1. Important Safety Instructions
Please read and save these instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or injury.
- Always unplug the fan from the power outlet before cleaning, servicing, or moving it.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.
- Do not block air openings or operate near curtains or other materials that could block airflow.
- This fan is ETL listed, ensuring it meets recognized safety standards.
- Built-in overload protection is provided for safety during extended use.
2. Product Overview
The Hurricane Pro 20-inch Heavy-Duty High Velocity Floor Fan is designed for powerful and efficient air circulation in various environments.
Features:
- Powerful Airflow: 5300 CFM and 1450 RPM for efficient air circulation.
- Controllable Fan Speed: Three speed settings for tailored ventilation.
- Adjustable Tilt: Direct the airflow precisely where needed.
- Durable Construction: Heavy-duty aluminum blades and rugged all-metal design.
- Easy Assembly and Mobility: Tube base with rubber feet and built-in handle for portability.
- Safety Features: ETL listed with built-in overload protection.
Components:
- Fan Head with Grille and Blades
- Motor Housing
- Tube Base (U-shaped stand)
- Rubber Feet (pre-attached or to be attached to base)
- Power Cord (6 ft)
- Speed Control Switch (Pull Chain)
A front view of the Hurricane Pro 20-inch Heavy-Duty High Velocity Floor Fan, showcasing its black metal grille and silver-colored aluminum blades.
An image highlighting the 20-inch size of the Hurricane Pro floor fan and its 3-speed cooling capability.
3. Setup and Assembly
The Hurricane Pro Floor Fan is designed for quick and easy assembly.
Assembly Steps:
- Unpack all components from the box and ensure all parts are present.
- Attach the U-shaped tube base to the main fan body. Align the holes and secure with the provided screws or fasteners.
- Ensure the rubber feet are securely attached to the bottom of the tube base for stability and to prevent scratching surfaces.
- Place the fan on a stable, level surface.
A close-up view of the fan, pointing out its heavy-duty aluminum blades and robust construction, along with the easily assembled tube base equipped with rubber feet for stability.
4. Operating Instructions
Follow these steps to operate your Hurricane Pro Floor Fan.
Powering On/Off:
- Plug the 6 ft power cord into a standard 120V electrical outlet.
- Locate the pull chain switch, typically at the rear or side of the fan motor housing.
- Pull the chain once to turn the fan on to its lowest speed setting.
- Continue pulling the chain to cycle through speed settings (Low, Medium, High) and then Off.
Speed Control:
The fan features three distinct speed settings to adjust airflow intensity:
- Low: For gentle air circulation.
- Medium: For moderate airflow.
- High: For maximum air velocity (5300 CFM).
Adjusting Tilt:
The fan head can be tilted to direct airflow upwards or downwards. Loosen the adjustment knobs on either side of the fan head, tilt to the desired angle, and then securely tighten the knobs.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your fan.
Cleaning:
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to clean the exterior surfaces of the fan.
- To clean the fan blades, the front grille can be removed. Refer to the assembly section for reverse steps if needed. Use a soft cloth to wipe dust from the blades.
- Do not use abrasive cleaners or solvents, as these may damage the finish.
- Ensure all parts are completely dry before plugging the fan back in.
Storage:
- Store the fan in a cool, dry place when not in use.
- If storing for an extended period, cover the fan to protect it from dust.
6. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power; Loose plug; Overload protection tripped | Check power outlet; Ensure plug is fully inserted; Reset circuit breaker or wait for fan to cool down. |
| Reduced airflow | Dirty blades/grille; Obstruction | Clean fan blades and grilles; Remove any obstructions. |
| Unusual noise or vibration | Loose parts; Fan not on level surface; Debris in fan | Check for loose screws and tighten; Place fan on a stable, level surface; Unplug and inspect for debris. |
7. Specifications
Detailed technical specifications for the Hurricane Pro 20-inch Heavy-Duty High Velocity Floor Fan.
| Specification | Value |
|---|---|
| Brand | Hurricane |
| Model Name | Pro |
| Style | 20" Pro Heavy Duty |
| Electric Fan Design | Floor Fan |
| Power Source | Corded Electric |
| Product Dimensions | 15"D x 24"W x 24"H |
| Special Feature | Adjustable Tilt, High Velocity |
| Wattage | 145 watts |
| Number of Blades | 3 |
| Air Flow Capacity | 5300 Cubic Feet Per Minute |
| Speed | 1450 RPM |
| Voltage | 120V |
| Switch Type | Pull Chain |
| Item Weight | 14.2 Pounds |
| Cable Length | 6 Feet |
| Indoor/Outdoor Usage | Indoor |
| Specification Met | ETL |
| UPC | 849969013832 |
| ASIN | B01FFT0B7W |
8. Warranty and Support
This Hurricane Pro Floor Fan comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical support, replacement parts, or warranty claims, please contact Hurricane customer service. Contact information can typically be found on the product packaging or the official Hurricane brand website.
You can visit the official Hurricane Store for more information: Hurricane Store on Amazon
