1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Semi-Flushmount Ceiling Fixture. Designed for indoor use, this fixture features a white finish and an elegant etched frosted glass shade, providing diffused light suitable for various living spaces.
Image 1.1: The Project Source Semi-Flushmount Ceiling Fixture, showcasing its white base and decorative etched frosted glass shade.
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.
- WARNING: To avoid electric shock, disconnect power at the circuit breaker or fuse box before installation.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Do not install this fixture in wet or damp locations.
- Handle glass components with care to prevent breakage and injury.
- Ensure the fixture is securely mounted to a structural element of the ceiling.
- Use only the type and wattage of bulbs specified for this fixture.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.
- Semi-Flushmount Ceiling Fixture Body (1)
- Etched Frosted Glass Shade (1)
- Mounting Hardware Kit (includes screws, wire nuts, mounting bracket) (1 set)
- Decorative Finial (1)
- Instruction Manual (this document) (1)
4. Setup and Installation
Tools Required (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses, ladder.
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the light fixture you are replacing or installing. Turn off the power completely. Verify power is off using a voltage tester.
- Prepare Mounting: If replacing an existing fixture, carefully remove it. Attach the mounting bracket (if not pre-attached) to the electrical junction box in the ceiling using the provided screws. Ensure the bracket is secure.
- Wire Connections:
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting bracket) using a wire nut.
- Carefully tuck all wires into the junction box.
- Attach Fixture Body: Align the fixture body with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the ceiling and stable.
- Install Bulbs: Insert the recommended type and wattage of light bulbs (not included) into the sockets. Do not exceed the maximum wattage indicated on the fixture.
- Attach Glass Shade: Carefully place the etched frosted glass shade onto the fixture body. Secure it in place using the decorative finial by screwing it onto the threaded rod at the bottom of the fixture until snug. Do not overtighten.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box. Test the light fixture.
5. Operating Instructions
This Project Source ceiling fixture is designed for simple operation. Once properly installed and powered, it can be controlled via a standard wall switch. If your electrical setup includes a dimmer switch, ensure it is compatible with the type of bulbs you are using.
The product specifications indicate a "Remote" control method. If your specific model includes a remote control, please refer to the separate remote control instructions for pairing and operation. Otherwise, the fixture operates solely via the wall switch.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your ceiling fixture.
- Cleaning: Always turn off power to the fixture and allow it to cool before cleaning. Wipe the fixture body with a soft, dry cloth. For the glass shade, use a mild glass cleaner applied to a cloth (not directly to the glass) and wipe gently. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure power is off and bulbs are cool before attempting to replace them. Unscrew the decorative finial and carefully remove the glass shade. Replace old bulbs with new ones of the correct type and wattage. Reattach the glass shade and finial.
7. Troubleshooting
If you encounter issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; Loose wiring; Faulty bulb; Faulty wall switch. | Check circuit breaker/fuse. Ensure all wire connections are secure. Replace bulb. Test wall switch. |
| Light flickers. | Loose bulb; Incorrect bulb type for dimmer; Loose wiring. | Tighten bulb. Ensure bulbs are dimmable if using a dimmer. Check wire connections. |
| Glass shade is loose. | Finial not tightened sufficiently. | Gently tighten the decorative finial until the shade is secure. Do not overtighten. |
If the problem persists after attempting these solutions, consult a qualified electrician or contact customer support.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Project Source |
| Model Number | 0344428 |
| UPC | 848507000839 |
| Fixture Type | Semi-Flushmount Ceiling Fixture |
| Material | Glass (Shade) |
| Style | Modern |
| Light Fixture Form | Ceiling |
| Power Source | Corded Electric |
| Control Method | Remote (Note: Remote not included, refers to potential compatibility) |
| Shade Material | Glass |
| Item Weight | 2.19 pounds (approx. 0.99 kg) |
| Product Dimensions | 11.73 x 5.83 x 11.73 inches (approx. 29.8 x 14.8 x 29.8 cm) |
| Mounting Type | Ceiling Mount |
| Manufacturer | LG Sourcing Inc. |
| Date First Available | May 17, 2016 |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact Project Source customer service. Keep your purchase receipt for warranty claims.
For further assistance, you may visit the manufacturer's website or contact their support line. Contact details are typically found on the product packaging or the manufacturer's official website.
