Eagle One E300891200

Eagle One Car Interior Detailer

Model: E300891200

User Manual

1. Introduction

The Eagle One Car Interior Detailer is an aerosol spray product designed to restore the factory shine to your vehicle's interior plastic and vinyl surfaces. This one-step detailer provides a high-gloss finish without leaving greasy residue, and it helps to conceal minor scuffs and scratches, enhancing the overall appearance of your car's interior.

Eagle One Interior Detailer 12 oz can

Image 1.1: Front view of the Eagle One Interior Detailer 12 oz aerosol can. The label features the Eagle One logo and text indicating it's an interior detailer that sprays and shines, restoring factory look and helping hide scuffs on interior plastics.

2. Safety Information

DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. SKIN IRRITANT. CONTENTS UNDER PRESSURE. Read precautions carefully before use.

  • KEEP OUT OF REACH OF CHILDREN AND PETS.
  • Contains: Propane, Butane, and Heptane. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.
  • Keep away from heat, sparks, open flames, and other ignition sources.
  • Pressurized container: Do not puncture or incinerate (burn) container, even after use. Do not store above 120°F (49°C) or in direct sunlight.
  • Avoid contact with the eyes. If contact occurs, flush with water for 15 minutes.
  • Avoid prolonged contact with skin. Use with adequate ventilation. Open car doors and windows during use and until the vapor is gone. Do not smoke while using.
  • Wash thoroughly with soap and water after handling. Wear protective gloves, clothing, eye protection, and face protection.
  • Use outdoors or in a well-ventilated area.
  • FIRST AID: If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. If on skin: Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If swallowed: Call a POISON CENTER or doctor if you feel unwell. Rinse mouth with water. Do NOT induce vomiting.
  • Contains <0.5% phosphorus by weight. For more ingredient information, visit www.energizer.com/sds or call 1-800-383-7323.

WARNING: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Back of Eagle One Interior Detailer can with safety warnings and instructions

Image 2.1: Back view of the Eagle One Interior Detailer can, displaying detailed safety warnings, first aid instructions, and usage tips. This includes information on flammability, pressure, and chemical exposure warnings.

3. What's in the Box

The product package contains:

  • One (1) 12 oz can of Eagle One Interior Auto Detailer Car Spray.

4. Setup

Before applying the Eagle One Car Interior Detailer, ensure the following preparatory steps are completed:

  1. Clean the Surface: For optimal results, vacuum the interior surfaces to remove loose dirt and debris. Wipe down plastic and vinyl areas with a clean, dry microfiber cloth to remove any dust or light grime.
  2. Shake Can: Shake the aerosol can well for several seconds before each use to ensure proper mixing of the contents.
  3. Ventilation: Ensure adequate ventilation by opening car doors and windows during application and until the vapor has dissipated.

5. Operating Instructions

Follow these steps for effective application of the interior detailer:

  1. Prepare Surface: As mentioned in the setup, ensure the surface is clean and dry.
  2. Apply Detailer: Hold the can approximately 6-8 inches from the surface and spray a light, even mist directly onto the plastic and vinyl surfaces. The aerosol formula is designed to reach into crevices and air vents for thorough coverage.
  3. Choose Your Finish:
    • For a High-Gloss Finish: Allow the product to dry naturally. No wiping is necessary. The detailer will leave a high-gloss coating that feels dry to the touch.
    • For a Satin Finish: Immediately after spraying, gently wipe the treated surface with a clean, dry microfiber towel to achieve a subtle, satin look.
  4. Address Overspray: Avoid spraying on glass, painted surfaces, or fabric. If overspray occurs, wipe it off immediately with a clean cloth.
Car interior air vents with text 'HIGH SHINE. HIDES SCUFFS. NO GREASY RESIDUE.'

Image 5.1: Close-up of car interior air vents, illustrating the product's ability to provide high shine, hide scuffs, and leave no greasy residue on hard-to-reach plastic surfaces.

Split image showing car dashboard with two finishes: 'LEAVE ON FOR HIGH GLOSS' and 'WIPE OFF FOR SATIN FINISH'

Image 5.2: A visual comparison demonstrating the two possible finishes. The left side shows a dashboard with a high-gloss finish achieved by leaving the product on, while the right side shows a satin finish achieved by wiping off the product.

The detailer is safe for use on all plastic and vinyl surfaces within the vehicle's interior, including dashboards, consoles, door panels, and trim.

Car interior with engine start/stop button and text 'SAFE FOR ALL PLASTIC & VINYL SURFACES'

Image 5.3: A close-up of a car's interior, highlighting an engine start/stop button and surrounding plastic, emphasizing that the product is safe for all plastic and vinyl surfaces.

6. Maintenance

Proper storage and handling will ensure the longevity and effectiveness of the product:

  • Storage: Store the aerosol can in a cool, dry place, away from direct sunlight, heat sources, and temperatures exceeding 120°F (49°C).
  • Cap Security: Always ensure the cap is securely placed on the can after each use to prevent accidental discharge and maintain product integrity.

7. Troubleshooting

Refer to the following common issues and their solutions:

  • Issue: Uneven finish or streaks appear after application.
    Solution: Ensure the surface was thoroughly cleaned and dry before application. Apply a light, even mist. If a satin finish is desired, wipe immediately and evenly with a clean microfiber towel. Avoid over-applying the product.
  • Issue: Product does not spray or nozzle is clogged.
    Solution: Check if the nozzle opening is obstructed. If so, gently clean it with a thin wire or rinse the nozzle under warm water. Ensure the can is shaken well before use and stored at an appropriate temperature. If the can is empty, replace it.

8. Specifications

AttributeDetail
BrandEagle One
ModelE300891200
Item Weight12 ounces
Product Dimensions2.75 x 2.75 x 9.5 inches
Manufacturer Part Number842849
ASINB01FKKB2CE
Volume12 oz (340g)
FormAerosol Spray
ApplicationInterior plastic and vinyl surfaces

9. Warranty and Support

For specific warranty information, please refer to the product packaging or the official Eagle One website, as warranty terms may vary.

For any questions, technical support, or assistance with your Eagle One Car Interior Detailer, please contact customer service:

  • Customer Service Phone: 1-800-383-7323
  • Manufacturer: Eagle One (a brand of Energizer)

©2023 Energizer. Eagle One is a trademark owned by Energizer Brands, LLC. All rights reserved.