Introduction
The Definitive Technology BP-9060 is a high-performance tower speaker designed for home theater systems and high-fidelity music playback. It features a built-in powered 10-inch subwoofer and dual bass radiators, eliminating the need for a separate subwoofer. The patented Forward-Focused Bipolar Array technology aims to create a broad and engaging soundstage. This speaker also includes a docking port for an optional A90 Dolby Atmos/DTS:X enabled speaker module, allowing for three-dimensional surround sound expansion.
Figure 1: Front view of the Definitive Technology BP-9060 Tower Speaker.
Setup
Unpacking the Speaker
Carefully remove the speaker and all accessories from the packaging. The box should contain:
- Tower loudspeaker
- 6.5' AC power cord
- Top-plate (installed)
- Stabilizer base
- 4 Floor guides
- 4 Carpet spikes
- 4 Screws
- 4 Nuts
- Owner's Manual
Speaker Placement
Position the BP-9060 tower speakers in your listening area to optimize the soundstage. The Forward-Focused Bipolar Array is designed to provide wide sound dispersion, making placement flexible. Ensure adequate space around the speakers for optimal performance and to accommodate the stabilizer base, which is 11 inches wide. The speaker itself is 6 inches wide and 44.5 inches high.
Figure 2: Dimensions of the BP-9060 Tower Speaker.
Connections
Connect the speaker to your audio receiver or amplifier using appropriate speaker cables. The BP-9060 features wired connectivity. Each speaker has an integrated powered subwoofer, requiring connection to a power outlet using the provided AC power cord.
Optional Dolby Atmos/DTS:X Module
For three-dimensional surround sound, an optional A90 height speaker module (sold separately) can be integrated. The BP-9060 tower speaker includes a built-in docking port specifically for this purpose.
Figure 3: Illustration of the optional A90 height module for Dolby Atmos/DTS:X integration.
Operating
Intelligent Bass Control
The BP-9060 features Intelligent Bass Control, a proprietary technology that allows you to customize the lowest frequencies without compromising the clarity of the mid-range. Adjust the bass level according to your preference and room acoustics.
Figure 4: Visual representation of Intelligent Bass Control.
General Operation
Once connected and powered, the BP-9060 speakers will reproduce audio from your connected source. Adjust volume and other audio settings via your receiver or amplifier. The speaker's design, including the Forward-Focused Bipolar Array, aims to deliver consistent sound quality across a wide listening area.
Video 1: Overview of the Definitive Technology BP 9000 Series, demonstrating key features and sound reproduction.
Maintenance
To maintain the appearance and performance of your BP-9060 speakers, follow these guidelines:
- Cleaning: Gently wipe the speaker cabinet with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Grille Care: The speaker grille is a thin cloth. Handle with care to avoid damage to the speaker cones underneath.
- Placement: Avoid placing objects on top of the speaker, especially if an A90 height module is installed or intended for future installation.
Troubleshooting
Speakers 'Pop' When Entering Stand-by Mode
If your speakers produce a 'pop' sound when entering stand-by mode (turning off), this may indicate an issue with the connected receiver or amplifier. Ensure your receiver is compatible and properly configured for powered speakers. Consult your receiver's manual or contact customer support for further assistance.
No Sound Output
- Verify all power cords are securely plugged into both the speaker and a working electrical outlet.
- Check all audio connections between the speaker and your receiver/amplifier.
- Ensure the receiver/amplifier is powered on and set to the correct input source.
- Confirm that the volume on both the speaker (if applicable) and the receiver/amplifier is not muted or set too low.
Specifications
| Feature | Specification |
|---|---|
| Brand | Definitive Technology |
| Model Number | BP9060 |
| Speaker Type | Floor Standing, Tower Speaker with Subwoofer |
| Speaker Maximum Output Power | 600 Watts |
| Frequency Response | 40000 Hz |
| Connectivity Technology | Wired |
| Audio Output Mode | Surround |
| Enclosure Material | Aluminum |
| Subwoofer Diameter | 10 Inches |
| Woofer Diameter | 10 Inches |
| Tweeter Diameter | 1 Inches |
| Impedance | 8 Ohms |
| Power Source | Corded Electric |
| Item Dimensions (D x W x H) | 11"D x 13"W x 44.5"H |
| Item Weight | 56 Pounds |
| Color | Black |
| Specific Uses For Product | Home Theater Systems and High-fidelity Music Playback |
Warranty & Support
Warranty Information
The Definitive Technology BP-9060 Tower Speaker comes with the following limited warranties:
- Cabinet Warranty: 5 years
- Drivers Warranty: 5 years
- Electronics Warranty: 3 years
Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the full warranty document included with your product or visit the official Definitive Technology website.
Customer Support
For technical assistance, troubleshooting, or warranty service, please contact Definitive Technology customer support. Contact information can typically be found in the included owner's manual or on the official brand website.
