Product Overview
The Roll-N-Lock Cargo Manager is an optional accessory designed to work seamlessly with Roll-N-Lock retractable truck bed covers. This movable truck bed divider allows for efficient organization and containment of lightweight cargo within your truck bed.
It can be positioned at various points along the bed's length, providing flexibility for different cargo sizes. Operation is simple, controlled from the driver's side, with a spring-activated mechanism that automatically secures the divider in place.
The Cargo Manager is lightweight and can be easily removed when hauling larger items that require the full bed length. When used in conjunction with a Roll-N-Lock cover, it enhances cargo security by preventing items from shifting during transit.
Image: The Roll-N-Lock Cargo Manager installed in the bed of a red pickup truck, demonstrating its primary function as a bed divider.
Compatibility
This Cargo Manager (Model CM571) is specifically designed for:
- 2007 - 2021 Toyota Tundra (6' 7" Bed / 78.7")
- Important: This product is not compatible with Toyota Tundra models equipped with the Original Equipment (OE) track system or the Trail Edition.
- Requires: A Roll-N-Lock retractable truck bed cover for proper installation and function. It is not intended for stand-alone use or with other truck bed cover brands.
Setup and Installation
The Cargo Manager attaches to the rails of compatible Roll-N-Lock truck bed covers. While specific installation steps may vary slightly depending on your Roll-N-Lock cover model, the general process involves securing the Cargo Manager's rails to the existing cover rails.
For detailed, step-by-step installation instructions, please refer to the dedicated installation guide provided with your Roll-N-Lock truck bed cover or visit the official RealTruck support website.
Image: A close-up view of a hand engaging the control levers on the Cargo Manager, illustrating the mechanism for repositioning the divider.
Note: Some users have successfully adapted the Cargo Manager for use with other bed covers by modifying the mounting brackets and using T-slot nuts for the truck's bed rail system. However, this is not officially supported and may void your warranty. Proceed with caution if attempting such modifications.
Operating Instructions
The Cargo Manager is designed for easy operation from the driver's side of the truck bed.
- Repositioning the Divider: To move the Cargo Manager, simply squeeze the control levers located on the driver's side. This disengages the pins from the sidetracks.
- Sliding the Divider: Once the levers are squeezed, the divider can be smoothly glided along the length of the truck bed rails.
- Securing the Divider: Release the control levers at your desired position. The spring-activated mechanism will automatically pin the divider to the nearest available slot in the sidetracks, securing it firmly in place.
- Cargo Containment: Use the divider to create compartments within your truck bed, preventing items from sliding forward or backward during acceleration, braking, or turns.
Image: A red cooler secured against the Cargo Manager using bungee cords, demonstrating its effectiveness in containing cargo.
Removal for Large Items: The Cargo Manager weighs approximately 11 pounds and can be easily and quickly removed from the truck bed when you need to transport larger items that cannot slide underneath it.
Maintenance
The Roll-N-Lock Cargo Manager is constructed from durable aluminum and requires minimal maintenance.
- Cleaning: Periodically clean the Cargo Manager with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
- Lubrication: Ensure the sliding mechanism and control levers operate smoothly. If any stiffness is observed, a silicone-based lubricant can be applied sparingly to the sliding surfaces and pivot points.
- Inspection: Regularly inspect the unit for any signs of wear, damage, or loose components. Address any issues promptly to maintain optimal performance and safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cargo Manager does not slide smoothly. | Debris in tracks; lack of lubrication; bent rails. | Clean tracks thoroughly. Apply silicone lubricant to sliding surfaces. Inspect rails for damage; contact support if bent. |
| Divider does not lock into place. | Pins obstructed; spring mechanism issue. | Ensure no debris is blocking the pin holes. Check if the control levers are fully releasing. |
| Cargo Manager feels loose after installation. | Mounting hardware not tightened sufficiently. | Re-check and tighten all mounting hardware according to the installation guide for your Roll-N-Lock cover. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact RealTruck customer support.
Specifications
- Model: Cargo Manager (CM571)
- Brand: RealTruck / Roll-N-Lock
- Material: Aluminum
- Exterior Finish: Aluminum
- Item Weight: Approximately 3 pounds
- Product Dimensions: 66 x 18 x 3 inches (approximate)
- Compatibility: Designed for 2007 - 2021 Toyota Tundra (6' 7" Bed / 78.7") without OE track system or Trail Edition. Requires Roll-N-Lock Tonneau Cover.
- UPC: 725478162783
Warranty Information
The Roll-N-Lock Cargo Manager is backed by a three-year warranty provided by Roll-N-Lock. This warranty covers defects in materials and workmanship under normal use.
For specific warranty terms, conditions, and claim procedures, please refer to the warranty documentation included with your purchase or contact Roll-N-Lock / RealTruck customer service directly.
Support and Contact
For further assistance, technical support, or inquiries regarding your Roll-N-Lock Cargo Manager, please contact RealTruck customer support.
You can often find additional resources, FAQs, and contact information on the official RealTruck website:
Image: The RealTruck and Roll-N-Lock brand logos, representing the manufacturer and distributor.
