1. Introduction
Thank you for choosing the Novellini Dress Plus multifunctional hydromassage shower column. This manual provides essential information for the safe installation, operation, and maintenance of your new shower system. Please read these instructions carefully before installation and keep them for future reference.
The Novellini Dress Plus is a sophisticated wall-mounted shower column featuring a thermostatic mixer, vertical and dorsal hydromassage jets, a hand shower with a flexible hose, a waterfall function, and a rain shower head, designed to enhance your bathing experience.
Figure 1: Novellini Dress Plus Shower Column. This image shows the overall design and features of the shower column, including the main panel, hand shower, and controls.
2. Safety Information
- Installation must be performed by a qualified professional in accordance with local plumbing and building codes.
- Ensure all water connections are secure and leak-free before use.
- The shower column is heavy (approximately 90 kg). Handle with care during installation and ensure the wall structure can support its weight.
- Do not use abrasive cleaners or solvents on any part of the shower column, as this may damage the finish.
- Ensure proper water pressure is maintained (2-5 bar dynamic pressure) for optimal performance.
- Always test water temperature before stepping into the shower to prevent scalding.
3. Package Contents
Verify that all components are present and undamaged before beginning installation:
- Novellini Dress Plus Shower Column (main unit)
- Hand Shower with Flexible Hose
- Mounting Hardware (screws, wall plugs, brackets)
- User Manual (this document)
4. Setup and Installation
This shower column is designed for wall-mounted installation. Professional installation is highly recommended.
4.1 Pre-Installation Checks
- Ensure the installation wall is structurally sound and capable of supporting the shower column's weight (approx. 90 kg).
- Verify that hot and cold water supply lines are present and accessible at the desired installation height. The connections should be 1/2 inch.
- Confirm that your water system provides an optimal dynamic pressure between 2 and 5 bar for proper function of all features.
4.2 Mounting the Shower Column
- Carefully unpack the shower column and inspect for any damage.
- Refer to the technical diagram (Figure 2) for precise measurements and recommended mounting heights for water connections and brackets.
- Mark the drilling points on the wall according to the diagram.
- Drill holes and insert appropriate wall plugs suitable for your wall type.
- Secure the mounting brackets to the wall.
- Connect the hot and cold water supply lines to the corresponding inlets on the back of the shower column (labeled 1 for hot, 2 for cold in Figure 2). Use appropriate seals and tighten connections securely to prevent leaks.
- Carefully lift and attach the shower column to the wall brackets. Ensure it is level and securely fastened.
- Connect the flexible hose to the hand shower and its outlet on the column.
- Turn on the main water supply and check all connections for leaks.
Figure 2: Technical Diagram. This diagram illustrates the dimensions of the shower column, recommended installation heights (H), and water connection points (1 for hot, 2 for cold).
5. Operating Instructions
The Novellini Dress Plus shower column offers multiple functions controlled by its integrated thermostatic mixer and diverter handles.
5.1 Thermostatic Mixer
- The thermostatic mixer allows you to set and maintain a precise water temperature, preventing sudden changes in temperature.
- Rotate the temperature control handle to adjust the desired water temperature. Most thermostatic mixers have a safety stop at 38°C (100°F) to prevent accidental scalding. Press the override button to select higher temperatures.
5.2 Function Diverter
Use the diverter handle(s) to switch between the various shower functions:
- Rain Shower Head: Provides a wide, gentle rainfall effect from the overhead shower.
- Waterfall Function: Delivers a broad, cascading sheet of water.
- Vertical Hydromassage Jets: Targeted jets for a stimulating back massage.
- Dorsal Hydromassage Jets: Additional jets for a comprehensive back massage.
- Hand Shower: For focused rinsing and cleaning.
Rotate the diverter handle to select your preferred function. Some models may allow multiple functions simultaneously, while others require selecting one at a time.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Novellini Dress Plus shower column.
6.1 Cleaning
- Clean the acrylic surfaces and brass components with a soft, damp cloth and a mild, non-abrasive cleaning agent.
- Avoid using harsh chemicals, abrasive sponges, or solvents, as these can damage the finish and materials.
- For stubborn water spots, use a solution of white vinegar and water, then rinse thoroughly.
6.2 Descaling
- Over time, mineral deposits (limescale) may accumulate in the shower nozzles and jets.
- Many nozzles are designed with flexible silicone nubs that can be gently rubbed to dislodge limescale.
- For more extensive descaling, use a descaling solution specifically designed for shower fixtures, following the manufacturer's instructions.
6.3 General Checks
- Periodically check all water connections for any signs of leaks. Tighten if necessary.
- Ensure the hand shower hose is free from kinks or damage.
7. Troubleshooting
If you encounter issues with your Novellini Dress Plus shower column, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure from shower functions. | Insufficient dynamic water pressure; clogged nozzles. | Check main water supply pressure. Clean shower nozzles and jets for limescale buildup. Ensure optimal dynamic pressure of 2-5 bar. |
| Water temperature fluctuates or is incorrect. | Thermostatic mixer issue; hot/cold water supply imbalance. | Verify hot and cold water supply. Adjust thermostatic mixer settings. If problem persists, professional inspection may be required. |
| Leaks from connections. | Loose connections; damaged seals. | Turn off water supply. Carefully tighten all connections. Replace seals if damaged. If leaks persist, contact a professional plumber. |
| No water from a specific function. | Diverter valve stuck or faulty; clogged outlet. | Ensure the diverter handle is fully engaged for the desired function. Check for blockages in the specific outlet. |
If you are unable to resolve an issue using these troubleshooting steps, please contact Novellini customer support or a qualified plumber.
8. Specifications
| Brand | Novellini |
| Model | Dress Plus (DRESS1VTF-28) |
| Type | Multifunctional Hydromassage Shower Column |
| Mounting Type | Wall-mounted |
| Color | Black |
| Column Material | Acrylic |
| Handle Material | Brass |
| Dimensions (W x D x H) | 28 cm x 55 cm x 213 cm |
| Shower Head Size | 20 cm x 20 cm |
| Water Connections | 1/2" Hot, 1/2" Cold |
| Optimal Dynamic Pressure | 2 - 5 bar |
| Maximum Pressure | 5 bar |
| Item Weight | 90 kg (90000 Grams) |
| Functions | Thermostatic Mixer, Vertical Hydromassage, Dorsal Hydromassage, Hand Shower, Waterfall, Rain Shower |
9. Warranty and Support
Novellini products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Novellini website. In case of technical issues or questions not covered in this manual, please contact your retailer or Novellini customer support for assistance.
Please have your model number (DRESS1VTF-28) and purchase date ready when contacting support.
