or welds; damaged flex connector; improper fitment. | Tighten clamps; inspect welds for cracks and repair if necessary; replace damaged flex connector; ensure correct part was installed. |
| Excessive Vibration | Damaged flex connector; loose exhaust hangers; misaligned exhaust system. | Inspect and replace flex connector if damaged; check and replace worn or broken exhaust hangers; realign exhaust system. |
| Rattling Noise | Flex connector contacting other vehicle components; loose heat shield. | Adjust flex connector position to ensure clearance; secure or replace loose heat shields. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Walker |
| Model Number | 51115 |
| UPC | 086387511155 |
| Inlet Diameter | 2.25 inches (ID) |
| Outlet Diameter | 2.25 inches (ID) |
| Material | Stainless Steel |
| Item Weight | 1 pound |
| Product Dimensions | 6 x 3.25 x 3.25 inches |
| Installation Type | Universal (Weld-On or Clamp-On) |
| Manufacturer | Tenneco (Dynomax, Walker, Thrush) |
Warranty and Support
For information regarding product warranty, technical support, or replacement parts, please contact Walker customer service or visit the official Walker website. Keep your purchase receipt and product model number (51115) readily available for any inquiries.
Official Website: www.walkerexhaust.com
